Date: Mon, 1 Jul 2013 22:30:21 -0400 From: Chris Ross <cross+freebsd@distal.com> To: gpalmer@freebsd.org Cc: "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org>, freebsd-sparc64@freebsd.org Subject: Re: Problems booting into ZFS on recent stable/9 Message-ID: <A97038B3-836A-466B-BD96-95C07548E973@distal.com> In-Reply-To: <951F81F6-5301-4DF4-8822-0567FDABA4DB@distal.com> References: <951F81F6-5301-4DF4-8822-0567FDABA4DB@distal.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon Jul 1 19:51:45 UTC 2013, Gary Palmer <gpalmer@freebsd.org> = wrote: > What is the interface that the disk(s) that ZFS are on? If it's the > AcerLabs ATA controller, then there are no disks found. There is an > earlier ATA bus (at a guess from the fact ata2 and ata3 are shown = above), > however I don't see any disks detected. Normally ATA and SCSI/SAS = disks > are probed asynchronously near the end of the boot and that appears > to be missing Right you are. That's likely the core of the problem, then. On my = netboot of an older kernel, I see more at the end as you describe: atapci0: <AcerLabs M5229 UDMA66 controller> port = 0x10200-0x10207,0x10218-0x1021b,0x10210-0x10217,0x10208-0x1020b,0x10220-0x= 1022f at device 13.0 on pci0 atapci0: using PIO transfers above 137GB as workaround for 48bit DMA = access bug, expect reduced performance ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 nexus0: <syscons> type unknown (no driver attached) rtc0: <Real-Time Clock> at port 0x70-0x71 on isa0 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 on isa0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 43 on isa0 ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is = present; to enable, add "vfs.zfs.prefetch_disable=3D0" to = /boot/loader.conf. ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounter "tick" frequency 500000000 Hz quality 1000 Event timer "tick" frequency 500000000 Hz quality 1000 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 ugen0.1: <AcerLabs> at usbus0 uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on = usbus0 ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <Maxtor 5A320J0 RAM51VV0> ATA-7 device ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytesuhub0: 2 ports with 2 = removable, self powered) ada0: 308921MB (632672208 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ata3 bus 0 scbus1 target 0 lun 0 ada1: <Maxtor 5A320J0 RAM51VV0> ATA-7 device ada1: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada1: 308921MB (632672208 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad1 GEOM_MIRROR: Device mirror/gswap launched (2/2). Trying to mount root from nfs: []... dc0: link state changed to UP Maybe I messed something up in the kernel I was building. Let me drop = back to a GENERIC from the same stable/9 and see if that will boot. I just have to figure = out how to get it onto the disks. :-) - Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A97038B3-836A-466B-BD96-95C07548E973>