Date: Wed, 03 Nov 2004 16:12:29 -0500 From: "Justin R. Smith" <jsmith@drexel.edu> To: freebsd-current@freebsd.org Subject: USB devices not being created Message-ID: <1099516348.787.4.camel@vorpal.math.drexel.edu>
next in thread | raw e-mail | index | archive | help
FreeBSD vorpal.math.drexel.edu 5.3-STABLE FreeBSD 5.3-STABLE #0: Wed
Nov 3 15:55:27 EST 2004
jsmith@vorpal.math.drexel.edu:/usr/obj/usr/src/sys/MYKERNEL i386
I'm running this version of FreeBSD on two machines. One is an IBM
workstation with a hyperthreading CPU (2 processors).
When I plug a mass storage device into the USB port of this machine (but
not the uniprocessor machine), no USB device is created. dmesg produces:
------------------------------------------------------------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Wed Nov 3 15:55:27 EST 2004
jsmith@vorpal.math.drexel.edu:/usr/obj/usr/src/sys/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073152000 (1023 MB)
avail memory = 1040527360 (992 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USB1._PRW] (Node 0xc2269900), AE_AML_NO_RETURN_VALUE
ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.USB1._PRW] (Node 0xc2269900), AE_AML_NO_RETURN_VALUE
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USB2._PRW] (Node 0xc22cfae0), AE_AML_NO_RETURN_VALUE
ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.USB2._PRW] (Node 0xc22cfae0), AE_AML_NO_RETURN_VALUE
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USB3._PRW] (Node 0xc22cf9c0), AE_AML_NO_RETURN_VALUE
ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.USB3._PRW] (Node 0xc22cf9c0), AE_AML_NO_RETURN_VALUE
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USB4._PRW] (Node 0xc22cf8a0), AE_AML_NO_RETURN_VALUE
ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.USB4._PRW] (Node 0xc22cf8a0), AE_AML_NO_RETURN_VALUE
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USBE._PRW] (Node 0xc22cf800), AE_AML_NO_RETURN_VALUE
ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.USBE._PRW] (Node 0xc22cf800), AE_AML_NO_RETURN_VALUE
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> port 0x530-0x537 on acpi0
cpu1: <ACPI CPU> port 0x530-0x537 on acpi0
cpu1: Failed to attach throttling P_CNT
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_tz0: _CRT value is absurd, ignored (6280.3C)
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xc4000000-0xc7ffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1800-0x181f
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ukbd0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
kbd1 at ukbd0
uhid0: Silitek IBM USB Keyboard, rev 1.10/1.00, addr 2, iclass 3/1
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1820-0x183f
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1840-0x185f
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1860-0x187f
irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0x3000-0x303f mem 0xc0200000-0xc021ffff irq 16 at device 11.0 on pci3
em0: Ethernet address: 00:0d:60:24:35:72
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1880-0x188f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem
0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 17 at device 31.5 on
pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq
3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USB1._PRW] (Node 0xc2269900), AE_AML_NO_RETURN_VALUE
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USB2._PRW] (Node 0xc22cfae0), AE_AML_NO_RETURN_VALUE
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USB3._PRW] (Node 0xc22cf9c0), AE_AML_NO_RETURN_VALUE
ACPI-1303: *** Error: Method execution failed
[\\_SB_.PCI0.USB4._PRW] (Node 0xc22cf8a0), AE_AML_NO_RETURN_VALUE
orm0: <ISA Option ROMs> at iomem
0xe0000-0xeffff,0xce000-0xcefff,0xcd000-0xcdfff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
em0: Link is up 100 Mbps Full Duplex
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 76324MB <Maxtor 6Y080L0/YAR41BW0> [155072/16/63] at ata0-master
UDMA100
acd0: CDRW <HL-DT-ST RW/DVD GCC-4481B/1.03> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4481B 1.03> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a
ipfw2 initialized, divert disabled, rule-based forwarding disabled,
default to deny, logging disabled
em0: Link is up 100 Mbps Full Duplex
------------------------------------------------------------------
It's as if the system is unaware I inserted the Kanguru drive.
The uniprocessor machine has no problem creating the device (with
comments in the dmesg output).
Any suggestions?
--
Time blows wildly against my door | Justin R. Smith
Stirring discarded sorrows | Mathematics Department
Like dead leaves of summers past | Drexel University
Shadows of what went before | Philadelphia, PA 19104
Making way for new tomorrows |
New hopes, new fears, | Office: (215) 895-1847
and new ways that last | URL: vorpal.math.drexel.edu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1099516348.787.4.camel>