Date: Mon, 22 Aug 2011 21:20:06 GMT From: dfilter@FreeBSD.ORG (dfilter service) To: freebsd-doc@FreeBSD.org Subject: Re: docs/159898: commit references a PR Message-ID: <201108222120.p7MLK6vG063421@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR docs/159898; it has been noted by GNATS. From: dfilter@FreeBSD.ORG (dfilter service) To: bug-followup@FreeBSD.org Cc: Subject: Re: docs/159898: commit references a PR Date: Mon, 22 Aug 2011 21:11:05 +0000 (UTC) Author: hselasky Date: Mon Aug 22 21:10:50 2011 New Revision: 225091 URL: http://svn.freebsd.org/changeset/base/225091 Log: Spelling corrections for LibUSB manual page (2/2). MFC after: 1 week Approved by: re (kib) PR: docs/159898 Modified: head/lib/libusb/libusb.3 Modified: head/lib/libusb/libusb.3 ============================================================================== --- head/lib/libusb/libusb.3 Mon Aug 22 21:05:39 2011 (r225090) +++ head/lib/libusb/libusb.3 Mon Aug 22 21:10:50 2011 (r225091) @@ -33,7 +33,8 @@ .Nm libusb .Nd "USB access library" .Sh LIBRARY -USB access library (libusb -lusb) +USB access library +.Pq libusb, -lusb .Sh SYNOPSIS .In libusb.h .Sh DESCRIPTION @@ -46,8 +47,8 @@ The current implementation supports v1.0 .Ft int .Fn libusb_init libusb_context **ctx This function initialises libusb. -Must be called at the beginning -of the program. +It must be called at the beginning +of the program, before other libusb routines are used. This function returns 0 on success or LIBUSB_ERROR on failure. .Pp @@ -55,35 +56,39 @@ failure. .Fn libusb_exit "libusb_context *ctx" Deinitialise libusb. Must be called at the end of the application. +Other libusb routines may not be called after this function. .Pp .Ft const char * .Fn libusb_strerror "int code" -Get ASCII representation of the error given by the +Get the ASCII representation of the error given by the .Fa code argument. .Pp .Ft void .Fn libusb_set_debug "libusb_context *ctx" "int level" -Set debug to the -.Fa level -level. +Set the debug level to +.Fa level . .Pp .Ft ssize_t .Fn libusb_get_device_list "libusb_context *ctx" "libusb_device ***list" -Fill into +Populate .Fa list -the list of usb device available. -All the device created by this -function must be unref and free when you are done with them. +with the list of usb devices available, adding a reference to each +device in the list. +All the list entries created by this +function must have their reference counter +decremented when you are done with them, +and the list itself must be freed. This -function returns the number of devices in list or a LIBUSB_ERROR code. +function returns the number of devices in the list or a LIBUSB_ERROR code. .Pp .Ft void .Fn libusb_free_device_list "libusb_device **list" "int unref_devices" Free the list of devices discovered by libusb_get_device_list. If .Fa unref_device -is set to 1 all devices are unref one time. +is set to 1 all devices in the list have their reference +counter decremented once. .Pp .Ft uint8_t .Fn libusb_get_bus_number "libusb_device *dev" @@ -120,13 +125,13 @@ Decrement the reference counter of the d .Fn libusb_open "libusb_device *dev" "libusb_device_handle **devh" Open a device and obtain a device_handle. Returns 0 on success, -LIBUSB_ERROR_NO_MEM on memory allocation problem, LIBUSB_ERROR_ACCESS -on permission problem, LIBUSB_ERROR_NO_DEVICE if the device has been -disconnected and a LIBUSB_ERROR code on error. +LIBUSB_ERROR_NO_MEM on memory allocation problems, LIBUSB_ERROR_ACCESS +on permissions problems, LIBUSB_ERROR_NO_DEVICE if the device has been +disconnected and a LIBUSB_ERROR code on other errors. .Pp .Ft libusb_device_handle * .Fn libusb_open_device_with_vid_pid "libusb_context *ctx" "uint16_t vid" "uint16_t pid" -Convenience function to open a device with is +A convenience function to open a device by vendor and product IDs .Fa vid and .Fa pid. @@ -150,7 +155,7 @@ and a LIBUSB_ERROR code on error. .Pp .Ft int .Fn libusb_set_configuration "libusb_device_handle *devh" "int config" -Set the active configuration +Set the active configuration to .Fa config for the device contained by .Fa devh. @@ -164,16 +169,16 @@ LIBUSB_ERROR code on failure. Claim an interface in a given libusb_handle .Fa devh. This is a non-blocking function. -It returns 0 success, LIBUSB_ERROR_NOT_FOUND +It returns 0 on success, LIBUSB_ERROR_NOT_FOUND if the requested interface does not exist, LIBUSB_ERROR_BUSY if a program or driver has claimed the interface, LIBUSB_ERROR_NO_DEVICE if the device has been disconnected and a LIBUSB_ERROR code on failure. .Pp .Ft int .Fn libusb_release_interface "libusb_device_handle *devh" "int interface_number" -This function release an interface. -All the claimed interface must be released -before closing a device. +This function releases an interface. +All the claimed interfaces on a device must be released +before closing the device. Returns 0 on success, LIBUSB_ERROR_NOT_FOUND if the interface was not claimed, LIBUSB_ERROR_NO_DEVICE if the device has been disconnected and LIBUSB_ERROR on failure. @@ -184,7 +189,7 @@ Activate an alternate setting for an int Returns 0 on success, LIBUSB_ERROR_NOT_FOUND if the interface was not claimed or the requested setting does not exist, LIBUSB_ERROR_NO_DEVICE if the device has been -disconnected and LIBUSB_ERROR code on failure. +disconnected and a LIBUSB_ERROR code on failure. .Pp .Ft int .Fn libusb_clear_halt "libusb_device_handle *devh" "unsigned char endpoint" @@ -202,31 +207,30 @@ been disconnected and a LIBUSB_ERROR cod .Pp .Ft int .Fn libusb_check_connected "libusb_device_handle *devh" -Test if USB device is still connected. +Test if the USB device is still connected. Returns 0 on success, -LIBUSB_ERROR_NO_DEVICE if has been disconnected and a LIBUSB_ERROR +LIBUSB_ERROR_NO_DEVICE if it has been disconnected and a LIBUSB_ERROR code on failure. .Pp .Ft int .Fn libusb_kernel_driver_active "libusb_device_handle *devh" "int interface" Determine if a driver is active on a interface. Returns 0 if no kernel driver -is active, returns 1 if a kernel driver is active, -returns LIBUSB_ERROR_NO_DEVICE -if the device has been disconnected and returns a LIBUSB_ERROR code on failure. +is active, 1 if a kernel driver is active, LIBUSB_ERROR_NO_DEVICE +if the device has been disconnected and a LIBUSB_ERROR code on failure. .Pp .Ft int .Fn libusb_get_driver "libusb_device_handle *devh" "int interface" "char *name" "int namelen" or .Ft int .Fn libusb_get_driver_np "libusb_device_handle *devh" "int interface" "char *name" "int namelen" -Gets the name of the driver attached to the given +Copy the name of the driver attached to the given .Fa device and .Fa interface -into the buffer given by +into the buffer .Fa name -and +of length .Fa namelen . Returns 0 on success, LIBUSB_ERROR_NOT_FOUND if no kernel driver is attached to the given interface and LIBUSB_ERROR_INVALID_PARAM if the interface does @@ -242,7 +246,7 @@ or .Ft int .Fn libusb_detach_kernel_driver_np "libusb_device_handle *devh" "int interface" Detach a kernel driver from an interface. -This is needed to claim an interface required by a kernel driver. +This is needed to claim an interface already claimed by a kernel driver. Returns 0 on success, LIBUSB_ERROR_NOT_FOUND if no kernel driver was active, LIBUSB_ERROR_INVALID_PARAM if the interface does not exist, LIBUSB_ERROR_NO_DEVICE if the device has been disconnected @@ -251,11 +255,11 @@ This function is non-portable. .Pp .Ft int .Fn libusb_attach_kernel_driver "libusb_device_handle *devh" "int interface" -Re-attach an interface kernel driver previously detached. +Re-attach an interface kernel driver that was previously detached. Returns 0 on success, LIBUSB_ERROR_INVALID_PARAM if the interface does not exist, LIBUSB_ERROR_NO_DEVICE -if the device has been disconnect, LIBUSB_ERROR_BUSY if the driver cannot be +if the device has been disconnected, LIBUSB_ERROR_BUSY if the driver cannot be attached because the interface is claimed by a program or driver and a LIBUSB_ERROR code on failure. .Pp @@ -273,24 +277,25 @@ failure. .Fn libsub_get_active_config_descriptor "libusb_device *dev" "struct libusb_config_descriptor **config" Get the USB configuration descriptor for the active configuration. Returns 0 on -success, returns LIBUSB_ERROR_NOT_FOUND if the device is in unconfigured state -and returns another LIBUSB_ERROR code on error. +success, LIBUSB_ERROR_NOT_FOUND if the device is in +an unconfigured state +and a LIBUSB_ERROR code on error. .Pp .Ft int .Fn libusb_get_config_descriptor "libusb_device *dev" "uint8_t config_index" "libusb_config_descriptor **config" -Get USB configuration descriptor based on its index +Get a USB configuration descriptor based on its index .Fa idx. Returns 0 on success, LIBUSB_ERROR_NOT_FOUND if the configuration does not exist -and returns another LIBUSB_ERROR code on error. +and a LIBUSB_ERROR code on error. .Pp .Ft int .Fn libusb_get_config_descriptor_by_value "libusb_device *dev" "uint8 bConfigurationValue" "libusb_config_descriptor **config" Get a USB configuration descriptor with a specific bConfigurationValue. This is -a non-blocking function which does not send request through the device. +a non-blocking function which does not send a request through the device. Returns 0 on success, LIBUSB_ERROR_NOT_FOUND if the configuration -does not exist and another +does not exist and a LIBUSB_ERROR code on failure. .Pp .Ft void @@ -299,17 +304,17 @@ Free a configuration descriptor. .Pp .Ft int .Fn libusb_get_string_descriptor_ascii "libusb_device_handle *devh" "uint8_t desc_idx" "unsigned char *data" "int length" -Retrieve a string descriptor in C style ascii. -Returns a positive number of bytes in the resulting ASCII string +Retrieve a string descriptor in C style ASCII. +Returns the positive number of bytes in the resulting ASCII string on success and a LIBUSB_ERROR code on failure. .Pp .Sh USB ASYNCHRONOUS I/O .Pp .Ft struct libusb_transfer * .Fn libusb_alloc_transfer "int iso_packets" -Allocate a transfer with -.Fa iso_packets -numbers of isochronous packet descriptors. +Allocate a transfer with the number of isochronous packet descriptors +specified by +.Fa iso_packets . Returns NULL on error. .Pp .Ft void @@ -320,13 +325,13 @@ Free a transfer. .Fn libusb_submit_transfer "struct libusb_transfer *tr" This function will submit a transfer and returns immediately. Returns 0 on success, LIBUSB_ERROR_NO_DEVICE if -the device has been disconnected and +the device has been disconnected and a LIBUSB_ERROR code on other failure. .Pp .Ft int .Fn libusb_cancel_transfer "struct libusb_transfer *tr" -This function asynchronously cancel a transfer. -Returns 0 on success and LIBUSB_ERROR code on failure. +This function asynchronously cancels a transfer. +Returns 0 on success and a LIBUSB_ERROR code on failure. .Pp .Sh USB SYNCHRONOUS I/O .Pp @@ -334,14 +339,14 @@ Returns 0 on success and LIBUSB_ERROR co .Fn libusb_control_transfer "libusb_device_handle *devh" "uint8_t bmRequestType" "uint8_t bRequest" "uint16_t wValue" "uint16_t wIndex" "unsigned char *data" "uint16_t wLength" "unsigned int timeout" Perform a USB control transfer. Returns the actual number of bytes -transferred on success in the range from and including zero until and +transferred on success, in the range from and including zero up to and including .Fa wLength . -On error a libusb error code is returned, for example -LIBUSB_ERROR_TIMEOUT if the transfer timeout, LIBUSB_ERROR_PIPE if the +On error a LIBUSB_ERROR code is returned, for example +LIBUSB_ERROR_TIMEOUT if the transfer timed out, LIBUSB_ERROR_PIPE if the control request was not supported, LIBUSB_ERROR_NO_DEVICE if the -device has been disconnected or another LIBUSB_ERROR code on other failures. -The libusb error codes are always negative. +device has been disconnected and another LIBUSB_ERROR code on other failures. +The LIBUSB_ERROR codes are all negative. .Pp .Ft int .Fn libusb_bulk_transfer "struct libusb_device_handle *devh" "unsigned char endpoint" "unsigned char *data" "int length" "int *transferred" "unsigned int timeout" @@ -349,10 +354,10 @@ Perform an USB bulk transfer. A timeout value of zero means no timeout. The timeout value is given in milliseconds. Returns 0 on success, LIBUSB_ERROR_TIMEOUT -if the transfer timeout, LIBUSB_ERROR_PIPE if the control request was not +if the transfer timed out, LIBUSB_ERROR_PIPE if the control request was not supported, LIBUSB_ERROR_OVERFLOW if the device offered more data, LIBUSB_ERROR_NO_DEVICE if the device has been disconnected and -LIBUSB_ERROR code on other failure. +a LIBUSB_ERROR code on other failure. .Pp .Ft int .Fn libusb_interrupt_transfer "struct libusb_device_handle *devh" "unsigned char endpoint" "unsigned char *data" "int length" "int *transferred" "unsigned int timeout" @@ -360,10 +365,10 @@ Perform an USB Interrupt transfer. A timeout value of zero means no timeout. The timeout value is given in milliseconds. Returns 0 on success, LIBUSB_ERROR_TIMEOUT -if the transfer timeout, LIBUSB_ERROR_PIPE if the control request was not +if the transfer timed out, LIBUSB_ERROR_PIPE if the control request was not supported, LIBUSB_ERROR_OVERFLOW if the device offered more data, LIBUSB_ERROR_NO_DEVICE if the device has been disconnected and -LIBUSB_ERROR code on other failure. +a LIBUSB_ERROR code on other failure. .Pp .Sh USB EVENTS .Pp @@ -381,7 +386,8 @@ This function is blocking. .Fn libusb_unlock_events "libusb_context *ctx" Release the event handling lock. This will wake up any thread blocked -on libusb_wait_for_event(). +on +.B libusb_wait_for_event() . .Pp .Ft int .Fn libusb_event_handling_ok "libusb_context *ctx" @@ -394,13 +400,13 @@ the events lock. .Ft int .Fn libusb_event_handler_active "libusb_context *ctx" Determine if an active thread is handling events. -Returns 1 if yes and 0 if there +Returns 1 if there is a thread handling events and 0 if there are no threads currently handling events. .Pp .Ft void .Fn libusb_lock_event_waiters "libusb_context *ctx" Acquire the event_waiters lock. -This lock is designed to be obtained under the +This lock is designed to be obtained in the situation where you want to be aware when events are completed, but some other thread is event handling so calling libusb_handle_events() is not allowed. .Pp @@ -417,7 +423,7 @@ This will block until the timeout expires or a transfer completes or a thread releases the event handling lock through libusb_unlock_events(). Returns 0 after a -transfer completes or another thread stops event handling, returns 1 if the +transfer completes or another thread stops event handling, and 1 if the timeout expired. .Pp .Ft int @@ -431,19 +437,19 @@ LIBUSB_ERROR code on failure. .Fn libusb_handle_events "libusb_context *ctx" Handle any pending events in blocking mode with a sensible timeout. Returns 0 -on success, returns a LIBUSB_ERROR code on failure. +on success and a LIBUSB_ERROR code on failure. .Pp .Ft int .Fn libusb_handle_events_locked "libusb_context *ctx" "struct timeval *tv" Handle any pending events by polling file desciptors, without checking if -another threads are already doing so. +another thread is already doing so. Must be called with the event lock held. .Pp .Ft int .Fn libusb_get_next_timeout "libusb_context *ctx" "struct timeval *tv" Determine the next internal timeout that libusb needs to handle. Returns 0 -if there are no pending timeouts, 1 if a timeout was returned, or LIBUSB_ERROR +if there are no pending timeouts, 1 if a timeout was returned, or a LIBUSB_ERROR code on failure. .Pp .Ft void _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201108222120.p7MLK6vG063421>