Date: Sun, 26 Jun 2016 21:07:01 -0300 From: =?UTF-8?B?T3RhY8OtbGlv?= <otacilio.neto@bsd.com.br> To: lausts@acm.org Cc: freebsd-arm@freebsd.org Subject: Re: 'urtwn' & 'urtwnfw' Devices Unknown in r302145 Message-ID: <9d6e3b33-18d9-964d-88e8-69c61be447aa@bsd.com.br> In-Reply-To: <20160626235125.GA87206@mail.laus.org> References: <20160623220014.GA73746@mail.laus.org> <E1bGNqB-0096kk-EF@smtp.hs-karlsruhe.de> <576FFBC8.21954.BF018@lausts.acm.org> <eaca152f-230c-a323-34cf-94e8e23bad86@bsd.com.br> <20160626235125.GA87206@mail.laus.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Em 26/06/2016 20:51, Thomas Laus escreveu: > Otaclio [otacilio.neto@bsd.com.br] wrote: >> I don't understand the problem that you are facing. I was running the ALPHA4 >> and now ALPHA5 and I do not have problems to detect my urtwn devices. All >> need is plug it into my notebook. I have tested using amd64 and beaglebone >> black and both detects the device and it works. >> >> ugen0.2: <vendor 0x0bda> at usbus0 >> urtwn0: <vendor 0x0bda product 0x8178, class 0/0, rev 2.00/2.00, addr 1> on >> usbus0 >> urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R >> urtwn0: enabling 11n >> [ota@nostromo /usr/home/ota]$ uname -a >> FreeBSD nostromo 11.0-ALPHA5 FreeBSD 11.0-ALPHA5 #1 r302205: Sun Jun 26 >> 05:33:10 BRT 2016 ota@squitch:/usr/obj/usr/src/sys/GENERIC-NODEBUG amd64 >> >> _______________________________________________ >> > Otaclio: > > I don't know the reason either and that is why I am asking for > suggestions on how to identify and resolve my issues. I captured some > console messages that may provide additional insight. > > With Belkin USB Device > > Jun 26 19:09:02 fbsd11 kernel: ugen0.2: <vendor 0x0bda> at usbus0 > Jun 26 19:09:02 fbsd11 kernel: urtwn0: <vendor 0x0bda product 0x8191, class 0/0, rev 2.00/2.00, addr 1> on usbus0 > Jun 26 19:09:02 fbsd11 kernel: urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > Jun 26 19:09:02 fbsd11 kernel: urtwn0: enabling 11n > > With Edimax N150N Device > > Jun 26 19:10:01 fbsd11 kernel: ugen0.2: <vendor 0x7392> at usbus0 > Jun 26 19:10:01 fbsd11 kernel: urtwn0: <vendor 0x7392 product 0x7811, class 0/0, rev 2.00/2.00, addr 2> on usbus0 > Jun 26 19:10:01 fbsd11 kernel: urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R > > Ifconfig messages after either urtwn insertion. > > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE> > ether 30:5a:3a:07:fa:54 > inet 192.168.1.105 netmask 0xffffff00 broadcast 192.168.1.255 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > inet 127.0.0.1 netmask 0xff000000 > groups: lo > > FBSD11 >ifconfig urtwn0 up > ifconfig: interface urtwn0 does not exist > > FBSD11 >uname -a > FreeBSD fbsd11 11.0-ALPHA5 FreeBSD 11.0-ALPHA5 #0 r302200M: Sun Jun 26 10:54:44 EDT 2016 lausts@fbsd11:/usr/obj/usr/src/sys/GENERIC-NODEBUG amd64 > > It looks like the device gets identified, but the kernel module just > doesn't like something with either Realtek urtwn network hardware. I > have a spare hard disk and will load a fresh snapshot of FreeBSD 11.0 > tomorrow and I'll report to the list if anything is different. I > receive the same results with either my 'amd64' and BeagleBone Black > computers. Both of my urtwn network interfaces are detected and > usable on another computer that is running FreeBSD 10.3 Release-P5. > > Tom > > Are you running a "normal" ALPHA5 version or did you some changes to it? []s -Otacilio
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9d6e3b33-18d9-964d-88e8-69c61be447aa>