Date: Fri, 13 Jan 2006 21:11:43 -0600 From: Jeff Cross <jeff.cross@averageadmins.com> To: jeff.cross@averageadmins.com Cc: freebsd-mobile@freebsd.org Subject: Re: FreeBSD 6.0 and Sony Ericsson GC83 Message-ID: <43C86BEF.8070209@averageadmins.com> In-Reply-To: <43C83894.7000405@averageadmins.com> References: <43C83894.7000405@averageadmins.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Jeff Cross wrote: > I have recently started using FreeBSD (5.4 briefly then on to 6.0) and > love it! For some reason I enjoy messing around with FreeBSD a lot > more than I did Linux. My FreeBSD install is currently on a Gateway > 7326GZ (Intel) Laptop. > So far, everything is working as it should except I get no volume when > playing audio files and I really don't know where to start with my > recently acquired Sony Ericsson GC83 cellular wireless card. Because > I can do without audio, for now, I would like to see if anyone can > assist me in getting my GC83 card working. > > It seems that the system recognizes the card and sets it up as > /dev/pccard0.cis. > > [** dmesg output **] > sio4: <Sony Ericsson GC83 PC Card> at port 0x3e8-0x3ef irq 17 function > 0 config 32 on pccard0 > sio4: type 16550A > sio4: unable to activate interrupt in fast mode - using normal mode > > I don't know how to get rid of the "using normal mode" above. I have > done plenty of browsing and can't seem to find anyone with a similar > issue to mine. > > I have also found a tutorial for using this exact card on Linux > located here: > > http://advantedgecomputing.com/opensource/gc83linux.html > > I followed the tutorial, modified the /etc/ppp/peers/cingular file to > use the device /dev/pccard0.cis and had to comment out the user, > password, and usepeerdns lines because pppd complained that those were > not valid options. I also corrected the path to the chat program > (/usr/bin/chat instead of /usr/sbin/chat). The program fires off and > immediately returns the following errors in /var/log/messages: > > [** /var/log/messages **] > Jan 13 16:55:34 xtop pppd[849]: pppd 2.3.5 started by cross, uid 0 > Jan 13 16:55:34 xtop pppd[849]: Couldn't reset non-blocking mode on > device: Inappropriate ioctl for device > Jan 13 16:55:34 xtop pppd[849]: tcgetattr: Inappropriate ioctl for device > > I know this will be a somewhat difficult issue for someone to > troubleshoot since this pccard is not that common. However, if I am > messing up somewhere with the ppp peers configuration or chat > commands, someone out there may be able to assist me. > > I do not know if this is a hardware, software, or configuration > issue. Any assistance is greatly appreciated. I am attaching my > dmesg output since that seems to be a pretty common request to trouble > shoot any issue. If any other information is necessary to assist you > in assisting me, please let me know and I will get it to you as soon > as possible. > > Thanks in advance. > > Jeff Cross > >------------------------------------------------------------------------ > >Copyright (c) 1992-2005 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 6.0-SECURITY #0: Mon Dec 19 23:46:33 UTC 2005 > root@builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz (3056.50-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x459d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,<b14>> > Hyperthreading: 2 logical CPUs >real memory = 771555328 (735 MB) >avail memory = 745721856 (711 MB) >ACPI APIC Table: <A M I OEMAPIC > >ioapic0 <Version 2.0> irqs 0-23 on motherboard >wlan: mac acl policy registered >ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) >npx0: [FAST] >npx0: <math processor> on motherboard >npx0: INT 16 interface >acpi0: <A M I OEMRSDT> on motherboard >acpi0: Power Button (fixed) >acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 >pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 >pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0 >pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0 >pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 >pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 >pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 >pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 >pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0 >Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >cpu0: <ACPI CPU> on acpi0 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pci0: <base peripheral> at device 0.1 (no driver attached) >pci0: <base peripheral> at device 0.3 (no driver attached) >agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xeff0-0xeff7 mem 0xd8000000-0xdfffffff,0xe0380000-0xe03fffff irq 16 at device 2.0 on pci0 >agp0: detected 32636k stolen memory >agp0: aperture size is 128M >pci0: <display> at device 2.1 (no driver attached) >uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xef20-0xef3f irq 16 at device 29.0 on pci0 >uhci0: [GIANT-LOCKED] >usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 >usb0: USB revision 1.0 >uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 2 ports with 2 removable, self powered >uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xef40-0xef5f irq 19 at device 29.1 on pci0 >uhci1: [GIANT-LOCKED] >usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 >usb1: USB revision 1.0 >uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub1: 2 ports with 2 removable, self powered >uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xef80-0xef9f irq 18 at device 29.2 on pci0 >uhci2: [GIANT-LOCKED] >usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 >usb2: USB revision 1.0 >uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub2: 2 ports with 2 removable, self powered >ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xe02ffc00-0xe02fffff irq 23 at device 29.7 on pci0 >ehci0: [GIANT-LOCKED] >usb3: EHCI version 1.0 >usb3: companion controllers, 2 ports each: usb0 usb1 usb2 >usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0 >usb3: USB revision 2.0 >uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >uhub3: 6 ports with 6 removable, self powered >pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe00ff800-0xe00fffff,0xe00f8000-0xe00fbfff irq 16 at device 4.0 on pci1 >fwohci0: OHCI version 1.10 (ROM=1) >fwohci0: No. of Isochronous channels is 4. >fwohci0: EUI64 00:03:25:21:37:01:51:c7 >fwohci0: Phy 1394a available S400, 2 ports. >fwohci0: Link S400, max_rec 2048 bytes. >firewire0: <IEEE1394(FireWire) bus> on fwohci0 >fwe0: <Ethernet over FireWire> on firewire0 >if_fwe0: Fake Ethernet address: 02:03:25:01:51:c7 >fwe0: Ethernet address: 02:03:25:01:51:c7 >fwe0: if_start running deferred for Giant >sbp0: <SBP-2/SCSI over FireWire> on firewire0 >fwohci0: Initiate bus reset >fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode >firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) >firewire0: bus manager 0 (me) >cbb0: <TI1510 PCI-CardBus Bridge> at device 5.0 on pci1 >cardbus0: <CardBus bus> on cbb0 >pccard0: <16-bit PCCard bus> on cbb0 >bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xe00fc000-0xe00fdfff irq 19 at device 6.0 on pci1 >miibus0: <MII bus> on bfe0 >bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 >bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >bfe0: Ethernet address: 00:03:25:21:d2:9e >ndis0: <Broadcom 802.11g Network Adapter> mem 0xe00f6000-0xe00f7fff irq 18 at device 9.0 on pci1 >ndis0: NDIS API version: 5.1 >ndis0: Ethernet address: 00:90:4b:cc:1c:90 >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 >ata0: <ATA channel 0> on atapci0 >ata1: <ATA channel 1> on atapci0 >pcm0: <Intel ICH4 (82801DB)> port 0xe400-0xe4ff,0xee80-0xeebf mem 0xe02ff800-0xe02ff9ff,0xe02ff400-0xe02ff4ff irq 17 at device 31.5 on pci0 >pcm0: [GIANT-LOCKED] >pcm0: <Unknown AC97 Codec (id = 0x43585430)> >pci0: <simple comms, generic modem> at device 31.6 (no driver attached) >acpi_acad0: <AC Adapter> on acpi0 >battery0: <ACPI Control Method Battery> on acpi0 >acpi_lid0: <Control Method Lid Switch> on acpi0 >acpi_button0: <Sleep Button> on acpi0 >acpi_button1: <Power Button> on acpi0 >acpi_tz0: <Thermal Zone> on acpi0 >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >psm0: <PS/2 Mouse> irq 12 on atkbdc0 >psm0: [GIANT-LOCKED] >psm0: model IntelliMouse, device ID 3 >pmtimer0 on isa0 >ppc0: parallel port not found. >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0: port may not be enabled >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 8250 or not responding >sio1: configured irq 3 not in bitmap of probed irqs 0 >sio1: port may not be enabled >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >Timecounter "TSC" frequency 3056497485 Hz quality 800 >Timecounters tick every 1.000 msec >sio4: <Sony Ericsson GC83 PC Card> at port 0x3e8-0x3ef irq 17 function 0 config 32 on pccard0 >sio4: type 16550A >sio4: unable to activate interrupt in fast mode - using normal mode >ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master UDMA100 >acd0: FAILURE - MODE_SENSE_BIG timed out >acd0: DVDR <HL-DT-ST DVD-RW GWA-4080N/0G03> at ata1-master UDMA33 >Trying to mount root from ufs:/dev/ad0s4a >All threads purged from cuad4 >All threads purged from ttyd4 >sio4: detached >sio4: <Sony Ericsson GC83 PC Card> at port 0x3e8-0x3ef irq 17 function 0 config 32 on pccard0 >sio4: type 16550A >sio4: unable to activate interrupt in fast mode - using normal mode >bfe0: link state changed to UP >All threads purged from cuad4 >All threads purged from ttyd4 >sio4: detached >sio4: <Sony Ericsson GC83 PC Card> at port 0x3e8-0x3ef irq 17 function 0 config 32 on pccard0 >sio4: type 16550A >sio4: unable to activate interrupt in fast mode - using normal mode >Waiting (max 60 seconds) for system process `vnlru' to stop...done >Waiting (max 60 seconds) for system process `bufdaemon' to stop...done >Waiting (max 60 seconds) for system process `syncer' to stop... >Syncing disks, vnodes remaining...2 1 1 1 0 0 done >All buffers synced. >Copyright (c) 1992-2005 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 6.0-SECURITY #0: Mon Dec 19 23:46:33 UTC 2005 > root@builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC >Timecounter "i8254" frequency 1193182 Hz quality 0 >CPU: Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz (3056.50-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x459d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,<b14>> > Hyperthreading: 2 logical CPUs >real memory = 771555328 (735 MB) >avail memory = 745721856 (711 MB) >ACPI APIC Table: <A M I OEMAPIC > >ioapic0 <Version 2.0> irqs 0-23 on motherboard >wlan: mac acl policy registered >ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) >npx0: [FAST] >npx0: <math processor> on motherboard >npx0: INT 16 interface >acpi0: <A M I OEMRSDT> on motherboard >acpi0: Power Button (fixed) >acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 >pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 >pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0 >pci_link2: <ACPI PCI Link LNKC> irq 9 on acpi0 >pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 >pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 >pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 >pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 >pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0 >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >cpu0: <ACPI CPU> on acpi0 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pci0: <base peripheral> at device 0.1 (no driver attached) >pci0: <base peripheral> at device 0.3 (no driver attached) >agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> port 0xeff0-0xeff7 mem 0xd8000000-0xdfffffff,0xe0380000-0xe03fffff irq 16 at device 2.0 on pci0 >agp0: detected 32636k stolen memory >agp0: aperture size is 128M >pci0: <display> at device 2.1 (no driver attached) >uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xef20-0xef3f irq 16 at device 29.0 on pci0 >uhci0: [GIANT-LOCKED] >usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 >usb0: USB revision 1.0 >uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub0: 2 ports with 2 removable, self powered >uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xef40-0xef5f irq 19 at device 29.1 on pci0 >uhci1: [GIANT-LOCKED] >usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 >usb1: USB revision 1.0 >uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub1: 2 ports with 2 removable, self powered >uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xef80-0xef9f irq 18 at device 29.2 on pci0 >uhci2: [GIANT-LOCKED] >usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 >usb2: USB revision 1.0 >uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >uhub2: 2 ports with 2 removable, self powered >ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xe02ffc00-0xe02fffff irq 23 at device 29.7 on pci0 >ehci0: [GIANT-LOCKED] >usb3: EHCI version 1.0 >usb3: companion controllers, 2 ports each: usb0 usb1 usb2 >usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0 >usb3: USB revision 2.0 >uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >uhub3: 6 ports with 6 removable, self powered >pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe00ff800-0xe00fffff,0xe00f8000-0xe00fbfff irq 16 at device 4.0 on pci1 >fwohci0: OHCI version 1.10 (ROM=1) >fwohci0: No. of Isochronous channels is 4. >fwohci0: EUI64 00:03:25:21:37:01:51:c7 >fwohci0: Phy 1394a available S400, 2 ports. >fwohci0: Link S400, max_rec 2048 bytes. >firewire0: <IEEE1394(FireWire) bus> on fwohci0 >fwe0: <Ethernet over FireWire> on firewire0 >if_fwe0: Fake Ethernet address: 02:03:25:01:51:c7 >fwe0: Ethernet address: 02:03:25:01:51:c7 >fwe0: if_start running deferred for Giant >sbp0: <SBP-2/SCSI over FireWire> on firewire0 >fwohci0: Initiate bus reset >fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode >firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) >firewire0: bus manager 0 (me) >cbb0: <TI1510 PCI-CardBus Bridge> at device 5.0 on pci1 >cardbus0: <CardBus bus> on cbb0 >pccard0: <16-bit PCCard bus> on cbb0 >bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xe00fc000-0xe00fdfff irq 19 at device 6.0 on pci1 >miibus0: <MII bus> on bfe0 >bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 >bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >bfe0: Ethernet address: 00:03:25:21:d2:9e >ndis0: <Broadcom 802.11g Network Adapter> mem 0xe00f6000-0xe00f7fff irq 18 at device 9.0 on pci1 >ndis0: NDIS API version: 5.1 >ndis0: Ethernet address: 00:90:4b:cc:1c:90 >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 >ata0: <ATA channel 0> on atapci0 >ata1: <ATA channel 1> on atapci0 >pcm0: <Intel ICH4 (82801DB)> port 0xe400-0xe4ff,0xee80-0xeebf mem 0xe02ff800-0xe02ff9ff,0xe02ff400-0xe02ff4ff irq 17 at device 31.5 on pci0 >pcm0: [GIANT-LOCKED] >pcm0: <Unknown AC97 Codec (id = 0x43585430)> >pci0: <simple comms, generic modem> at device 31.6 (no driver attached) >acpi_acad0: <AC Adapter> on acpi0 >battery0: <ACPI Control Method Battery> on acpi0 >acpi_lid0: <Control Method Lid Switch> on acpi0 >acpi_button0: <Sleep Button> on acpi0 >acpi_button1: <Power Button> on acpi0 >acpi_tz0: <Thermal Zone> on acpi0 >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >psm0: <PS/2 Mouse> irq 12 on atkbdc0 >psm0: [GIANT-LOCKED] >psm0: model IntelliMouse, device ID 3 >pmtimer0 on isa0 >ppc0: parallel port not found. >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >sio0: configured irq 4 not in bitmap of probed irqs 0 >sio0: port may not be enabled >sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >sio0: type 8250 or not responding >sio1: configured irq 3 not in bitmap of probed irqs 0 >sio1: port may not be enabled >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >Timecounter "TSC" frequency 3056502131 Hz quality 800 >Timecounters tick every 1.000 msec >sio4: <Sony Ericsson GC83 PC Card> at port 0x3e8-0x3ef irq 17 function 0 config 32 on pccard0 >sio4: type 16550A >sio4: unable to activate interrupt in fast mode - using normal mode >ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master UDMA100 >acd0: FAILURE - MODE_SENSE_BIG timed out >acd0: DVDR <HL-DT-ST DVD-RW GWA-4080N/0G03> at ata1-master UDMA33 >Trying to mount root from ufs:/dev/ad0s4a >bfe0: link state changed to DOWN >bfe0: link state changed to UP > > >------------------------------------------------------------------------ > >_______________________________________________ >freebsd-mobile@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-mobile >To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" > I ejected the card from the card slot and saw two devices cuad4 and ttyd4. I then tried changing the device in the /etc/ppp/peers/cingular file to /dev/ttyd4 and running 'pppd call cingular' now makes a call but it hangs up immediately. I will post the output from /var/log/messages below. Jan 13 20:38:15 xtop sudo: cross : TTY=ttyp4 ; PWD=/usr/home/cross ; USER=root ; COMMAND=/sbin/ifconfig Jan 13 20:38:17 xtop pppd[632]: Modem hangup, connected for 1 minutes Jan 13 20:38:17 xtop pppd[632]: Connection terminated, connected for 1 minutes Jan 13 20:38:52 xtop pppd[632]: Connect: ppp0 <--> /dev/ttyd4 Jan 13 20:38:58 xtop pppd[632]: Modem hangup, connected for 1 minutes Jan 13 20:38:58 xtop pppd[632]: Connection terminated, connected for 1 minutes Jan 13 20:39:32 xtop pppd[632]: Connect: ppp0 <--> /dev/ttyd4 Jan 13 20:39:34 xtop pppd[632]: Modem hangup, connected for 1 minutes Jan 13 20:39:34 xtop pppd[632]: Connection terminated, connected for 1 minutes Jan 13 20:40:09 xtop pppd[632]: Connect: ppp0 <--> /dev/ttyd4 Jan 13 20:40:10 xtop pppd[632]: Modem hangup, connected for 1 minutes Jan 13 20:40:10 xtop pppd[632]: Connection terminated, connected for 1 minutes Jan 13 20:40:45 xtop pppd[632]: Connect: ppp0 <--> /dev/ttyd4 Jan 13 20:40:46 xtop pppd[632]: Modem hangup, connected for 1 minutes Jan 13 20:40:46 xtop pppd[632]: Connection terminated, connected for 1 minutes Jan 13 20:41:21 xtop pppd[632]: Connect: ppp0 <--> /dev/ttyd4 Jan 13 20:41:23 xtop pppd[632]: Modem hangup, connected for 1 minutes Jan 13 20:41:23 xtop pppd[632]: Connection terminated, connected for 1 minutes Jan 13 20:41:58 xtop pppd[632]: Connect: ppp0 <--> /dev/ttyd4 Jan 13 20:41:59 xtop pppd[632]: Modem hangup, connected for 1 minutes Jan 13 20:41:59 xtop pppd[632]: Connection terminated, connected for 1 minutes I tried changing the device to /dev/cuad4 as well and got the same results. Jan 13 20:44:13 xtop sudo: cross : TTY=ttyp2 ; PWD=/usr/home/cross ; USER=root ; COMMAND=/usr/sbin/pppd call cingular Jan 13 20:44:13 xtop pppd[705]: pppd 2.3.5 started by cross, uid 0 Jan 13 20:44:17 xtop pppd[705]: Connect: ppp0 <--> /dev/cuad4 Jan 13 20:44:18 xtop pppd[705]: Modem hangup, connected for 1 minutes Jan 13 20:44:18 xtop pppd[705]: Connection terminated, connected for 1 minutes Jan 13 20:44:52 xtop pppd[705]: Connect: ppp0 <--> /dev/cuad4 Jan 13 20:44:53 xtop pppd[705]: Modem hangup, connected for 1 minutes Jan 13 20:44:53 xtop pppd[705]: Connection terminated, connected for 1 minutes The /var/log/debug.log had the following output when trying to make the connection: Jan 13 21:08:26 xtop pppd[839]: sent [LCP ConfReq id=0xd <magic 0xb1e6b9c> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: rcvd [LCP ConfAck id=0xd <magic 0xb1e6b9c> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: rcvd [LCP ConfReq id=0xc2 <mru 1500> <asyncmap 0x0> <auth pap> <magic 0x1f5a8f> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: sent [LCP ConfRej id=0xc2 <auth pap>] Jan 13 21:08:26 xtop pppd[839]: rcvd [LCP ConfReq id=0xc2 <mru 1500> <asyncmap 0x0> <auth pap> <magic 0x1f5a8f> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: sent [LCP ConfRej id=0xc2 <auth pap>] Jan 13 21:08:26 xtop pppd[839]: rcvd [LCP ConfReq id=0xc2 <mru 1500> <asyncmap 0x0> <auth pap> <magic 0x1f5a8f> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: sent [LCP ConfRej id=0xc2 <auth pap>] Jan 13 21:08:26 xtop pppd[839]: rcvd [LCP ConfReq id=0xc2 <mru 1500> <asyncmap 0x0> <auth pap> <magic 0x1f5a8f> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: sent [LCP ConfRej id=0xc2 <auth pap>] Jan 13 21:08:26 xtop pppd[839]: rcvd [LCP ConfReq id=0xc2 <mru 1500> <asyncmap 0x0> <auth pap> <magic 0x1f5a8f> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: sent [LCP ConfRej id=0xc2 <auth pap>] Jan 13 21:08:26 xtop pppd[839]: rcvd [LCP ConfReq id=0xc3 <mru 1500> <asyncmap 0x0> <magic 0x1f5a8f> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: sent [LCP ConfAck id=0xc3 <mru 1500> <asyncmap 0x0> <magic 0x1f5a8f> <pcomp> <accomp>] Jan 13 21:08:26 xtop pppd[839]: sent [IPCP ConfReq id=0x9 <addr 0.0.0.0> <compress VJ 0f 01>] If anyone can give me some guidance or reference materials for setting up pppd or pppd with this cellular card specifically, I would greatly appreciate it. Thanks in advance! Jeff Cross
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43C86BEF.8070209>