From owner-freebsd-questions Wed Apr 18 11:39:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from ns.internet.dk (ns.internet.dk [194.19.140.1]) by hub.freebsd.org (Postfix) with ESMTP id ED9FF37B422 for ; Wed, 18 Apr 2001 11:39:47 -0700 (PDT) (envelope-from leifn@neland.dk) Received: (from uucp@localhost) by ns.internet.dk (8.11.2/8.11.2) id f3IIdl453395 for freebsd-questions@FreeBSD.ORG.AVP; Wed, 18 Apr 2001 20:39:47 +0200 (CEST) (envelope-from leifn@neland.dk) Received: (from uucp@localhost) by ns.internet.dk (8.11.2/8.11.2) with UUCP id f3IIdkC53389 for freebsd-questions@FreeBSD.ORG; Wed, 18 Apr 2001 20:39:46 +0200 (CEST) (envelope-from leifn@neland.dk) Received: from gina (gina.neland.dk [192.168.5.100] (may be forged)) by arnold.neland.dk (8.11.3/8.11.0) with SMTP id f3IIdW601832 for ; Wed, 18 Apr 2001 20:39:33 +0200 (CEST) (envelope-from leifn@neland.dk) Message-ID: <00f901c0c837$0d5366e0$6405a8c0@neland.dk> From: "Leif Neland" To: Subject: device_probe_and_attach: ed0 attach returned 2 Date: Wed, 18 Apr 2001 20:40:05 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from base64 to 8bit by ns.internet.dk id f3IIdkC53389 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I try to add a second NIC to my gateway machine running -current. (Will be getting ADSL may 10, may 15 my 24h flatrate ISDN changes to 8h flatrate, rest minute charge, talk about timing. So I have 22 days to get this fixed) The first card is a D-LINK 250 isa, it was ed0, but by changing device.hints it became ed1; it is working. The second card is a RealTek 8029 pci. I get the errormessage: device_probe_and_attach: ed0 attach returned 2 I've searched the archives and only found the advice to turn off pnp in the bios. However, my old dec bios does not have that option, neither do I have PNPBIOS in my kernel config (I think that option is depreciated btw) The machine does not have ide-disks, so int15 is available. Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #9: Wed Apr 4 18:49:51 CEST 2001 root@gina.neland.dk:/usr/obj/usr/src/sys/ARNOLD Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 59973117 Hz CPU: Pentium/P5 (59.97-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x515 Stepping = 5 Features=0x1bf real memory = 117440512 (114688K bytes) Preloaded elf kernel "kernel" at 0xc03eb000. Intel Pentium detected, installing workaround for F00F bug npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: on pcib0 ncr0: port 0xd100-0xd1ff mem 0x20000000-0x200000ff irq 11 at device 1.0 on pci0 isab0: at device 2.0 on pci0 isa0: on isab0 pci0: at 6.0 (no driver attached) ed0: irq 15 at device 7.0 on pci0 device_probe_and_attach: ed0 attach returned 2 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 ed1 at port 0x340-0x35f iomem 0xd8000 irq 10 on isa0 ed1: address 00:80:c8:18:9c:c2, type NE2000 (16 bit) ^^^^^^^^^^^^^^^^^^^^^^^ D-LINK 250 ^^^^^^^^^^^^^^^^^ ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc1: at port 0x278-0x27f irq 5 on isa0 ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip1: on ppbus1 lpt1: on ppbus1 lpt1: Interrupt-driven port ppi1: on ppbus1 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16450 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isic0: at port 0x200-0x201,0x202-0x203 irq 9 on isa0 isic0: passive stack unit 0 i4btrc: 2 ISDN trace device(s) attached i4bing: 2 i4b NetGraph ISDN B-channel device(s) attached i4btel: 2 ISDN telephony interface device(s) attached i4bisppp: 4 ISDN SyncPPP device(s) attached (VJ header compression) i4b: ISDN call control device attached i4brbch: 2 raw B channel access device(s) attached i4bipr: 2 IP over raw HDLC ISDN device(s) attached (VJ header compression) i4bctl: ISDN system control port attached Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a cd0 at ncr0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: cd present [234900 x 2048 byte records] da1 at ncr0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da1: 4101MB (8399520 512 byte sectors: 255H 63S/T 522C) da3 at ncr0 bus 0 target 3 lun 0 da3: Fixed Direct Access SCSI-0 device da3: 3.300MB/s transfers da3: 231MB (474602 512 byte sectors: 64H 32S/T 231C) da0 at ncr0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) da2 at ncr0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 10.000MB/s transfers (10.000MHz, offset 8) da2: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C) Leif To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message