Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 28 Aug 2006 13:36:07 +0200
From:      "Raphael H. Becker" <rabe@p-i-n.com>
To:        freebsd-stable@freebsd.org
Subject:   RAID Controller problems (was: Re: kern.ipc.maxpipekva ...)
Message-ID:  <20060828133607.A65093@p-i-n.com>
In-Reply-To: <20060622121421.X1114@ganymede.hub.org>; from scrappy@hub.org on Thu, Jun 22, 2006 at 12:17:12PM -0300
References:  <20060622121421.X1114@ganymede.hub.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

I've also seen this "kernel: kern.maxpipekva exceeded, please see
tuning(7)" on the console of our Dell PE6650, which (again) had lost its 
amr (LSI RAID/Perc). This machine isn't under load but runs rsync every 5
minutes.


amr0@pci3:1:0:  class=0x010400 card=0x05181028 chip=0x19601000 rev=0x01 hdr=0x00
    vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
    device   = 'MegaRAID'
    class    = mass storage
    subclass = RAID

# uname -srm
FreeBSD 6.1-RELEASE-p3 i386


 ... with just this KERNCONF:

include GENERIC

ident PE6650

options SMP
options         COMPAT_FREEBSD4
options         COMPAT_FREEBSD5
 

The amr seems more stable since "Scott's Mega Update" (see: http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/amr/amr_cam.c?rev=1.15.2.1&content-type=text/x-cvsweb-markup&only_with_tag=RELENG_6_1_BP )
but probably under high load or after a while it still fails (no disk
access possible, no messages).

Has anyone else running a Dell PE6650 with this LSI RAID? 
Anyone else got this errors?

Regards
Raphael Becker


On Thu, Jun 22, 2006 at 12:17:12PM -0300, Marc G. Fournier wrote:
> 
> I've read the comments in /usr/src/sys/kern/sys_pipe.c, but couldn't see 
> anything in there ... I'm up to 32M (as set through /boot/loader.conf) and 
> am still hitting the max after a period of time (latest was 7 hours) ...
> 
> Figuring that the last time I checked, I was using something like 7000 
> pipes, @ 16k each, I should be setting it closer to 128M, and that is 
> assuming no 64k pipes ...
> 
> So, is there an 'upper max' that it won't allow me to set it past?
> 
> Thanks ...
> 
> ----
> Marc G. Fournier           Hub.Org Networking Services (http://www.hub.org)
> Email . scrappy@hub.org                              MSN . scrappy@hub.org
> Yahoo . yscrappy               Skype: hub.org        ICQ . 7615664
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060828133607.A65093>