Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 7 Mar 2012 08:33:34 GMT
From:      John Baldwin <jhb@FreeBSD.org>
To:        Perforce Change Reviews <perforce@freebsd.org>
Subject:   PERFORCE change 207573 for review
Message-ID:  <201203070833.q278XYoh057358@skunkworks.freebsd.org>

next in thread | raw e-mail | index | archive | help
http://p4web.freebsd.org/@@207573?ac=10

Change 207573 by jhb@jhb_kavik on 2012/03/07 08:32:44

	IFC @207572

Affected files ...

.. //depot/projects/pci/sys/amd64/amd64/ptrace_machdep.c#2 integrate
.. //depot/projects/pci/sys/amd64/conf/DEFAULTS#4 integrate
.. //depot/projects/pci/sys/amd64/conf/GENERIC#7 integrate
.. //depot/projects/pci/sys/amd64/conf/GENERIC.hints#2 integrate
.. //depot/projects/pci/sys/amd64/conf/NOTES#4 integrate
.. //depot/projects/pci/sys/amd64/include/float.h#3 integrate
.. //depot/projects/pci/sys/amd64/include/ptrace.h#3 integrate
.. //depot/projects/pci/sys/amd64/include/trap.h#3 integrate
.. //depot/projects/pci/sys/arm/conf/DEFAULTS#3 integrate
.. //depot/projects/pci/sys/arm/mv/mvreg.h#2 integrate
.. //depot/projects/pci/sys/boot/fdt/dts/db78100.dts#2 integrate
.. //depot/projects/pci/sys/boot/forth/loader.conf#6 integrate
.. //depot/projects/pci/sys/boot/i386/boot2/boot1.S#2 integrate
.. //depot/projects/pci/sys/boot/i386/boot2/boot2.c#5 integrate
.. //depot/projects/pci/sys/cam/ctl/ctl.c#2 integrate
.. //depot/projects/pci/sys/cam/ctl/ctl.h#2 integrate
.. //depot/projects/pci/sys/cam/ctl/ctl_backend.h#2 integrate
.. //depot/projects/pci/sys/cam/ctl/ctl_backend_block.c#2 integrate
.. //depot/projects/pci/sys/cam/ctl/ctl_backend_ramdisk.c#2 integrate
.. //depot/projects/pci/sys/cam/ctl/ctl_error.c#2 integrate
.. //depot/projects/pci/sys/cam/ctl/ctl_ioctl.h#2 integrate
.. //depot/projects/pci/sys/compat/freebsd32/freebsd32_misc.c#7 integrate
.. //depot/projects/pci/sys/compat/ndis/subr_hal.c#2 integrate
.. //depot/projects/pci/sys/conf/files.amd64#5 integrate
.. //depot/projects/pci/sys/conf/files.i386#7 integrate
.. //depot/projects/pci/sys/conf/kern.mk#6 integrate
.. //depot/projects/pci/sys/conf/kern.pre.mk#6 integrate
.. //depot/projects/pci/sys/conf/kmod.mk#6 integrate
.. //depot/projects/pci/sys/dev/fdt/fdt_common.c#3 integrate
.. //depot/projects/pci/sys/dev/fdt/fdt_common.h#2 integrate
.. //depot/projects/pci/sys/dev/hwpmc/hwpmc_core.c#4 integrate
.. //depot/projects/pci/sys/dev/mge/if_mge.c#2 integrate
.. //depot/projects/pci/sys/dev/mge/if_mgevar.h#2 integrate
.. //depot/projects/pci/sys/dev/oce/oce_hw.c#2 integrate
.. //depot/projects/pci/sys/dev/pci/hostb_pci.c#3 integrate
.. //depot/projects/pci/sys/dev/pci/pci.c#33 integrate
.. //depot/projects/pci/sys/dev/pci/pci_if.m#2 integrate
.. //depot/projects/pci/sys/dev/pci/pci_private.h#10 integrate
.. //depot/projects/pci/sys/dev/pci/pcivar.h#9 integrate
.. //depot/projects/pci/sys/dev/pci/vga_pci.c#2 integrate
.. //depot/projects/pci/sys/dev/siba/siba_bwn.c#3 integrate
.. //depot/projects/pci/sys/dev/tsec/if_tsec.c#3 integrate
.. //depot/projects/pci/sys/dev/tsec/if_tsec.h#2 integrate
.. //depot/projects/pci/sys/dev/tsec/if_tsec_fdt.c#3 integrate
.. //depot/projects/pci/sys/dev/uart/uart_bus_pci.c#4 integrate
.. //depot/projects/pci/sys/dev/usb/controller/dwc_otg.c#2 integrate
.. //depot/projects/pci/sys/dev/usb/controller/dwc_otg.h#2 integrate
.. //depot/projects/pci/sys/dev/usb/controller/dwc_otg_atmelarm.c#2 integrate
.. //depot/projects/pci/sys/dev/virtio/pci/virtio_pci.c#2 integrate
.. //depot/projects/pci/sys/dev/wbwd/wbwd.c#1 branch
.. //depot/projects/pci/sys/fs/cd9660/cd9660_vfsops.c#4 integrate
.. //depot/projects/pci/sys/fs/cd9660/cd9660_vnops.c#3 integrate
.. //depot/projects/pci/sys/fs/fifofs/fifo.h#3 integrate
.. //depot/projects/pci/sys/fs/fifofs/fifo_vnops.c#3 integrate
.. //depot/projects/pci/sys/fs/hpfs/hpfs_vfsops.c#4 integrate
.. //depot/projects/pci/sys/fs/msdosfs/msdosfs_vfsops.c#4 integrate
.. //depot/projects/pci/sys/fs/ntfs/ntfs_vfsops.c#4 integrate
.. //depot/projects/pci/sys/fs/pseudofs/pseudofs_vnops.c#3 integrate
.. //depot/projects/pci/sys/i386/conf/DEFAULTS#4 integrate
.. //depot/projects/pci/sys/i386/conf/GENERIC#7 integrate
.. //depot/projects/pci/sys/i386/conf/GENERIC.hints#2 integrate
.. //depot/projects/pci/sys/i386/conf/NOTES#4 integrate
.. //depot/projects/pci/sys/i386/conf/XBOX#4 integrate
.. //depot/projects/pci/sys/i386/include/float.h#3 integrate
.. //depot/projects/pci/sys/i386/include/ptrace.h#3 integrate
.. //depot/projects/pci/sys/i386/include/trap.h#3 integrate
.. //depot/projects/pci/sys/ia64/conf/DEFAULTS#4 integrate
.. //depot/projects/pci/sys/kern/kern_jail.c#8 integrate
.. //depot/projects/pci/sys/kern/kern_lock.c#4 integrate
.. //depot/projects/pci/sys/kern/kern_racct.c#7 integrate
.. //depot/projects/pci/sys/kern/sys_generic.c#3 integrate
.. //depot/projects/pci/sys/kern/sys_pipe.c#5 integrate
.. //depot/projects/pci/sys/mips/atheros/if_arge.c#6 integrate
.. //depot/projects/pci/sys/mips/conf/DEFAULTS#3 integrate
.. //depot/projects/pci/sys/mips/include/asm.h#3 integrate
.. //depot/projects/pci/sys/mips/include/cpu.h#2 integrate
.. //depot/projects/pci/sys/mips/include/cpuregs.h#4 integrate
.. //depot/projects/pci/sys/mips/include/locore.h#2 integrate
.. //depot/projects/pci/sys/mips/include/tls.h#1 branch
.. //depot/projects/pci/sys/mips/include/ucontext.h#3 integrate
.. //depot/projects/pci/sys/mips/mips/cpu.c#4 integrate
.. //depot/projects/pci/sys/mips/mips/elf64_machdep.c#4 delete
.. //depot/projects/pci/sys/mips/mips/exception.S#5 integrate
.. //depot/projects/pci/sys/mips/mips/freebsd32_machdep.c#2 integrate
.. //depot/projects/pci/sys/mips/mips/genassym.c#5 integrate
.. //depot/projects/pci/sys/mips/mips/locore.S#4 integrate
.. //depot/projects/pci/sys/mips/mips/machdep.c#4 integrate
.. //depot/projects/pci/sys/mips/mips/mpboot.S#2 integrate
.. //depot/projects/pci/sys/mips/mips/pm_machdep.c#3 integrate
.. //depot/projects/pci/sys/mips/mips/support.S#3 integrate
.. //depot/projects/pci/sys/mips/mips/trap.c#5 integrate
.. //depot/projects/pci/sys/mips/mips/vm_machdep.c#4 integrate
.. //depot/projects/pci/sys/mips/sibyte/sb_machdep.c#3 integrate
.. //depot/projects/pci/sys/modules/Makefile#8 integrate
.. //depot/projects/pci/sys/modules/dtrace/dtrace/Makefile#2 integrate
.. //depot/projects/pci/sys/modules/usb/Makefile#5 integrate
.. //depot/projects/pci/sys/modules/usb/dwc_otg/Makefile#1 branch
.. //depot/projects/pci/sys/modules/wbwd/Makefile#1 branch
.. //depot/projects/pci/sys/net/ieee8023ad_lacp.c#3 integrate
.. //depot/projects/pci/sys/net/if_ethersubr.c#5 integrate
.. //depot/projects/pci/sys/net/if_lagg.c#7 integrate
.. //depot/projects/pci/sys/net/if_lagg.h#3 integrate
.. //depot/projects/pci/sys/net80211/ieee80211.h#3 integrate
.. //depot/projects/pci/sys/net80211/ieee80211_action.c#2 integrate
.. //depot/projects/pci/sys/net80211/ieee80211_alq.c#3 integrate
.. //depot/projects/pci/sys/net80211/ieee80211_alq.h#2 integrate
.. //depot/projects/pci/sys/net80211/ieee80211_hwmp.c#3 integrate
.. //depot/projects/pci/sys/net80211/ieee80211_input.c#5 integrate
.. //depot/projects/pci/sys/net80211/ieee80211_mesh.c#4 integrate
.. //depot/projects/pci/sys/net80211/ieee80211_mesh.h#3 integrate
.. //depot/projects/pci/sys/net80211/ieee80211_output.c#6 integrate
.. //depot/projects/pci/sys/netinet/icmp6.h#3 integrate
.. //depot/projects/pci/sys/netinet/ip_mroute.c#3 integrate
.. //depot/projects/pci/sys/netinet6/nd6.c#6 integrate
.. //depot/projects/pci/sys/pc98/conf/DEFAULTS#4 integrate
.. //depot/projects/pci/sys/pc98/include/float.h#2 integrate
.. //depot/projects/pci/sys/pc98/include/ptrace.h#2 integrate
.. //depot/projects/pci/sys/pc98/include/trap.h#2 integrate
.. //depot/projects/pci/sys/powerpc/conf/DEFAULTS#3 integrate
.. //depot/projects/pci/sys/powerpc/include/asm.h#3 integrate
.. //depot/projects/pci/sys/powerpc/powermac/smu.c#5 integrate
.. //depot/projects/pci/sys/sparc64/conf/DEFAULTS#3 integrate
.. //depot/projects/pci/sys/sys/cdefs.h#3 integrate
.. //depot/projects/pci/sys/sys/pipe.h#3 integrate
.. //depot/projects/pci/sys/sys/racct.h#5 integrate
.. //depot/projects/pci/sys/x86/include/_stdint.h#2 integrate
.. //depot/projects/pci/sys/x86/include/float.h#1 branch
.. //depot/projects/pci/sys/x86/include/ptrace.h#1 branch
.. //depot/projects/pci/sys/x86/include/trap.h#1 branch

Differences ...

==== //depot/projects/pci/sys/amd64/amd64/ptrace_machdep.c#2 (text+ko) ====

@@ -26,7 +26,7 @@
  */
 
 #include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/sys/amd64/amd64/ptrace_machdep.c,v 1.1 2012/01/21 17:45:27 kib Exp $");
+__FBSDID("$FreeBSD: src/sys/amd64/amd64/ptrace_machdep.c,v 1.2 2012/03/04 20:24:28 tijl Exp $");
 
 #include "opt_compat.h"
 
@@ -126,6 +126,12 @@
 		return (cpu32_ptrace(td, req, addr, data));
 #endif
 
+	/* Support old values of PT_GETXSTATE and PT_SETXSTATE. */
+	if (req == PT_FIRSTMACH + 0)
+		req = PT_GETXSTATE;
+	if (req == PT_FIRSTMACH + 1)
+		req = PT_SETXSTATE;
+
 	switch (req) {
 	case PT_GETXSTATE:
 	case PT_SETXSTATE:

==== //depot/projects/pci/sys/amd64/conf/DEFAULTS#4 (text+ko) ====

@@ -1,7 +1,7 @@
 #
 # DEFAULTS -- Default kernel configuration file for FreeBSD/amd64
 #
-# $FreeBSD: src/sys/amd64/conf/DEFAULTS,v 1.23 2011/11/08 10:18:07 attilio Exp $
+# $FreeBSD: src/sys/amd64/conf/DEFAULTS,v 1.24 2012/03/06 20:01:25 attilio Exp $
 
 machine		amd64
 
@@ -22,6 +22,3 @@
 options 	GEOM_PART_MBR
 
 options 	NEW_PCIB
-
-# Allow mounting non-MPSAFE filesystems
-options		VFS_ALLOW_NONMPSAFE

==== //depot/projects/pci/sys/amd64/conf/GENERIC#7 (text+ko) ====

@@ -16,7 +16,7 @@
 # If you are in doubt as to the purpose or necessity of a line, check first
 # in NOTES.
 #
-# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.580 2012/03/03 00:11:46 jkim Exp $
+# $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.582 2012/03/05 18:47:42 jkim Exp $
 
 cpu		HAMMER
 ident		GENERIC
@@ -168,7 +168,7 @@
 device		kbdmux		# keyboard multiplexer
 
 device		vga		# VGA video card driver
-options		VESA		# add support for VESA BIOS Extensions
+options 	VESA		# Add support for VESA BIOS Extensions (VBE)
 
 device		splash		# Splash screen and screen saver support
 
@@ -303,39 +303,8 @@
 device		ehci		# EHCI PCI->USB interface (USB 2.0)
 device		xhci		# XHCI PCI->USB interface (USB 3.0)
 device		usb		# USB Bus (required)
-#device		udbp		# USB Double Bulk Pipe devices (needs netgraph)
-device		uhid		# "Human Interface Devices"
 device		ukbd		# Keyboard
-device		ulpt		# Printer
 device		umass		# Disks/Mass storage - Requires scbus and da
-device		ums		# Mouse
-device		urio		# Diamond Rio 500 MP3 player
-# USB Serial devices
-device		u3g		# USB-based 3G modems (Option, Huawei, Sierra)
-device		uark		# Technologies ARK3116 based serial adapters
-device		ubsa		# Belkin F5U103 and compatible serial adapters
-device		uftdi		# For FTDI usb serial adapters
-device		uipaq		# Some WinCE based devices
-device		uplcom		# Prolific PL-2303 serial adapters
-device		uslcom		# SI Labs CP2101/CP2102 serial adapters
-device		uvisor		# Visor and Palm devices
-device		uvscom		# USB serial support for DDI pocket's PHS
-# USB Ethernet, requires miibus
-device		aue		# ADMtek USB Ethernet
-device		axe		# ASIX Electronics USB Ethernet
-device		cdce		# Generic USB over Ethernet
-device		cue		# CATC USB Ethernet
-device		kue		# Kawasaki LSI USB Ethernet
-device		rue		# RealTek RTL8150 USB Ethernet
-device		udav		# Davicom DM9601E USB
-# USB Wireless
-device		rum		# Ralink Technology RT2501USB wireless NICs
-device		run		# Ralink Technology RT2700/RT2800/RT3000 NICs.
-device		uath		# Atheros AR5523 wireless NICs
-device		upgt		# Conexant/Intersil PrismGT wireless NICs.
-device		ural		# Ralink Technology RT2500USB wireless NICs
-device		urtw		# Realtek RTL8187B/L wireless NICs
-device		zyd		# ZyDAS zd1211/zd1211b wireless NICs
 
 # FireWire support
 device		firewire	# FireWire bus code
@@ -351,7 +320,6 @@
 device		snd_es137x	# Ensoniq AudioPCI ES137x
 device		snd_hda		# Intel High Definition Audio
 device		snd_ich		# Intel, NVidia and other ICH AC'97 Audio
-device		snd_uaudio	# USB Audio
 device		snd_via8233	# VIA VT8233x Audio
 
 # MMC/SD

==== //depot/projects/pci/sys/amd64/conf/GENERIC.hints#2 (text+ko) ====

@@ -1,4 +1,4 @@
-# $FreeBSD: src/sys/amd64/conf/GENERIC.hints,v 1.22 2010/07/16 23:21:46 mav Exp $
+# $FreeBSD: src/sys/amd64/conf/GENERIC.hints,v 1.23 2012/03/06 18:44:52 bz Exp $
 hint.fdc.0.at="isa"
 hint.fdc.0.port="0x3F0"
 hint.fdc.0.irq="6"
@@ -30,3 +30,4 @@
 hint.attimer.0.at="isa"
 hint.attimer.0.port="0x40"
 hint.attimer.0.irq="0"
+hint.wbwd.0.at="isa"

==== //depot/projects/pci/sys/amd64/conf/NOTES#4 (text+ko) ====

@@ -4,7 +4,7 @@
 # This file contains machine dependent kernel configuration notes.  For
 # machine independent notes, look in /sys/conf/NOTES.
 #
-# $FreeBSD: src/sys/amd64/conf/NOTES,v 1.113 2012/01/31 19:38:18 jimharris Exp $
+# $FreeBSD: src/sys/amd64/conf/NOTES,v 1.114 2012/03/06 18:44:52 bz Exp $
 #
 
 #
@@ -465,10 +465,12 @@
 # ichwd: Intel ICH watchdog timer
 # amdsbwd: AMD SB7xx watchdog timer
 # viawd: VIA south bridge watchdog timer
+# wbwd: Winbond watchdog timer
 #
 device		ichwd
 device		amdsbwd
 device		viawd
+device		wbwd
 
 #
 # Temperature sensors:

==== //depot/projects/pci/sys/amd64/include/float.h#3 (text+ko) ====

@@ -1,94 +1,6 @@
 /*-
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	from: @(#)float.h	7.1 (Berkeley) 5/8/90
- * $FreeBSD: src/sys/amd64/include/float.h,v 1.17 2012/01/23 06:36:41 das Exp $
+ * This file is in the public domain.
  */
+/* $FreeBSD: src/sys/amd64/include/float.h,v 1.18 2012/03/04 14:00:32 tijl Exp $ */
 
-#ifndef _MACHINE_FLOAT_H_
-#define _MACHINE_FLOAT_H_ 1
-
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-extern int __flt_rounds(void);
-__END_DECLS
-
-#define FLT_RADIX	2		/* b */
-#define FLT_ROUNDS	__flt_rounds()
-#if __ISO_C_VISIBLE >= 1999
-#define	FLT_EVAL_METHOD	0		/* no promotions */
-#define	DECIMAL_DIG	21		/* max precision in decimal digits */
-#endif
-
-#define FLT_MANT_DIG	24		/* p */
-#define FLT_EPSILON	1.19209290E-07F	/* b**(1-p) */
-#define FLT_DIG		6		/* floor((p-1)*log10(b))+(b == 10) */
-#define FLT_MIN_EXP	(-125)		/* emin */
-#define FLT_MIN		1.17549435E-38F	/* b**(emin-1) */
-#define FLT_MIN_10_EXP	(-37)		/* ceil(log10(b**(emin-1))) */
-#define FLT_MAX_EXP	128		/* emax */
-#define FLT_MAX		3.40282347E+38F	/* (1-b**(-p))*b**emax */
-#define FLT_MAX_10_EXP	38		/* floor(log10((1-b**(-p))*b**emax)) */
-#if __ISO_C_VISIBLE >= 2011
-#define	FLT_TRUE_MIN	1.40129846E-45F	/* b**(emin-p) */
-#define	FLT_DECIMAL_DIG	9		/* ceil(1+p*log10(b)) */
-#define	FLT_HAS_SUBNORM	1
-#endif /* __ISO_C_VISIBLE >= 2011 */
-
-#define DBL_MANT_DIG	53
-#define DBL_EPSILON	2.2204460492503131E-16
-#define DBL_DIG		15
-#define DBL_MIN_EXP	(-1021)
-#define DBL_MIN		2.2250738585072014E-308
-#define DBL_MIN_10_EXP	(-307)
-#define DBL_MAX_EXP	1024
-#define DBL_MAX		1.7976931348623157E+308
-#define DBL_MAX_10_EXP	308
-#if __ISO_C_VISIBLE >= 2011
-#define	DBL_TRUE_MIN	4.9406564584124654E-324
-#define	DBL_DECIMAL_DIG	17
-#define	DBL_HAS_SUBNORM	1
-#endif /* __ISO_C_VISIBLE >= 2011 */
-
-#define LDBL_MANT_DIG	64
-#define LDBL_EPSILON	1.0842021724855044340E-19L
-#define LDBL_DIG	18
-#define LDBL_MIN_EXP	(-16381)
-#define LDBL_MIN	3.3621031431120935063E-4932L
-#define LDBL_MIN_10_EXP	(-4931)
-#define LDBL_MAX_EXP	16384
-#define LDBL_MAX	1.1897314953572317650E+4932L
-#define LDBL_MAX_10_EXP	4932
-#if __ISO_C_VISIBLE >= 2011
-#define	LDBL_TRUE_MIN	3.6451995318824746025E-4951L
-#define	LDBL_DECIMAL_DIG 21
-#define	LDBL_HAS_SUBNORM 1
-#endif /* __ISO_C_VISIBLE >= 2011 */
-
-#endif /* _MACHINE_FLOAT_H_ */
+#include <x86/float.h>

==== //depot/projects/pci/sys/amd64/include/ptrace.h#3 (text+ko) ====

@@ -1,41 +1,6 @@
 /*-
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	@(#)ptrace.h	8.1 (Berkeley) 6/11/93
- * $FreeBSD: src/sys/amd64/include/ptrace.h,v 1.14 2012/01/21 17:45:27 kib Exp $
+ * This file is in the public domain.
  */
+/* $FreeBSD: src/sys/amd64/include/ptrace.h,v 1.15 2012/03/04 20:24:28 tijl Exp $ */
 
-#ifndef _MACHINE_PTRACE_H_
-#define _MACHINE_PTRACE_H_
-
-#define	__HAVE_PTRACE_MACHDEP
-
-#define PT_GETXSTATE	(PT_FIRSTMACH + 0)
-#define PT_SETXSTATE	(PT_FIRSTMACH + 1)
-
-#endif
+#include <x86/ptrace.h>

==== //depot/projects/pci/sys/amd64/include/trap.h#3 (text+ko) ====

@@ -1,95 +1,6 @@
 /*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * William Jolitz.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *	from: @(#)trap.h	5.4 (Berkeley) 5/9/91
- * $FreeBSD: src/sys/amd64/include/trap.h,v 1.17 2011/11/07 01:53:25 rstone Exp $
+ * This file is in the public domain.
  */
+/* $FreeBSD: src/sys/amd64/include/trap.h,v 1.18 2012/03/04 14:12:57 tijl Exp $ */
 
-#ifndef _MACHINE_TRAP_H_
-#define	_MACHINE_TRAP_H_
-
-/*
- * Trap type values
- * also known in trap.c for name strings
- */
-
-#define	T_PRIVINFLT	1	/* privileged instruction */
-#define	T_BPTFLT	3	/* breakpoint instruction */
-#define	T_ARITHTRAP	6	/* arithmetic trap */
-#define	T_PROTFLT	9	/* protection fault */
-#define	T_TRCTRAP	10	/* debug exception (sic) */
-#define	T_PAGEFLT	12	/* page fault */
-#define	T_ALIGNFLT	14	/* alignment fault */
-
-#define	T_DIVIDE	18	/* integer divide fault */
-#define	T_NMI		19	/* non-maskable trap */
-#define	T_OFLOW		20	/* overflow trap */
-#define	T_BOUND		21	/* bound instruction fault */
-#define	T_DNA		22	/* device not available fault */
-#define	T_DOUBLEFLT	23	/* double fault */
-#define	T_FPOPFLT	24	/* fp coprocessor operand fetch fault */
-#define	T_TSSFLT	25	/* invalid tss fault */
-#define	T_SEGNPFLT	26	/* segment not present fault */
-#define	T_STKFLT	27	/* stack fault */
-#define	T_MCHK		28	/* machine check trap */
-#define	T_XMMFLT	29	/* SIMD floating-point exception */
-#define	T_RESERVED	30	/* reserved (unknown) */
-#define	T_DTRACE_RET	32	/* DTrace pid return */
-#define	T_DTRACE_PROBE	33	/* DTrace fasttrap probe */
-
-/* XXX most of the following codes aren't used, but could be. */
-
-/* definitions for <sys/signal.h> */
-#define	    ILL_RESAD_FAULT	T_RESADFLT
-#define	    ILL_PRIVIN_FAULT	T_PRIVINFLT
-#define	    ILL_RESOP_FAULT	T_RESOPFLT
-#define	    ILL_ALIGN_FAULT	T_ALIGNFLT
-#define	    ILL_FPOP_FAULT	T_FPOPFLT	/* coprocessor operand fault */
-
-/* old FreeBSD macros, deprecated */
-#define	FPE_INTOVF_TRAP	0x1	/* integer overflow */
-#define	FPE_INTDIV_TRAP	0x2	/* integer divide by zero */
-#define	FPE_FLTDIV_TRAP	0x3	/* floating/decimal divide by zero */
-#define	FPE_FLTOVF_TRAP	0x4	/* floating overflow */
-#define	FPE_FLTUND_TRAP	0x5	/* floating underflow */
-#define	FPE_FPU_NP_TRAP	0x6	/* floating point unit not present  */
-#define	FPE_SUBRNG_TRAP	0x7	/* subrange out of bounds */
-
-/* codes for SIGBUS */
-#define	    BUS_PAGE_FAULT	T_PAGEFLT	/* page fault protection base */
-#define	    BUS_SEGNP_FAULT	T_SEGNPFLT	/* segment not present */
-#define	    BUS_STK_FAULT	T_STKFLT	/* stack segment */
-#define	    BUS_SEGM_FAULT	T_RESERVED	/* segment protection base */
-
-/* Trap's coming from user mode */
-#define	T_USER	0x100
-
-#endif /* !_MACHINE_TRAP_H_ */
+#include <x86/trap.h>

==== //depot/projects/pci/sys/arm/conf/DEFAULTS#3 (text+ko) ====

@@ -1,7 +1,7 @@
 #
 # DEFAULTS -- Default kernel configuration file for FreeBSD/arm
 #
-# $FreeBSD: src/sys/arm/conf/DEFAULTS,v 1.5 2011/11/08 10:18:07 attilio Exp $
+# $FreeBSD: src/sys/arm/conf/DEFAULTS,v 1.6 2012/03/06 20:01:25 attilio Exp $
 
 machine 	arm
 
@@ -9,5 +9,3 @@
 
 options 	GEOM_PART_BSD
 options 	GEOM_PART_MBR
-
-options		VFS_ALLOW_NONMPSAFE

==== //depot/projects/pci/sys/arm/mv/mvreg.h#2 (text+ko) ====

@@ -28,138 +28,12 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $FreeBSD: src/sys/arm/mv/mvreg.h,v 1.9 2010/06/13 13:28:53 raj Exp $
+ * $FreeBSD: src/sys/arm/mv/mvreg.h,v 1.10 2012/03/04 18:13:45 raj Exp $
  */
 
 #ifndef _MVREG_H_
 #define _MVREG_H_
 
-/*
- * Interrupt sources
- */
-#if defined(SOC_MV_ORION)
-
-#define MV_INT_BRIDGE		0	/* AHB-MBus Bridge Interrupt */
-#define MV_INT_UART0		3	/* UART0 Interrupt */
-#define MV_INT_UART1		4
-#define MV_INT_GPIO7_0		6	/* GPIO[7:0] Interrupt */
-#define MV_INT_GPIO15_8		7	/* GPIO[15:8] Interrupt */
-#define MV_INT_GPIO23_16	8	/* GPIO[23:16] Interrupt */
-#define MV_INT_GPIO31_24	9	/* GPIO[31:24] Interrupt */
-#define MV_INT_PEX0_ERR		10	/* PCI Express Error */
-#define MV_INT_PEX0		11	/* PCI Express INTA,B,C,D Message */
-#define MV_INT_PCI_ERR		15	/* PCI Error */
-#define MV_INT_USB_BERR		16	/* USB Bridge Error */
-#define MV_INT_USB_CI		17	/* USB Controller interrupt */
-#define MV_INT_GBERX		18	/* GbE receive interrupt */
-#define MV_INT_GBETX		19	/* GbE transmit interrupt */
-#define MV_INT_GBEMISC		20	/* GbE misc. interrupt */
-#define MV_INT_GBESUM		21	/* GbE summary interrupt */
-#define MV_INT_GBEERR		22	/* GbE error interrupt */
-#define MV_INT_IDMA_ERR		23	/* DMA error interrupt */
-#define MV_INT_IDMA0		24	/* IDMA chan. 0 completion interrupt */
-#define MV_INT_IDMA1		25	/* IDMA chan. 1 completion interrupt */
-#define MV_INT_IDMA2		26	/* IDMA chan. 2 completion interrupt */
-#define MV_INT_IDMA3		27	/* IDMA chan. 3 completion interrupt */
-#define MV_INT_SATA		29	/* Serial-ATA Interrupt */
-
-#elif defined(SOC_MV_KIRKWOOD)
-
-#define MV_INT_BRIDGE		1	/* AHB-MBus Bridge Interrupt */
-#define MV_INT_XOR0_CHAN0	5	/* XOR engine 0 channel 0 Interrupt */
-#define MV_INT_XOR0_CHAN1	6	/* XOR engine 0 channel 1 Interrupt */
-#define MV_INT_XOR1_CHAN0	7	/* XOR engine 1 channel 0 Interrupt */
-#define MV_INT_XOR1_CHAN1	8	/* XOR engine 1 channel 1 Interrupt */
-#define MV_INT_PEX0		9	/* PCI Express INTA,B,C,D Message */
-#define MV_INT_GBESUM		11	/* GbE0 summary interrupt */
-#define MV_INT_GBERX		12	/* GbE0 receive interrupt */
-#define MV_INT_GBETX		13	/* GbE0 transmit interrupt */
-#define MV_INT_GBEMISC		14	/* GbE0 misc. interrupt */
-#define MV_INT_GBE1SUM		15	/* GbE1 summary interrupt */
-#define MV_INT_GBE1RX		16	/* GbE1 receive interrupt */
-#define MV_INT_GBE1TX		17	/* GbE1 transmit interrupt */
-#define MV_INT_GBE1MISC		18	/* GbE1 misc. interrupt */
-#define MV_INT_USB_CI		19	/* USB Controller interrupt */
-#define MV_INT_SATA		21	/* Serial-ATA Interrupt */
-#define MV_INT_CESA		22	/* Security engine completion int. */
-#define MV_INT_IDMA_ERR		23	/* DMA error interrupt */
-#define MV_INT_UART0		33	/* UART0 Interrupt */
-#define MV_INT_UART1		34
-#define MV_INT_GPIO7_0		35	/* GPIO[7:0] Interrupt */
-#define MV_INT_GPIO15_8		36	/* GPIO[15:8] Interrupt */
-#define MV_INT_GPIO23_16	37	/* GPIO[23:16] Interrupt */
-#define MV_INT_GPIO31_24	38	/* GPIO[31:24] Interrupt */
-#define MV_INT_GPIOHI7_0	39	/* GPIOHI[7:0] Interrupt */
-#define MV_INT_GPIOHI15_8	40	/* GPIOHI[15:8] Interrupt */
-#define MV_INT_GPIOHI23_16	41	/* GPIOHI[23:16] Interrupt */
-#define MV_INT_XOR0_ERR		42	/* XOR engine 0 error Interrupt */
-#define MV_INT_XOR1_ERR		43	/* XOR engine 1 error Interrupt */
-#define MV_INT_PEX0_ERR		44	/* PCI Express Error */
-#define MV_INT_GBEERR		46	/* GbE0 error interrupt */
-#define MV_INT_GBE1ERR		47	/* GbE1 error interrupt */
-#define MV_INT_USB_BERR		48	/* USB Bridge Error */
-
-#elif defined(SOC_MV_DISCOVERY)
-
-#define MV_INT_ERRSUM		0	/* Summary of error interrupts */
-#define MV_INT_SPI		1	/* SPI interrupt */
-#define MV_INT_TWSI0		2	/* TWSI0 interrupt */
-#define MV_INT_TWSI1		3	/* TWSI1 interrupt */
-#define MV_INT_IDMA0		4	/* IDMA Channel0 completion */
-#define MV_INT_IDMA1		5	/* IDMA Channel0 completion */
-#define MV_INT_IDMA2		6	/* IDMA Channel0 completion */
-#define MV_INT_IDMA3		7	/* IDMA Channel0 completion */
-#define MV_INT_TIMER0		8	/* Timer0 interrupt */
-#define MV_INT_TIMER1		9	/* Timer1 interrupt */
-#define MV_INT_TIMER2		10	/* Timer2 interrupt */
-#define MV_INT_TIMER3		11	/* Timer3 interrupt */
-#define MV_INT_UART0		12	/* UART0 interrupt */
-#define MV_INT_UART1		13	/* UART1 interrupt */
-#define MV_INT_UART2		14	/* UART2 interrupt */
-#define MV_INT_UART3		15	/* UART3 interrupt */
-#define MV_INT_USB0		16	/* USB0 interrupt */
-#define MV_INT_USB1		17	/* USB1 interrupt */
-#define MV_INT_USB2		18	/* USB2 interrupt */
-#define MV_INT_CESA		19	/* Crypto engine completion interrupt */
-#define MV_INT_XOR0		22	/* XOR engine 0 completion interrupt */
-#define MV_INT_XOR1		23	/* XOR engine 1 completion interrupt */
-#define MV_INT_SATA		26	/* SATA interrupt */
-#define MV_INT_PEX00		32	/* PCI Express port 0.0 INTA/B/C/D */
-#define MV_INT_PEX01		33	/* PCI Express port 0.1 INTA/B/C/D */
-#define MV_INT_PEX02		34	/* PCI Express port 0.2 INTA/B/C/D */
-#define MV_INT_PEX03		35	/* PCI Express port 0.3 INTA/B/C/D */
-#define MV_INT_PEX10		36	/* PCI Express port 1.0 INTA/B/C/D */
-#define MV_INT_PEX11		37	/* PCI Express port 1.1 INTA/B/C/D */
-#define MV_INT_PEX12		38	/* PCI Express port 1.2 INTA/B/C/D */
-#define MV_INT_PEX13		39	/* PCI Express port 1.3 INTA/B/C/D */
-#define MV_INT_GBESUM		40	/* Gigabit Ethernet Port 0 summary */
-#define MV_INT_GBERX		41	/* Gigabit Ethernet Port 0 Rx summary */
-#define MV_INT_GBETX		42	/* Gigabit Ethernet Port 0 Tx summary */
-#define MV_INT_GBEMISC		43	/* Gigabit Ethernet Port 0 Misc summ. */
-#define MV_INT_GBE1SUM		44	/* Gigabit Ethernet Port 1 summary */
-#define MV_INT_GBE1RX		45	/* Gigabit Ethernet Port 1 Rx summary */
-#define MV_INT_GBE1TX		46	/* Gigabit Ethernet Port 1 Tx summary */
-#define MV_INT_GBE1MISC		47	/* Gigabit Ethernet Port 1 Misc summ. */
-#define MV_INT_GPIO7_0		56	/* GPIO[7:0] Interrupt */
-#define MV_INT_GPIO15_8		57	/* GPIO[15:8] Interrupt */
-#define MV_INT_GPIO23_16	58	/* GPIO[23:16] Interrupt */
-#define MV_INT_GPIO31_24	59	/* GPIO[31:24] Interrupt */
-#define MV_INT_DB_IN		60	/* Inbound Doorbell Cause reg Summary */
-#define MV_INT_DB_OUT		61	/* Outbound Doorbell Cause reg Summ. */
-#define MV_INT_CRYPT_ERR	64	/* Crypto engine error */
-#define MV_INT_DEV_ERR		65	/* Device bus error */
-#define MV_INT_IDMA_ERR		66	/* DMA error */
-#define MV_INT_CPU_ERR		67	/* CPU error */
-#define MV_INT_PEX0_ERR		68	/* PCI-Express port0 error */
-#define MV_INT_PEX1_ERR		69	/* PCI-Express port1 error */
-#define MV_INT_GBE_ERR		70	/* Gigabit Ethernet error */
-#define MV_INT_USB_ERR		72	/* USB error */
-#define MV_INT_DRAM_ERR		73	/* DRAM ECC error */
-#define MV_INT_XOR_ERR		74	/* XOR engine error */
-#define MV_INT_WD		79	/* WD Timer interrupt */
-
-#endif /* SOC_MV_ORION */
-
 #define BRIDGE_IRQ_CAUSE	0x10
 #define BRIGDE_IRQ_MASK		0x14
 

==== //depot/projects/pci/sys/boot/fdt/dts/db78100.dts#2 (text+ko) ====

@@ -28,7 +28,7 @@
  *
  * Marvell DB-78100 Device Tree Source.
  *
- * $FreeBSD: src/sys/boot/fdt/dts/db78100.dts,v 1.2 2011/02/04 01:09:02 marcel Exp $
+ * $FreeBSD: src/sys/boot/fdt/dts/db78100.dts,v 1.3 2012/03/04 19:22:52 raj Exp $
  */
 
 /dts-v1/;
@@ -221,6 +221,9 @@
 				phy0: ethernet-phy@0 {
 					reg = <0x8>;
 				};
+				phy1: ethernet-phy@1 {
+					reg = <0x9>;
+				};
 			};
 		};
 
@@ -234,17 +237,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <45 46 47 44 70>;
 			interrupt-parent = <&PIC>;
-			phy-handle = <&phy0>;
-
-			mdio@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "mrvl,mdio";
-
-				phy0: ethernet-phy@0 {
-					reg = <0x9>;
-				};
-			};
+			phy-handle = <&phy1>;
 		};
 
 		serial0: serial@12000 {

==== //depot/projects/pci/sys/boot/forth/loader.conf#6 (text+ko) ====

@@ -6,7 +6,7 @@
 #
 # All arguments must be in double quotes.
 #
-# $FreeBSD: src/sys/boot/forth/loader.conf,v 1.163 2012/01/14 17:34:32 eadler Exp $
+# $FreeBSD: src/sys/boot/forth/loader.conf,v 1.164 2012/03/06 18:44:52 bz Exp $
 
 ##############################################################
 ###  Basic configuration options  ############################
@@ -488,6 +488,7 @@
 vpo_load="NO"			# Parallel to SCSI interface driver
 amdtemp_load="NO"		# AMD K8/K10/K11 temperature monitor
 tpm_load="NO"			# Trusted Platform Module
+wbwd_load="NO"			# Winbond watchdog
 
 ##############################################################
 ###  ACPI settings  ##########################################

==== //depot/projects/pci/sys/boot/i386/boot2/boot1.S#2 (text+ko) ====

@@ -12,7 +12,7 @@
  * warranties of merchantability and fitness for a particular
  * purpose.
  *
- * $FreeBSD: src/sys/boot/i386/boot2/boot1.S,v 1.34 2010/11/14 08:31:02 brucec Exp $
+ * $FreeBSD: src/sys/boot/i386/boot2/boot1.S,v 1.35 2012/03/06 20:45:13 jhb Exp $
  */
 
 /* Memory Locations */
@@ -125,7 +125,10 @@
 		mov $start,%sp			#  stack
 /*
  * Relocate ourself to MEM_REL.  Since %cx == 0, the inc %ch sets
- * %cx == 0x100.
+ * %cx == 0x100.  Note that boot1 does not use this relocated copy
+ * of itself while loading boot2; however, BTX reclaims the memory
+ * used by boot1 during its initialization.  As a result, boot2 uses
+ * xread from the relocated copy.
  */
 		mov %sp,%si			# Source
 		mov $MEM_REL,%di		# Destination

==== //depot/projects/pci/sys/boot/i386/boot2/boot2.c#5 (text+ko) ====

@@ -14,7 +14,7 @@
  */
 
 #include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/sys/boot/i386/boot2/boot2.c,v 1.99 2011/10/25 19:45:12 jhb Exp $");
+__FBSDID("$FreeBSD: src/sys/boot/i386/boot2/boot2.c,v 1.100 2012/03/05 19:53:17 jhb Exp $");
 
 #include <sys/param.h>
 #include <sys/disklabel.h>
@@ -128,7 +128,7 @@
     unsigned start;
     int init;
 } dsk;
-static char cmd[512], cmddup[512];
+static char cmd[512], cmddup[512], knamebuf[1024];
 static const char *kname;
 static uint32_t opts;
 static int comspeed = SIOSPD;
@@ -223,7 +223,9 @@
 {
     uint8_t autoboot;
     ino_t ino;
+    size_t nbyte;
 
+    opts = 0;
     kname = NULL;
     dmadat = (void *)(roundup2(__base + (int32_t)&_end, 0x10000) - __base);
     v86.ctl = V86_FLAGS;
@@ -240,8 +242,10 @@
     autoboot = 1;
 
     if ((ino = lookup(PATH_CONFIG)) ||
-        (ino = lookup(PATH_DOTCONFIG)))
-	fsread(ino, cmd, sizeof(cmd));
+        (ino = lookup(PATH_DOTCONFIG))) {
+	nbyte = fsread(ino, cmd, sizeof(cmd) - 1);
+	cmd[nbyte] = '\0';
+    }
 
     if (*cmd) {
 	memcpy(cmddup, cmd, sizeof(cmd));
@@ -258,9 +262,9 @@
      * or in case of failure, try to load a kernel directly instead.
      */
 
-    if (autoboot && !kname) {
+    if (!kname) {
 	kname = PATH_BOOT3;
-	if (!keyhit(3*SECOND)) {
+	if (autoboot && !keyhit(3*SECOND)) {
 	    load();
 	    kname = PATH_KERNEL;
 	}
@@ -457,7 +461,12 @@
 			     ? DRV_HARD : 0) + drv;
 		dsk_meta = 0;
 	    }
-            kname = arg;
+	    if ((i = ep - arg)) {
+		if ((size_t)i >= sizeof(knamebuf))
+		    return -1;
+		memcpy(knamebuf, arg, i + 1);
+		kname = knamebuf;
+	    }
 	}
 	arg = p;
     }

==== //depot/projects/pci/sys/cam/ctl/ctl.c#2 (text+ko) ====

@@ -1,7 +1,11 @@
 /*-
  * Copyright (c) 2003-2009 Silicon Graphics International Corp.
+ * Copyright (c) 2012 The FreeBSD Foundation
  * All rights reserved.
  *
+ * Portions of this software were developed by Edward Tomasz Napierala
+ * under sponsorship from the FreeBSD Foundation.
+ *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
@@ -38,7 +42,7 @@
 #define _CTL_C
 
 #include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/sys/cam/ctl/ctl.c,v 1.2 2012/01/19 18:42:03 ken Exp $");
+__FBSDID("$FreeBSD: src/sys/cam/ctl/ctl.c,v 1.3 2012/03/06 13:43:57 trasz Exp $");
 
 #include <sys/param.h>
 #include <sys/systm.h>
@@ -4797,6 +4801,25 @@
 	return (0);
 }
 
+void
+ctl_lun_capacity_changed(struct ctl_be_lun *be_lun)
+{
+	struct ctl_lun *lun;
+	struct ctl_softc *softc;
+	int i;
+
+	softc = control_softc;
+
+	mtx_lock(&softc->ctl_lock);
+
+	lun = (struct ctl_lun *)be_lun->ctl_lun;
+
+	for (i = 0; i < CTL_MAX_INITIATORS; i++) 
+		lun->pending_sense[i].ua_pending |= CTL_UA_CAPACITY_CHANGED;
+
+	mtx_unlock(&softc->ctl_lock);
+}
+
 /*
  * Backend "memory move is complete" callback for requests that never
  * make it down to say RAIDCore's configuration code.

==== //depot/projects/pci/sys/cam/ctl/ctl.h#2 (text+ko) ====

@@ -28,7 +28,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  *
  * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl.h#5 $
- * $FreeBSD: src/sys/cam/ctl/ctl.h,v 1.1 2012/01/12 00:34:33 ken Exp $
+ * $FreeBSD: src/sys/cam/ctl/ctl.h,v 1.2 2012/03/06 13:43:57 trasz Exp $
  */
 /*
  * Function definitions used both within CTL and potentially in various CTL
@@ -120,7 +120,8 @@
 	CTL_UA_RES_PREEMPT	= 0x0200,
 	CTL_UA_RES_RELEASE	= 0x0400,
 	CTL_UA_REG_PREEMPT  	= 0x0800,
-	CTL_UA_ASYM_ACC_CHANGE  = 0x1000
+	CTL_UA_ASYM_ACC_CHANGE  = 0x1000,
+	CTL_UA_CAPACITY_CHANGED = 0x2000
 } ctl_ua_type;
 
 #ifdef	_KERNEL

==== //depot/projects/pci/sys/cam/ctl/ctl_backend.h#2 (text+ko) ====

@@ -28,7 +28,7 @@
  * POSSIBILITY OF SUCH DAMAGES.
  *
  * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_backend.h#2 $
- * $FreeBSD: src/sys/cam/ctl/ctl_backend.h,v 1.1 2012/01/12 00:34:33 ken Exp $
+ * $FreeBSD: src/sys/cam/ctl/ctl_backend.h,v 1.2 2012/03/06 13:43:57 trasz Exp $
  */
 /*
  * CTL backend driver definitions
@@ -280,6 +280,11 @@
 int ctl_lun_offline(struct ctl_be_lun *be_lun);
 int ctl_lun_online(struct ctl_be_lun *be_lun);
 
+/*
+ * Let the backend notify the initiator about changed capacity.
+ */
+void ctl_lun_capacity_changed(struct ctl_be_lun *be_lun);
+
 #endif /* _KERNEL */
 #endif /* _CTL_BACKEND_H_ */
 

==== //depot/projects/pci/sys/cam/ctl/ctl_backend_block.c#2 (text+ko) ====

@@ -1,8 +1,12 @@
 /*-
  * Copyright (c) 2003 Silicon Graphics International Corp.
  * Copyright (c) 2009-2011 Spectra Logic Corporation
+ * Copyright (c) 2012 The FreeBSD Foundation
  * All rights reserved.
  *
+ * Portions of this software were developed by Edward Tomasz Napierala
+ * under sponsorship from the FreeBSD Foundation.
+ *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
@@ -36,7 +40,7 @@
  * Author: Ken Merry <ken@FreeBSD.org>
  */
 #include <sys/cdefs.h>
-__FBSDID("$FreeBSD: src/sys/cam/ctl/ctl_backend_block.c,v 1.2 2012/01/19 18:42:03 ken Exp $");
+__FBSDID("$FreeBSD: src/sys/cam/ctl/ctl_backend_block.c,v 1.3 2012/03/06 13:43:57 trasz Exp $");
 
 #include <opt_kdtrace.h>
 
@@ -250,6 +254,12 @@
 			       struct ctl_lun_req *req);
 static int ctl_be_block_rm(struct ctl_be_block_softc *softc,
 			   struct ctl_lun_req *req);
+static int ctl_be_block_modify_file(struct ctl_be_block_lun *be_lun,
+				  struct ctl_lun_req *req);
+static int ctl_be_block_modify_dev(struct ctl_be_block_lun *be_lun,
+				 struct ctl_lun_req *req);
+static int ctl_be_block_modify(struct ctl_be_block_softc *softc,
+			   struct ctl_lun_req *req);
 static void ctl_be_block_lun_shutdown(void *be_lun);
 static void ctl_be_block_lun_config_status(void *be_lun,
 					   ctl_lun_config_status status);
@@ -1263,6 +1273,9 @@
 		case CTL_LUNREQ_RM:
 			error = ctl_be_block_rm(softc, lun_req);
 			break;
+		case CTL_LUNREQ_MODIFY:
+			error = ctl_be_block_modify(softc, lun_req);
+			break;
 		default:
 			lun_req->status = CTL_LUN_ERROR;
 			snprintf(lun_req->error_str, sizeof(lun_req->error_str),

>>> TRUNCATED FOR MAIL (1000 lines) <<<



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201203070833.q278XYoh057358>