Date: Sat, 17 May 2003 13:01:43 -0700 From: "Remington L." <madriax@garlic.com> To: <freebsd-mobile@FreeBSD.ORG>, <freebsd-questions@FreeBSD.ORG>, <freebsd-hardware@FreeBSD.ORG> Subject: Weird as* sound problem Message-ID: <200305172001.h4HK1ti109554@windmill-en0.garlic.com>
next in thread | raw e-mail | index | archive | help
FreeBSD 5.0-RELEASE-p7
I have a Sony VAIO GRX570 with a YAMAHA AC-XG Audio. My sound works on =
in
XMMS playing mp3s, here is the catch, the sound dies the second I stop
moving the mouse. How the helldoes that work and how do I fix it
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p7 #0: Sat May 10 09:39:29 PDT 2003
root@:/usr/obj/usr/src/sys/laptop
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b6000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06b60b4.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1590811848 Hz
CPU: Pentium 4 (1590.81-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf24 Stepping =3D 4
=20
Features=3D0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA=
,CMOV
,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory =3D 536346624 (511 MB)
avail memory =3D 513757184 (489 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY B0> on motherboard
Using $PIR table, 7 entries at 0xc00fdf50
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at =
device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port =
0x1800-0x181f
irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev =
1.10/3.00,
addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port =
0x1820-0x183f
irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port =
0x1840-0x185f at
device 29.2 on pci0
pcib0: possible interrupts: 9
pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.07, addr 2
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
pcic0: PCI Memory allocated: 0xe8200000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcib2: possible interrupts: 9
pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 5.1 on pci2
pcic1: PCI Memory allocated: 0xe8201000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci2: <serial bus, FireWire> at device 5.2 (no driver attached)
fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem =
0xe8200000-0xe8200fff
irq 9 at device 8.0 on pci2
fxp0: Ethernet address 08:00:46:51:a4:b2
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem
0xe8000000-0xe80003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at
device 31.5 on pci0
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
orm0: <Option ROMs> at iomem =
0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff
on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 38154MB <HITACHI_DK23DA-40> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <SONY CD-RW/DVD-ROM CRX810E> at ata1-master PIO4
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
(probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
Mounting root from ufs:/dev/ad0s2a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to =
stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining...=20
done
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p7 #0: Sat May 10 09:39:29 PDT 2003
root@:/usr/obj/usr/src/sys/laptop
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b6000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06b60a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1590816744 Hz
CPU: Pentium 4 (1590.82-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf24 Stepping =3D 4
=20
Features=3D0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA=
,CMOV
,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory =3D 536346624 (511 MB)
avail memory =3D 513757184 (489 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY B0> on motherboard
Using $PIR table, 7 entries at 0xc00fdf50
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at =
device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port =
0x1800-0x181f
irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev =
1.10/3.00,
addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port =
0x1820-0x183f
irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port =
0x1840-0x185f at
device 29.2 on pci0
pcib0: possible interrupts: 9
pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 1.10/1.07, addr 2
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
pcic0: PCI Memory allocated: 0xe8200000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcib2: possible interrupts: 9
pcib2: slot 5 INTB routed to irq 9 via \\_SB_.LNKG
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 5.1 on pci2
pcic1: PCI Memory allocated: 0xe8201000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci2: <serial bus, FireWire> at device 5.2 (no driver attached)
fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem =
0xe8200000-0xe8200fff
irq 9 at device 8.0 on pci2
fxp0: Ethernet address 08:00:46:51:a4:b2
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem
0xe8000000-0xe80003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at
device 31.5 on pci0
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
orm0: <Option ROMs> at iomem =
0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff
on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 38154MB <HITACHI_DK23DA-40> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <SONY CD-RW/DVD-ROM CRX810E> at ata1-master PIO4
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present
(probe0:umass-sim0:0:0:0): Unretryable error
Mounting root from ufs:/dev/ad0s2a
nfs server 172.16.64.1:/usr/src: not responding 10 > 9
nfs server 172.16.64.1:/usr/src: is alive again
nfs server 172.16.64.1:/usr/ports: not responding 10 > 9
nfs server 172.16.64.1:/usr/ports: is alive again
drm0: <ATI Radeon LW Mobility 7 (AGP)> port 0x3000-0x30ff mem
0xe8100000-0xe810ffff,0xf0000000-0xf7ffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xec000000 64MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned =
AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
pcm0:play:0: play interrupt timeout, channel dead
pcm0:play:0: play interrupt timeout, channel dead
ums0: at uhub0 port 1 (addr 2) disconnected
ums0: detached
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev =
1.10/3.00,
addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ums0: at uhub1 port 2 (addr 2) disconnected
ums0: detached
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev =
1.10/3.00,
addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200305172001.h4HK1ti109554>