Date: Fri, 01 Nov 2002 08:36:10 +0900 (JST) From: Masahide -mac- NODA <mac@clave.gr.jp> To: mobile@FreeBSD.ORG Subject: Re: wi0: No Mem space on prism2.5? Message-ID: <20021101.083610.11621885.mac@flab.fujitsu.co.jp> In-Reply-To: <20021030161442.GA618@sarang.Singapore.Sun.COM> References: <20021030.230259.74726562.jcc00712@nifty.com> <20021030161442.GA618@sarang.Singapore.Sun.COM>
next in thread | previous in thread | raw e-mail | index | archive | help
### umm, my previos post does't arraive to ML, so i repost it. Wanderful! My laptop's internal Wireless LAN adaptor working! Thank you for your advice, kt. wi0: <Intersil Prism2.5> mem 0xe0300000-0xe0300fff irq 11 at device 13.0 on pci1 end (e0300fff) > sc->memlimit (e02fffff) pcib1: device wi0 requested decoded memory range 0xe0300000-0xe0300fff wi0: 802.11 address: 00:e0:00:87:7d:bf wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary 1.01.00, Station 1.04.01 wi0: wi_has_wep = 1 From: KT Sin <ktsin@acm.org> Subject: Re: wi0: No Mem space on prism2.5? Date: Thu, 31 Oct 2002 00:14:42 +0800 Message-ID: <20021030161442.GA618@sarang.Singapore.Sun.COM> ktsin> I had similar problem with my IBM Thinkpad X23. ktsin> Pls try adding options PCI_ALLOW_UNSUPPORTED_IO_RANGE into your ktsin> kernel config, rebuild kernel and then reboot. ktsin> kt ktsin> On Wed, Oct 30, 2002 at 11:02:59PM +0900, Masahide -mac- NODA wrote: ktsin> > Hi, mobilers :-) ktsin> > ktsin> > My laptop PC has Internal Wireless LAN adaptor. ktsin> > It can use at 4-STABLE, but can't use at 5-CURRENT. ktsin> > ktsin> > At 4-STABLE, it probe and attach below ktsin> > ktsin> > % dmesg -v ktsin> > : ktsin> > found-> vendor=0x1260, dev=0x3873, revid=0x01 ktsin> > class=02-80-00, hdrtype=0x00, mfdev=0 ktsin> > subordinatebus=0 secondarybus=0 ktsin> > intpin=a, irq=11 ktsin> > map[10]: type 1, range 32, base e0300000, size 12 ktsin> > : ktsin> > wi0: <Intersil Prism2.5> mem 0xe0300000-0xe0300fff irq 11 at device 13.0 on pci1 ktsin> > wi0: 802.11 address: 00:e0:00:87:7d:bf ktsin> > wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) ktsin> > wi0: Intersil Firmware: Primary 1.01.00, Station 1.04.01 ktsin> > wi0: wi_has_wep = 1 ktsin> > ktsin> > ktsin> > but, at 5-CURRENT, attach has failed. ktsin> > ktsin> > % dmesg -v ktsin> > : ktsin> > map[10]: type 3, range 32, base e0300000, size 12, enabled ktsin> > found-> vendor=0x1260, dev=0x3873, revid=0x01 ktsin> > bus=1, slot=13, func=0 ktsin> > class=02-80-00, hdrtype=0x00, mfdev=0 ktsin> > cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) ktsin> > lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ktsin> > intpin=a, irq=11 ktsin> > powerspec 2 supports D0 D1 D2 D3 current D0 ktsin> > : ktsin> > wi0: <Intersil Prism2.5> mem 0xe0300000-0xe0300fff irq 11 at device 13.0 on pci1 ktsin> > pcib1: device wi0 requested unsupported memory range 0x0-0xe02fffff (decoding 0xe0200000-0xe02fffff, 0xe0300000-0xe03fffff) ktsin> > wi0: No Mem space on prism2.5? ktsin> > device_probe_and_attach: wi0 attach returned 6 ktsin> > ktsin> > ktsin> > PCI resouce map type is difference, type 1 at 4-STABLE, but type 3 at ktsin> > 5-CURRENT. This diffrence cause this attach problem. ktsin> > ktsin> > Any suggestion to me? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021101.083610.11621885.mac>