Date: Fri, 7 Feb 1997 13:40:24 -0800 (PST) From: Ulf Zimmermann <ulf@Alameda.net> To: asami@vader.cs.berkeley.edu (Satoshi Asami) Cc: pasqual@hal.t.u-tokyo.ac.jp, scsi@freebsd.org Subject: Re: HELP!! ST32155W - Not detected during probing!! Message-ID: <199702072140.NAA26280@bitch.Melmac.org> In-Reply-To: <199702072134.NAA29174@vader.cs.berkeley.edu> from Satoshi Asami at "Feb 7, 97 01:34:48 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> * SCSI ID #0 : CDROM CR-506
> * SCSI ID #15 : Seagate ST32155W Drive C : (80h)
>
> * BIOS Geometrics
> * 0:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors
> * 0 accounted for
>
> It's getting the geometry of your drive correctly from the BIOS.
>
> * Boot Target ID ....... 15 (This was 0 earlier - but NO change at all!)
>
> You mean you had the Hawk it ID 0 and boot target ID 0, or Hawk at 15
> and boot target ID 0? If you haven't tried actually putting the Hawk
> at 0, please try that.
>
> I have installed 2.1.5 successfully on a very similar configuration
> (2940UW, wide Hawk 1GB). So I don't see why the SCSI driver would be
> a problem.
>
> Satoshi
>
Aehm, the Adaptec is normaly on ID 7 for narrow and ID 15 for wide.
You can't put the disk on that ID.
Ulf.
--------------------------------------------------------------------------
Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-769-2936
Alameda Networks, Inc. | http://www.Alameda.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199702072140.NAA26280>