From owner-freebsd-scsi  Fri Feb  7 13:40:34 1997
Return-Path: <owner-freebsd-scsi>
Received: (from root@localhost)
          by freefall.freebsd.org (8.8.5/8.8.5) id NAA21427
          for freebsd-scsi-outgoing; Fri, 7 Feb 1997 13:40:34 -0800 (PST)
Received: from DNS.Lamb.net (root@DNS.Lamb.net [207.90.181.1])
          by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id NAA21420
          for <scsi@freebsd.org>; Fri, 7 Feb 1997 13:40:32 -0800 (PST)
Received: from bitch.Melmac.org (ulf@Bitch.Melmac.org [207.90.181.42]) by DNS.Lamb.net (8.8.5/20.74.3.14) with ESMTP id NAA16716; Fri, 7 Feb 1997 13:40:41 -0800 (PST)
Received: (from ulf@localhost) by bitch.Melmac.org (8.8.5/8.7.6) id NAA26280; Fri, 7 Feb 1997 13:40:24 -0800 (PST)
From: Ulf Zimmermann <ulf@Alameda.net>
Message-Id: <199702072140.NAA26280@bitch.Melmac.org>
Subject: Re: HELP!!  ST32155W - Not detected during probing!!
In-Reply-To: <199702072134.NAA29174@vader.cs.berkeley.edu> from Satoshi Asami at "Feb 7, 97 01:34:48 pm"
To: asami@vader.cs.berkeley.edu (Satoshi Asami)
Date: Fri, 7 Feb 1997 13:40:24 -0800 (PST)
Cc: pasqual@hal.t.u-tokyo.ac.jp, scsi@freebsd.org
X-Mailer: ELM [version 2.4ME+ PL30 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-scsi@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

>  * SCSI  ID #0  : CDROM CR-506
>  * SCSI  ID #15 : Seagate ST32155W  Drive C : (80h)
> 
>  * BIOS Geometrics
>  *   0:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors
>  *   0 accounted for 
> 
> It's getting the geometry of your drive correctly from the BIOS.
> 
>  * Boot Target ID ....... 15 (This was 0 earlier - but NO change at all!)
> 
> You mean you had the Hawk it ID 0 and boot target ID 0, or Hawk at 15
> and boot target ID 0?  If you haven't tried actually putting the Hawk
> at 0, please try that.
> 
> I have installed 2.1.5 successfully on a very similar configuration
> (2940UW, wide Hawk 1GB).  So I don't see why the SCSI driver would be
> a problem.
> 
> Satoshi
> 

Aehm, the Adaptec is normaly on ID 7 for narrow and ID 15 for wide.
You can't put the disk on that ID.

Ulf.

--------------------------------------------------------------------------
Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-769-2936
           Alameda Networks, Inc. | http://www.Alameda.net