Date: Thu, 27 May 2004 13:12:34 -0400 From: "dave" <dmehler26@woh.rr.com> To: <freebsd-questions@freebsd.org> Subject: vinum primary master drive inconsistencies Message-ID: <000501c4440d$cdc61170$0200a8c0@satellite>
next in thread | raw e-mail | index | archive | help
Hello, I've got vinum running on 5.2.1 doing raid1 on two ide drives. I was doing a installworld in single user mode when it crashed. I was unable to use any commands because of missing libraries not installed. I unplugged the master drive, therew in a spare drive as master then did a minimum 5.2.1 install on that. Then mounted my slave drive on the tempoary master drive and copied the libraries. Once that was done i unplugged the temp drive and let the secondary master drive boot which it did, went in to single user mode and completed the make installworld and mergemaster. Now my secondary master drive has the correct data, the primary does not. When i boot i'm getting: vinum: home.p0.s0 is stale by force vinum: usr.p0.s0 is stale by force I'm assuming this means it can't find ad0 which is because i haven't reconnected it. My problem is both drives are bootable, but if i plug in the primary master drive fbsd will boot off that and it won't work. I need to be able to boot off the secondary master drive then copy the data from the secondary master drive to the now inconsistent primary master drive, then reboot and all should be normal. Not sure how to go about this, any advice appreciated. Dave. PS, I love vinum! the secondary
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000501c4440d$cdc61170$0200a8c0>