Date: Thu, 30 Dec 1999 22:50:18 +0800 From: Peter Wemm <peter@netplex.com.au> To: Luigi Rizzo <luigi@info.iet.unipi.it> Cc: Bill Swingle <unfurl@dub.net>, multimedia@FreeBSD.ORG, hackers@FreeBSD.ORG, cg@freebsd.org Subject: Re: soundcards needed to further newpcm development Message-ID: <19991230145018.757B21CA0@overcee.netplex.com.au> In-Reply-To: Message from Luigi Rizzo <luigi@info.iet.unipi.it> of "Thu, 30 Dec 1999 13:47:23 %2B0100." <199912301247.NAA34572@info.iet.unipi.it>
next in thread | previous in thread | raw e-mail | index | archive | help
Luigi Rizzo wrote: > > yamaha ymf711 no yes ? > > yamaha ymf715 no yes ? > > yamaha ymf719 no no ? > > the 711 and 715 are supported in the old "pcm" driver -- apart > from a couple of register writes to set the mixer volume, it is > a fairly good emulation of the 4232 so it works well. The 719 > is undocumented andunfortunately some of the undocumented > pieces refer to the control of the mixer. I have a YMF719E card (that's on the chip itself) that works on a week-old -current (on an Alpha no less): pcm0: <Yamaha SA2> at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 0,1 on isa0 pcm0: interrupting at ISA irq 5 joy0: <Generic PnP Joystick> at port 0x201 on isa0 unknown0: <OPL3-SAX Sound Board> at port 0x100-0x107 on isa0 unknown1: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee irq 11 on isa0 I have another machine (toshiba tecra 8000 laptop) with a yamaha-something in it (this is a PNPBIOS detected device): pcm0: <Yamaha OPL-SAx> at port 0x220-0x233,0x530-0x537,0x388-0x38f,0x330-0x333,0x538-0x539 irq 5 drq 1,0 on isa0 I seem to recall it too was a YHM0021 pnp id, but I don't know exactly what it is. YMH0021: adding io range 0x220-0x233, size=0x14, align=0x1 YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1 YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1 YMH0021: adding io range 0x330-0x333, size=0x4, align=0x1 YMH0021: adding io range 0x538-0x539, size=0x2, align=0x1 YMH0021: adding irq mask 0x20 YMH0021: adding dma mask 0x2 YMH0021: adding dma mask 0x1 YMH0021: start dependant pnpbios: handle 21 device ID YMH0021 (2100a865) It's not a pnp device like the one on the card in the Alpha system. It's statically configured by the bios setup. Cheers, -Peter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991230145018.757B21CA0>