Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 30 May 2013 12:12:21 +0200
From:      Riccardo Veraldi <riccardo.veraldi@gmail.com>
To:        freebsd-scsi@freebsd.org
Subject:   troubles with Seagate (EMC2)  disk
Message-ID:  <51A72605.4050303@gmail.com>

Next in thread | Raw E-Mail | Index | Archive | Help
Hello,
I have a Seagate ST350000 CLAR500 disk.

it is attached to my Sun Blade 1000 running FreeBSD 9.1

I need to label it, create partition and move te root /usr/ var and swap 
from the main boot disk which has corrupted blocks.

so this disk will become my boot disk.

the problem is that I cannot partition it or even access it in anyway

dd: /dev/da6: Invalid argument
1+0 records in
0+0 records out
0 bytes transferred in 0.000700 secs (0 bytes/sec)

this is the disk information:

da6 at isp0 bus 0 scbus2 target 1 lun 0
da6: <SEAGATE ST350000 CLAR500 FDBD> Fixed Direct Access SCSI-3 device
da6: 100.000MB/s transfers WWNN 0x2000001862133c8d WWPN 
0x2100001862133c8d PortID 0xe4
da6: Command Queueing enabled
da6: 476940MB (961745856 520 byte sectors: 255H 63S/T 59865C)

the problem is that disk byte sectors are 520 and not 512

is there a way to reformat it to 512 byte sectors ?

is there a way to make it usable ?

the SCSI III disk has a FC - AL interface (Internal Sun Blade 1000 Caddy).

thank you

Rick





Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?51A72605.4050303>