Date: Mon, 25 Apr 2011 12:44:05 +0100 From: Mark Murray <markm@FreeBSD.org> To: Andrew Turner <andrew@fubar.geek.nz> Cc: freebsd-arm@freebsd.org Subject: Re: OMAP3 patch Message-ID: <E1QEKCz-0005xT-5R@groundzero.grondar.org> In-Reply-To: <20110425170105.37c7d853@fubar.geek.nz> References: <20110425163549.2bcc8551@fubar.geek.nz> <20110425170105.37c7d853@fubar.geek.nz>
next in thread | previous in thread | raw e-mail | index | archive | help
Andrew Turner writes: > On Mon, 25 Apr 2011 16:35:49 +1200 > Andrew Turner <andrew@fubar.geek.nz> wrote: > > > Hello, > > > > With the patch at [1] I am able to get a Beagleboard to the point it > > will start running init to the point it will start to ask for the > > single user shell but is cut off. > > > > As far as I can tell it is stuck in the uart interrupt handler. I > > haven't fully tracked down why it is not working yet and would > > appreciate help looking in to it. > > I've fixed the uart interrupt. It was an issue with the TX FIFO > interrupt. I've replaced the patch at [1] with the fix for this. Most excellent! Do you have a recipe for building and installing this? I'm very familiar with building ind installing regular FBSD; less so with the BB build/install/boot process. M -- Mark R V Murray Cert APS(Open) Dip Phys(Open) BSc Open(Open) BSc(Hons)(Open) Pi: 132511160
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1QEKCz-0005xT-5R>