Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 13 Dec 2016 22:35:17 -0800
From:      Adrian Chadd <adrian.chadd@gmail.com>
To:        laszlo <george@vagner.com>
Cc:        FreeBSD Questions <freebsd-questions@freebsd.org>
Subject:   Re: stuck beacon
Message-ID:  <CAJ-VmokH2eCX-AnaKTjQDY-2Wgam7qvEsXrPjXxPteCJu7VVWw@mail.gmail.com>
In-Reply-To: <8a8ea04c-a103-4b02-520c-ea9f55f6b74c@vagner.com>
References:  <04f4451e-df26-8775-a0d9-3212ea0e9c60@vagner.com> <CAJ-VmomDb2RrFhDOD=J1Di1vA5MJo3PDBjmKnh4EoiEo9aFXBw@mail.gmail.com> <8a8ea04c-a103-4b02-520c-ea9f55f6b74c@vagner.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Weird! Well, it should be fine. I haven't tried that particular chip
in hostap mode though.

Can you try -HEAD and see if it's any better? I've fixed a couple of
things since 11.0 was cut.

Thanks!


-a


On 10 December 2016 at 16:18, laszlo <george@vagner.com> wrote:
>
> yes. is there a reason i should not?  its the highest power module i coul=
d
> find @ 1 watt.
>
> i am specifically using the microtik R11e-2HPnD
> <https://www.google.com/url?sa=3Di&rct=3Dj&q=3D&esrc=3Ds&source=3Dimages&=
cd=3D&cad=3Drja&uact=3D8&ved=3D0ahUKEwj1zOak7urQAhWC3SwKHYYNDfgQjhwIBQ&url=
=3D%2Furl%3Fsa%3Di%26rct%3Dj%26q%3D%26esrc%3Ds%26source%3Dimages%26cd%3D%26=
cad%3Drja%26uact%3D8%26ved%3D%26url%3Dhttps%253A%252F%252Fwww.roc-noc.com%2=
52Fmikrotik%252Frouterboard%252FR11e-2HPnD.html%26psig%3DAFQjCNF7-HnRYsJ21w=
yF1lq9Rgrln3eCsQ%26ust%3D1481501750745986&psig=3DAFQjCNF7-HnRYsJ21wyF1lq9Rg=
rln3eCsQ&ust=3D1481501750745986>
>
> seems to have a great signal.
>
>
>
> On 12/10/2016 1:10 PM, Adrian Chadd wrote:
>>
>> hiya,
>>
>> You're using the AR9580 in hostap mode?
>>
>>
>> -adrian
>>
>>
>> On 9 December 2016 at 18:12, laszlo <george@vagner.com> wrote:
>>>
>>> running 11.0 on a mini ITX as a router in hostap mode
>>>
>>> getting error messages in log
>>>
>>> usually once i start seeing these errors things go down hill fast, like
>>> start not getting ipaddresses and then not authenticating or connection
>>> goes
>>> up and down etc.
>>>
>>>
>>> i believe this has been a big issue long time ago but has anyone ever
>>> found
>>> a fix for it.?
>>>
>>> is there another brand/model of wireless card that can do hostap mode
>>> with
>>> some power output.
>>>
>>>
>>>
>>> kernel: ath0: ath_tx_aggr_comp_aggr: AR5416 bug: hasba=3D0; txok=3D1,
>>> isaggr=3D1,
>>> seq_st=3D1306
>>> Dec  9 20:25:13 gatekeeper kernel: ath0: stuck beacon; resetting (bmiss
>>> count 4)
>>>
>>>
>>> ath0: <Atheros AR9580> mem 0x91200000-0x9121ffff irq 19 at device 0.0 o=
n
>>> pci2
>>> ar9300_attach: calling ar9300_hw_attach
>>> ar9300_hw_attach: calling ar9300_eeprom_attach
>>> ar9300_flash_map: unimplemented for now
>>> Restoring Cal data from DRAM
>>> Restoring Cal data from EEPROM
>>> Restoring Cal data from Flash
>>> Restoring Cal data from Flash
>>> Restoring Cal data from OTP
>>> ar9300_hw_attach: ar9300_eeprom_attach returned 0
>>> ath0: [HT] enabling HT modes
>>> ath0: [HT] enabling short-GI in 20MHz mode
>>> ath0: [HT] 1 stream STBC receive enabled
>>> ath0: [HT] 1 stream STBC transmit enabled
>>> ath0: [HT] LDPC transmit/receive enabled
>>> ath0: [HT] 2 RX streams; 2 TX streams
>>> ath0: AR9580 mac 448.4 RF5110 phy 0.0
>>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
>>>
>>> _______________________________________________
>>> freebsd-questions@freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>> To unsubscribe, send any mail to
>>> "freebsd-questions-unsubscribe@freebsd.org"
>
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.o=
rg"



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?CAJ-VmokH2eCX-AnaKTjQDY-2Wgam7qvEsXrPjXxPteCJu7VVWw>