Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 21 Dec 2006 19:04:17 +0100
From:      Palle Girgensohn <girgen@FreeBSD.org>
To:        Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp>
Cc:        questions@FreeBSD.org, obrien@FreeBSD.org
Subject:   Re: if_nfe on nVidia chipset
Message-ID:  <EF346C8630188DB1EC227A78@rambutan.pingpong.net>
In-Reply-To: <458956C6.6080004@se.hiroshima-u.ac.jp>
References:  <92F17ADAEC575CF1EDBE870C@rambutan.pingpong.net> <45841980.5090100@se.hiroshima-u.ac.jp> <06DA4ABFFA1F59DF90AE0285@rambutan.pingpong.net> <458956C6.6080004@se.hiroshima-u.ac.jp>

next in thread | previous in thread | raw e-mail | index | archive | help


--On torsdag, december 21, 2006 00.29.10 +0900 Shigeaki Tagashira=20
<shigeaki@se.hiroshima-u.ac.jp> wrote:

> Palle Girgensohn wrote:
>> --On s=F6ndag, december 17, 2006 01.06.24 +0900 Shigeaki Tagashira
>> <shigeaki@se.hiroshima-u.ac.jp> wrote:
>>
>>> I have the same one. And if_nfe works well on it, in both FreeBSD
>>> 6.2-PRERELEASE and 7-CURRENT. Please try to initialize if_nfe using
>>> ifconfig command;
>>> # ifconfig nfe1 down; ifconfig nfe1 up
>>>
>>> ---
>>> S. Tagashira
>>
>> Hi Tagashira-san,
>>
>> Tried a lot of stuff, up and down and also "debug" flag, but nothing
>> helps.
>>
>> ifconfig says "media: Ethernet autoselect (none)"
>>
>> I can ping the interface itself, but nothing else.
>>
>> Any ideas?
>
> Hi,
> I updated my web site for FreeBSD nfe driver.
> Please try the lastest nfe driver and e1000phy patch provided on the web
> site. These codes were modified to detect link media more correctly.


Hello,

Sorry, there's no change, it still acts the same way.

media: Ethernet autoselect (none)
status: active

and the network does not work. No mediaopts work.

Regards,
Palle


>
> ---
> S. Tagashira
>
>
>
>>
>> Regards,
>> Palle
>>
>>
>>
>>
>>>
>>> Palle Girgensohn wrote:
>>>> Hi! Sorry for the cross post, I'd love to know if I can get this
>>>> working or not.
>>>>
>>>> Regards,
>>>> Palle
>>>>
>>>> ---------- Forwarded Message ----------
>>>> Date: tisdag, december 12, 2006 18.52.35 +0100
>>>> From: Palle Girgensohn <girgen@FreeBSD.org>
>>>> To: hardware@freebsd.org
>>>> Subject: if_nfe on Asus M2N-SLI deluxe?
>>>>
>>>> Hi!
>>>>
>>>> Does anybody know if if_nfe should work on the above motherboard? I
>>>> snached the patch for FreeBSD-6.2 from
>>>> <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>;
>>>> and
>>>> tried it. The kernel and ifconfig seems happy, but it does not work;
>>>> ifconfig reports "active" but ifconfig reports:
>>>>
>>>> nfe0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>>>>        options=3D1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>>>>        ether 00:17:31:86:aa:31
>>>>        media: Ethernet autoselect (none)
>>>>        status: no carrier
>>>> nfe1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>>>>        options=3D1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>>>>        inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4
>>>> inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255
>>>>        ether 00:17:31:86:b4:c6
>>>>        media: Ethernet autoselect (none)
>>>>        status: active
>>>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>>>>        inet6 ::1 prefixlen 128        inet6 fe80::1%lo0 prefixlen 64
>>>> scopeid 0x5        inet 127.0.0.1 netmask 0xff000000
>>>> The media part of nfe1 looks bad, eh?
>>>>
>>>> Is it supposed to work? How can I help to get it working?
>>>>
>>>> FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else
>>>> needed?
>>>>
>>>> /Palle
>>>>
>>>>
>>>>
>>>> ---------- End Forwarded Message ----------
>>>>
>>>>
>>>>
>>>>
>>>> ----------------------------------------------------------------------
>>>> --
>>>>
>>>> Subject:
>>>> if_nfe on Asus M2N-SLI deluxe?
>>>> From:
>>>> Palle Girgensohn <girgen@FreeBSD.org>
>>>> Date:
>>>> Tue, 12 Dec 2006 18:52:35 +0100
>>>> To:
>>>> hardware@freebsd.org
>>>>
>>>> To:
>>>> hardware@freebsd.org
>>>> CC:
>>>> obrien@freebsd.org
>>>>
>>>>
>>>> Hi!
>>>>
>>>> Does anybody know if if_nfe should work on the above motherboard? I
>>>> snached the patch for FreeBSD-6.2 from
>>>> <http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>;
>>>> and
>>>> tried it. The kernel and ifconfig seems happy, but it does not work;
>>>> ifconfig reports "active" but ifconfig reports:
>>>>
>>>> nfe0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>>>>        options=3D1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>>>>        ether 00:17:31:86:aa:31
>>>>        media: Ethernet autoselect (none)
>>>>        status: no carrier
>>>> nfe1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>>>>        options=3D1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>>>>        inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid
>>>> 0x4       inet 192.168.1.191 netmask 0xffffff00 broadcast =
192.168.1.255
>>>>        ether 00:17:31:86:b4:c6
>>>>        media: Ethernet autoselect (none)
>>>>        status: active
>>>> lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>>>>        inet6 ::1 prefixlen 128       inet6 fe80::1%lo0 prefixlen 64
>>>> scopeid 0x5       inet 127.0.0.1 netmask 0xff000000
>>>> The media part of nfe1 looks bad, eh?
>>>>
>>>> Is it supposed to work? How can I help to get it working?
>>>>
>>>> FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else
>>>> needed?
>>>>
>>>> /Palle
>>>>
>>>>
>>>>
>>>> ----------------------------------------------------------------------
>>>> --
>>>>
>>>> Copyright (c) 1992-2006 The FreeBSD Project.
>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
>>>> 1994 The Regents of the University of California. All rights reserved.
>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>>> FreeBSD 6.2-PRERELEASE #0: Wed Nov 29 11:57:06 CET 2006
>>>>     girgen@rambutan.pingpong.net:/usr/obj/.a/banan/usr/src/sys/WORKSTA
>>>>     TI ON Timecounter "i8254" frequency 1193182 Hz quality 0
>>>> CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz 686-class CPU)
>>>>   Origin =3D "AuthenticAMD"  Id =3D 0x40ff2  Stepping =3D 2
>>>>   =
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,
>>>>   PG E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>>>>   Features2=3D0x2001<SSE3,CX16>
>>>>   AMD =
Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
>>>>   AMD Features2=3D0x1d<LAHF,<b2>,<b3>,CR8>
>>>> real memory  =3D 2146369536 (2046 MB)
>>>> avail memory =3D 2091245568 (1994 MB)
>>>> ACPI APIC Table: <Nvidia AWRDACPI>
>>>> ioapic0 <Version 1.1> irqs 0-23 on motherboard
>>>> acpi0: <Nvidia AWRDACPI> on motherboard
>>>> acpi_bus_number: can't get _ADR
>>>> acpi_bus_number: can't get _ADR
>>>> acpi_bus_number: can't get _ADR
>>>> acpi_bus_number: can't get _ADR
>>>> acpi0: Power Button (fixed)
>>>> acpi_bus_number: can't get _ADR
>>>> acpi_bus_number: can't get _ADR
>>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>>>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>>>> cpu0: <ACPI CPU> on acpi0
>>>> acpi_button0: <Power Button> on acpi0
>>>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>>>> pci0: <ACPI PCI bus> on pcib0
>>>> pci0: <memory, RAM> at device 0.0 (no driver attached)
>>>> isab0: <PCI-ISA bridge> at device 1.0 on pci0
>>>> isa0: <ISA bus> on isab0
>>>> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
>>>> pci0: <memory, RAM> at device 1.2 (no driver attached)
>>>> ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq =
21
>>>> at device 2.0 on pci0 ohci0: [GIANT-LOCKED]
>>>> usb0: OHCI version 1.0, legacy support
>>>> usb0: SMM does not respond, resetting
>>>> usb0: <OHCI (generic) USB controller> on ohci0
>>>> usb0: USB revision 1.0
>>>> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>>> uhub0: 10 ports with 10 removable, self powered
>>>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff
>>>> irq 22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED]
>>>> usb1: EHCI version 1.0
>>>> usb1: companion controller, 10 ports each: usb0
>>>> usb1: <EHCI (generic) USB 2.0 controller> on ehci0
>>>> usb1: USB revision 2.0
>>>> uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>>>> uhub1: 10 ports with 10 removable, self powered
>>>> atapci0: <nVidia nForce MCP55 UDMA133 controller> port
>>>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on =
pci0
>>>> ata0: <ATA channel 0> on atapci0
>>>> ata1: <ATA channel 1> on atapci0
>>>> atapci1: <nVidia nForce MCP55 SATA300 controller> port
>>>> 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem
>>>> 0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0 ata2: <ATA channel
>>>> 0> on atapci1
>>>> ata3: <ATA channel 1> on atapci1
>>>> atapci2: <nVidia nForce MCP55 SATA300 controller> port
>>>> 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem
>>>> 0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0 ata4: <ATA channel
>>>> 0> on atapci2
>>>> ata5: <ATA channel 1> on atapci2
>>>> atapci3: <nVidia nForce MCP55 SATA300 controller> port
>>>> 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f
>>>> mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0 ata6: <ATA
>>>> channel 0> on atapci3
>>>> ata7: <ATA channel 1> on atapci3
>>>> pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>>>> pci1: <ACPI PCI bus> on pcib1
>>>> fxp0: <Intel 82558 Pro/100 Ethernet> port 0xac00-0xac1f mem
>>>> 0xfdeff000-0xfdefffff,0xfdc00000-0xfdcfffff irq 16 at device 6.0 on
>>>> pci1 miibus0: <MII bus> on fxp0
>>>> inphy0: <i82555 10/100 media interface> on miibus0
>>>> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>>>> fxp0: Ethernet address: 00:a0:c9:ce:11:26
>>>> fwohci0: <Texas Instruments TSB43AB22/A> mem
>>>> 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 19 at device 11.0 on
>>>> pci1
>>>> fwohci0: OHCI version 1.10 (ROM=3D1)
>>>> fwohci0: No. of Isochronous channels is 4.
>>>> fwohci0: EUI64 00:11:d8:00:00:c8:2b:85
>>>> fwohci0: Phy 1394a available S400, 2 ports.
>>>> fwohci0: Link S400, max_rec 2048 bytes.
>>>> firewire0: <IEEE1394(FireWire) bus> on fwohci0
>>>> fwe0: <Ethernet over FireWire> on firewire0
>>>> if_fwe0: Fake Ethernet address: 02:11:d8:c8:2b:85
>>>> fwe0: Ethernet address: 02:11:d8:c8:2b:85
>>>> fwe0: if_start running deferred for Giant
>>>> sbp0: <SBP-2/SCSI over FireWire> on firewire0
>>>> fwohci0: Initiate bus reset
>>>> fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
>>>> firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
>>>> firewire0: bus manager 0 (me)
>>>> pci0: <multimedia> at device 6.1 (no driver attached)
>>>> nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem
>>>> 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq
>>>> 23 at device 8.0 on pci0 miibus1: <MII bus> on nfe0
>>>> e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus1
>>>> e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>>>> 1000baseTX-FDX, auto nfe0: Ethernet address: 00:17:31:86:aa:31
>>>> nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem
>>>> 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq
>>>> 20 at device 9.0 on pci0 miibus2: <MII bus> on nfe1
>>>> e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus2
>>>> e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
>>>> 1000baseTX-FDX, auto nfe1: Ethernet address: 00:17:31:86:b4:c6
>>>> pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
>>>> pci2: <ACPI PCI bus> on pcib2
>>>> pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
>>>> pci3: <ACPI PCI bus> on pcib3
>>>> pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
>>>> pci4: <ACPI PCI bus> on pcib4
>>>> pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
>>>> pci5: <ACPI PCI bus> on pcib5
>>>> pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
>>>> pci6: <ACPI PCI bus> on pcib6
>>>> atapci4: <JMicron JMB363 SATA300 controller> port
>>>> 0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8c00-0x8c0f
>>>> mem 0xfdafe000-0xfdafffff irq 16 at device 0.0 on pci6 atapci4: AHCI
>>>> Version 01.00 controller with 2 ports detected
>>>> ata8: <ATA channel 0> on atapci4
>>>> ata9: <ATA channel 1> on atapci4
>>>> ata10: <ATA channel 2> on atapci4
>>>> pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
>>>> pci7: <ACPI PCI bus> on pcib7
>>>> nvidia0: <GeForce 6200 TurboCache(TM)> mem
>>>> 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq
>>>> 16 at device 0.0 on pci7 nvidia0: [GIANT-LOCKED]
>>>> acpi_tz0: <Thermal Zone> on acpi0
>>>> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
>>>> acpi0 fdc0: [FAST]
>>>> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 =
on
>>>> acpi0 sio0: type 16550A
>>>> ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
>>>> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
>>>> ppbus0: <Parallel port bus> on ppc0
>>>> ppi0: <Parallel I/O> on ppbus0
>>>> lpt0: <Printer> on ppbus0
>>>> lpt0: Interrupt-driven port
>>>> pmtimer0 on isa0
>>>> orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd67ff on
>>>> isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>>>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>>>> kbd0 at atkbd0
>>>> atkbd0: [GIANT-LOCKED]
>>>> sc0: <System console> at flags 0x100 on isa0
>>>> sc0: VGA <16 virtual consoles, flags=3D0x300>
>>>> sio1: configured irq 3 not in bitmap of probed irqs 0
>>>> sio1: port may not be enabled
>>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
>>>> isa0
>>>> ukbd0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass
>>>> 3/1
>>>> kbd1 at ukbd0
>>>> uhid0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass
>>>> 3/1
>>>> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass
>>>> 3/1
>>>> ums0: 6 buttons and Z dir.
>>>> Timecounter "TSC" frequency 2210201999 Hz quality 800
>>>> Timecounters tick every 0.801 msec
>>>> ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
>>>> disabled, default to accept, logging disabled ad0: 152627MB <Seagate
>>>> ST3160212A 3.AAJ> at ata0-master UDMA100 acd0: DVDR <Optiarc DVD RW
>>>> AD-5170A/1.11> at ata0-slave UDMA66
>>>> cd0 at ata0 bus 0 target 1 lun 0
>>>> cd0: <Optiarc DVD RW AD-5170A 1.11> Removable CD-ROM SCSI-0 device
>>>> cd0: 66.000MB/s transfers
>>>> cd0: Attempt to query device size failed: NOT READY, Medium not =
present
>>>> Trying to mount root from ufs:/dev/ad0s1a
>>>>
>>>>
>>>> ----------------------------------------------------------------------
>>>> --
>>>>
>>>> _______________________________________________
>>>> freebsd-hardware@freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
>>>> To unsubscribe, send any mail to
>>>> "freebsd-hardware-unsubscribe@freebsd.org"
>>
>>
>>
>>







Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EF346C8630188DB1EC227A78>