Date: Thu, 29 Jan 2009 00:17:38 -0800 (PST) From: Kirill Yelizarov <ykirill@yahoo.com> To: freebsd-x11@freebsd.org Subject: Re: Problems with hardware rendering on i865 Message-ID: <116536.11364.qm@web58702.mail.re1.yahoo.com>
next in thread | raw e-mail | index | archive | help
Robert,
I tried tiling off but got another error:
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "DRI" "true"
(**) intel(0): Option "Tiling" "off"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
(--) intel(0): Chipset: "865G"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFFA80000
(**) intel(0): Using EXA for acceleration
(II) intel(0): 1 display pipe available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Sony
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/local/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/local/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/local/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/local/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
....
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/local/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 241152 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 964608 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x2
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling disabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with untiled buffers.
(WW) intel(0): Failed to allocate texture space.
(II) intel(0): Untiled allocation failed.
(II) intel(0): Couldn't allocate 3D memory, disabling DRI.
(II) intel(0): Attempting memory allocation with untiled buffers.
(II) intel(0): Untiled allocation successful.
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(II) EXA(0): Offscreen pixmap area of 50135040 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 19 at 0x00fdf000 (pgoffset 4063)
(II) intel(0): xf86BindGARTMemory: bind key 20 at 0x00fe0000 (pgoffset 4064)
(II) intel(0): xf86BindGARTMemory: bind key 21 at 0x01fd0000 (pgoffset 8144)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00024fff: HW cursors (20 kB)
(II) intel(0): 0x00025000-0x0002cfff: logical 3D context (32 kB)
(II) intel(0): 0x0002d000-0x0012cfff: fake bufmgr (1024 kB)
(II) intel(0): 0x00fdf000: end of stolen memory
(II) intel(0): 0x00fdf000-0x00fdffff: overlay registers (4 kB, 0x0000000011be9000 physical
)
(II) intel(0): 0x00fe0000-0x01fcffff: front buffer (16320 kB)
(II) intel(0): 0x01fd0000-0x04f9ffff: exa offscreen (48960 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(EE) AIGLX error: Calling driver entry point failed(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 359 x 287
(II) config/hal: Adding input device AT Keyboard
(II) LoadModule: "kbd"
Regards,
Kirill
--- On Wed, 1/28/09, Robert Noland <rnoland@FreeBSD.org> wrote:
> From: Robert Noland <rnoland@FreeBSD.org>
> Subject: Re: Problems with hardware rendering on i865
> To: ykirill@yahoo.com
> Cc: freebsd-x11@freebsd.org
> Date: Wednesday, January 28, 2009, 7:09 PM
> On Wed, 2009-01-28 at 06:33 -0800, Kirill Yelizarov wrote:
> > Hi
> >
> > I have problems with hardware rendering configuration.
> I have all recent updates of Releng-7 and ports (xorg-7.4).
> glxgears shows about 28fps when full screen. How can i
> enable hardware rendering or i'm just wasting my time
> with this card? Any hints?
> >
> > Thank You,
> > Kirill
> >
> > P.S. Sorry, this letter is big
> >
> > Here is dmesg:
> > Copyright (c) 1992-2009 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
> 1991, 1992, 1993, 1994
> > The Regents of the University of California. All
> rights reserved.
> > FreeBSD is a registered trademark of The FreeBSD
> Foundation.
> > FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 MSK 2009
> > root@mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV
> > Timecounter "i8254" frequency 1193182 Hz
> quality 0
> > CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz
> 686-class CPU)
> > Origin = "GenuineIntel" Id = 0xf41
> Stepping = 1
> >
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> >
> Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
> > Logical CPUs per core: 2
> > real memory = 1056108544 (1007 MB)
> > avail memory = 1023971328 (976 MB)
> > ACPI APIC Table: <INTEL D865GVHZ>
> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> > cpu0 (BSP): APIC ID: 0
> > cpu1 (AP): APIC ID: 1
> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > netsmb_dev: loaded
> > kbd1 at kbdmux0
> > acpi0: <INTEL D865GVHZ> on motherboard
> > acpi0: [ITHREAD]
> > acpi0: Power Button (fixed)
> > acpi0: reservation of 0, a0000 (3) failed
> > acpi0: reservation of 100000, 3ef00000 (3) failed
> > Timecounter "ACPI-fast" frequency 3579545 Hz
> quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port
> 0x408-0x40b on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff
> on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > vgapci0: <VGA-compatible display> port
> 0xec00-0xec07 mem
> 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 16 at device
> 2.0 on pci0
> > agp0: <Intel 82865G (865G GMCH) SVGA controller>
> on vgapci0
> > agp0: detected 16252k stolen memory
> > agp0: aperture size is 128M
> > drm0: <Intel i865G GMCH> on vgapci0
> > vgapci0: child drm0 requested pci_enable_busmaster
> > info: [drm] AGP at 0xf0000000 128MB
> > info: [drm] Initialized i915 1.6.0 20080730
> > ... I removed the rest of dmesg to save space
> >
> > My xorg.conf:
> > Section "Module"
> > Load "dbe" # Double buffer extension
> > Load "GLcore"
> > Load "freetype"
> > Load "glx"
> > Load "dri"
> > EndSection
> >
> > Section "Files"
> >
> FontPath "/usr/local/lib/X11/fonts/winfonts/"
> >
> FontPath "/usr/local/lib/X11/fonts/koi8-1/misc/"
> >
> FontPath "/usr/local/lib/X11/fonts/koi8-1/75dpi/"
> > FontPath "/usr/local/lib/X11/fonts/misc/"
> > FontPath "/usr/local/lib/X11/fonts/URW/"
> > EndSection
> >
> > Section "ServerFlags"
> >
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Sony"
> > HorizSync 31.5 - 85.0
> > VertRefresh 50-70
> > Option "DPMS" "true"
> > EndSection
> >
> > Section "Device"
> > Identifier "I865"
> > Driver "intel"
> > VendorName "Intel Corporation"
> > Option "DRI" "true"
> > # Option "AccelMethod" "NONE"
> > Option "AccelMethod" "EXA"
> > Option "MigrationHeuristic"
> "greedy"
> > Option "ExaNoComposite" "false"
> > EndSection
> >
> > Section "Screen"
> > Identifier "LCD_Screen"
> > Device "I865"
> > Monitor "Sony"
> > DefaultDepth 24
> >
> > Subsection "Display"
> > Depth 24
> > Modes "1280x1024"
> > ViewPort 0 0
> > Virtual 2040 2040
> > EndSubsection
> > EndSection
> >
> > Section "ServerLayout"
> > Identifier "Simple Layout"
> > Option "AIGLX" "true"
> > Screen "LCD_Screen"
> > EndSection
> >
> > Section "DRI"
> > Group 0
> > Mode 0666
> > EndSection
> >
> > Section "Extensions"
> > Option "Composite" "Enable"
> > Option "RENDER" "Enable"
> > Option "DAMAGE" "Enable"
> > EndSection
> >
> >
> > And here is Xorg log:
> > X.Org X Server 1.5.3
> > Release Date: 5 November 2008
> > X Protocol Version 11, Revision 0
> > Build Operating System: FreeBSD 7.1-STABLE i386
> > Current Operating System: FreeBSD mysrv.faberlic.com
> 7.1-STABLE FreeBSD 7.1-STABLE #0: Wed Jan 28 16:46:24 MSK
> 2009 root@mysrv.faberlic.com:/usr/obj/usr/src/sys/MYSRV
> i386
> > Build Date: 28 January 2009 12:25:29PM
> >
> > Before reporting problems, check http://wiki.x.org
> > to make sure that you have the latest version.
> > Markers: (--) probed, (**) from config file, (==)
> default setting,
> > (++) from command line, (!!) notice, (II)
> informational,
> > (WW) warning, (EE) error, (NI) not implemented, (??)
> unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time:
> Wed Jan 28 17:04:03 2009
> > (==) Using config file: "/etc/X11/xorg.conf"
> > (==) ServerLayout "Simple Layout"
> > (**) |-->Screen "LCD_Screen" (0)
> > (**) | |-->Monitor "Sony"
> > (**) | |-->Device "I865"
> > (**) Option "AIGLX" "true"
> > (==) Automatically adding devices
> > (==) Automatically enabling devices
> > (==) Including the default font path
> /usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/.
> > (**) FontPath set to:
> > /usr/local/lib/X11/fonts/winfonts/,
> > /usr/local/lib/X11/fonts/koi8-1/misc/,
> > /usr/local/lib/X11/fonts/koi8-1/75dpi/,
> > /usr/local/lib/X11/fonts/misc/,
> > /usr/local/lib/X11/fonts/URW/,
> > /usr/local/lib/X11/fonts/misc/,
> > /usr/local/lib/X11/fonts/TTF/,
> > /usr/local/lib/X11/fonts/OTF,
> > /usr/local/lib/X11/fonts/Type1/,
> > /usr/local/lib/X11/fonts/100dpi/,
> > /usr/local/lib/X11/fonts/75dpi/
> > (==) ModulePath set to
> "/usr/local/lib/xorg/modules"
> > (**) Extension "Composite" is enabled
> > (**) Extension "RENDER" is enabled
> > (**) Extension "DAMAGE" is enabled
> > (II) Cannot locate a core pointer device.
> > (II) Cannot locate a core keyboard device.
> > (II) The server relies on HAL to provide the list of
> input devices.
> > If no devices become available, reconfigure HAL or
> disable AllowEmptyInput.
> > (II) Loader magic: 0x81ab3c0
> > (II) Module ABI versions:
> > X.Org ANSI C Emulation: 0.4
> > X.Org Video Driver: 4.1
> > X.Org XInput driver : 2.1
> > X.Org Server Extension : 1.1
> > X.Org Font Renderer : 0.6
> > (II) Loader running on freebsd
> > (--) Using syscons driver with X support (version 2.0)
> > (--) using VT number 9
> >
> > (--) PCI:*(0@0:2:0) Intel Corporation 82865G
> Integrated Graphics Controller rev 0, Mem @ 0xf0000000/0,
> 0xffa80000/0, I/O @ 0x0000ec00/0, BIOS @ 0x????????/65536
> > (II) System resource ranges:
> > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > (II) "extmod" will be loaded by default.
> > (II) "dbe" will be loaded. This was enabled
> by default and also specified in the config file.
> > (II) "glx" will be loaded. This was enabled
> by default and also specified in the config file.
> > (II) "freetype" will be loaded. This was
> enabled by default and also specified in the config file.
> > (II) "record" will be loaded by default.
> > (II) "dri" will be loaded. This was enabled
> by default and also specified in the config file.
> > (II) LoadModule: "dbe"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/extensions//libdbe.so
> > (II) Module dbe: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > Module class: X.Org Server Extension
> > ABI class: X.Org Server Extension, version 1.1
> > (II) Loading extension DOUBLE-BUFFER
> > (II) LoadModule: "freetype"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/fonts//libfreetype.so
> > (II) Module freetype: vendor="X.Org Foundation
> & the After X-TT Project"
> > compiled for 1.5.3, module version = 2.1.0
> > Module class: X.Org Font Renderer
> > ABI class: X.Org Font Renderer, version 0.6
> > (II) Loading font FreeType
> > (II) LoadModule: "glx"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/extensions//libglx.so
> > (II) Module glx: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > ABI class: X.Org Server Extension, version 1.1
> > (**) AIGLX enabled
> > (**) Exporting typical set of GLX visuals
> > (II) Loading extension GLX
> > (II) LoadModule: "dri"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/extensions//libdri.so
> > (II) Module dri: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > ABI class: X.Org Server Extension, version 1.1
> > (II) Loading extension XFree86-DRI
> > (II) LoadModule: "extmod"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/extensions//libextmod.so
> > (II) Module extmod: vendor="X.Org
> Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > Module class: X.Org Server Extension
> > ABI class: X.Org Server Extension, version 1.1
> > (II) Loading extension SHAPE
> > (II) Loading extension MIT-SUNDRY-NONSTANDARD
> > (II) Loading extension BIG-REQUESTS
> > (II) Loading extension SYNC
> > (II) Loading extension MIT-SCREEN-SAVER
> > (II) Loading extension XC-MISC
> > (II) Loading extension XFree86-VidModeExtension
> > (II) Loading extension XFree86-Misc
> > (II) Loading extension XFree86-DGA
> > (II) Loading extension DPMS
> > (II) Loading extension TOG-CUP
> > (II) Loading extension Extended-Visual-Information
> > (II) Loading extension XVideo
> > (II) Loading extension XVideo-MotionCompensation
> > (II) Loading extension X-Resource
> > (II) LoadModule: "record"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/extensions//librecord.so
> > (II) Module record: vendor="X.Org
> Foundation"
> > compiled for 1.5.3, module version = 1.13.0
> > Module class: X.Org Server Extension
> > ABI class: X.Org Server Extension, version 1.1
> > (II) Loading extension RECORD
> > (II) LoadModule: "intel"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > (II) Module intel: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 2.5.1
> > Module class: X.Org Video Driver
> > ABI class: X.Org Video Driver, version 4.1
> > (II) intel: Driver for Intel Integrated Graphics
> Chipsets: i810,
> > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM,
> 865G, 915G,
> > E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35,
> 965Q, 946GZ,
> > 965GM, 965GME/GLE, G33, Q35, Q33,
> > Mobile Intel\u00ae GM45 Express Chipset,
> > Intel Integrated Graphics Device, G45/G43, Q45/Q43,
> G41
> > (II) Primary Device is: PCI 00@00:02:0
> > (II) resource ranges after xf86ClaimFixedResources()
> call:
> > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > (II) resource ranges after probing:
> > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> > [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> > (II) Loading sub module "vgahw"
> > (II) LoadModule: "vgahw"
> >
> > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> > (II) Module vgahw: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 0.1.0
> > ABI class: X.Org Video Driver, version 4.1
> > (**) intel(0): Depth 24, (--) framebuffer bpp 32
> > (==) intel(0): RGB weight 888
> > (==) intel(0): Default visual is TrueColor
> > (**) intel(0): Option "AccelMethod"
> "EXA"
> > (**) intel(0): Option "DRI" "true"
> > (II) intel(0): Integrated Graphics Chipset: Intel(R)
> 865G
> > (--) intel(0): Chipset: "865G"
> > (--) intel(0): Linear framebuffer at 0xF0000000
> > (--) intel(0): IO registers at addr 0xFFA80000
> > (**) intel(0): Using EXA for acceleration
> > (II) intel(0): 1 display pipe available.
> > (II) Loading sub module "ddc"
> > (II) LoadModule: "ddc"
> > (II) Module "ddc" already built-in
> > (II) Loading sub module "i2c"
> > (II) LoadModule: "i2c"
> > (II) Module "i2c" already built-in
> > (II) intel(0): Output VGA using monitor section Sony
> > (II) intel(0): I2C bus "DVODDC_D"
> initialized.
> > (II) Loading sub module "sil164"
> > (II) LoadModule: "sil164"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/drivers//sil164.so
> > (II) Module sil164: vendor="X.Org
> Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > ABI class: X.Org Video Driver, version 4.1
> > (II) intel(0): I2C bus "DVOI2C_E"
> initialized.
> > (II) Loading sub module "ch7xxx"
> > (II) LoadModule: "ch7xxx"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/drivers//ch7xxx.so
> > (II) Module ch7xxx: vendor="X.Org
> Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > ABI class: X.Org Video Driver, version 4.1
> > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > (II) intel(0): I2C bus "DVOI2C_E"
> initialized.
> > (II) Loading sub module "ivch"
> > (II) LoadModule: "ivch"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/drivers//ivch.so
> > (II) Module ivch: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > ABI class: X.Org Video Driver, version 4.1
> > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > (II) intel(0): I2C bus "DVOI2C_B"
> initialized.
> > (II) Loading sub module "tfp410"
> > (II) LoadModule: "tfp410"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/drivers//tfp410.so
> > (II) Module tfp410: vendor="X.Org
> Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > ABI class: X.Org Video Driver, version 4.1
> > (II) intel(0): I2C bus "DVOI2C_B" removed.
> > (II) intel(0): I2C bus "DVOI2C_E"
> initialized.
> > (II) Loading sub module "ch7017"
> > (II) LoadModule: "ch7017"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/drivers//ch7017.so
> > (II) Module ch7017: vendor="X.Org
> Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > ABI class: X.Org Video Driver, version 4.1
> > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > (II) intel(0): I2C bus "DVOI2C_E"
> initialized.
> > (II) intel(0): I2C bus "DVOI2C_E" removed.
> > (II) intel(0): I2C bus "DVODDC_D" removed.
> > (==) intel(0): Write-combining range (0xa0000,0x10000)
> was already clear
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> registered at address 0xA0.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> removed.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): Using hsync ranges from config file
> > (II) intel(0): Using vrefresh ranges from config file
> > (II) intel(0): Printing DDC gathered Modelines:
> > (II) intel(0): Modeline "1280x1024"x0.0
> 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (64.0 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> kHz)
> > (II) intel(0): Modeline "720x400"x0.0
> 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> kHz)
> > (II) intel(0): Modeline "1280x1024"x0.0
> 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (80.0 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (60.1 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (56.5 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (48.4 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> kHz)
> > (II) intel(0): Modeline "1280x1024"x60.0
> 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> +vsync (63.6 kHz)
> > (II) intel(0): Modeline "1280x960"x60.0
> 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> (59.6 kHz)
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): Output VGA connected
> > (II) intel(0): Using user preference for initial modes
> > (II) intel(0): Output VGA using initial mode 1280x1024
> > (==) intel(0): Write-combining range (0xa0000,0x10000)
> was already clear
> > (II) intel(0): detected 128 kB GTT.
> > (II) intel(0): detected 16252 kB stolen memory.
> > (==) intel(0): video overlay key set to 0x101fe
> > (==) intel(0): Intel XvMC decoder disabled
> > (==) intel(0): Will not try to enable page flipping
> > (==) intel(0): Triple buffering disabled
> > (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
> > (**) intel(0): Display dimensions: (340, 270) mm
> > (**) intel(0): DPI set to (152, 191)
> > (II) Loading sub module "fb"
> > (II) LoadModule: "fb"
> >
> > (II) Loading /usr/local/lib/xorg/modules//libfb.so
> > (II) Module fb: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 1.0.0
> > ABI class: X.Org ANSI C Emulation, version 0.4
> > (II) Loading sub module "exa"
> > (II) LoadModule: "exa"
> >
> > (II) Loading /usr/local/lib/xorg/modules//libexa.so
> > (II) Module exa: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 2.4.0
> > ABI class: X.Org Video Driver, version 4.1
> > (II) Loading sub module "ramdac"
> > (II) LoadModule: "ramdac"
> > (II) Module "ramdac" already built-in
> > (II) intel(0): Comparing regs from server start up to
> After PreInit
> > (II) Loading sub module "dri"
> > (II) LoadModule: "dri"
> >
> > (II) Reloading
> /usr/local/lib/xorg/modules/extensions//libdri.so
> > (==) Depth 24 pixmap format is 32 bpp
> > (II) do I need RAC? No, I don't.
> > (II) resource ranges after preInit:
> > [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> MX[B]E(B)
> > [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> > [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> > [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> > [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> > [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> > (II) intel(0): Kernel reported 241152 total, 0 used
> > (II) intel(0): I830CheckAvailableMemory: 964608 kB
> available
> > drmOpenDevice: node name is /dev/dri/card0
> > drmOpenDevice: open result is 10, (OK)
> > drmOpenDevice: node name is /dev/dri/card0
> > drmOpenDevice: open result is 10, (OK)
> > drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> > drmOpenDevice: node name is /dev/dri/card0
> > drmOpenDevice: open result is 10, (OK)
> > drmOpenByBusid: drmOpenMinor returns 10
> > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> > (II) [drm] DRM interface version 1.2
> > (II) [drm] DRM open master succeeded.
> > (II) intel(0): [drm] Using the DRM lock SAREA also for
> drawables.
> > (II) intel(0): [drm] framebuffer mapped by ddx driver
> > (II) intel(0): [drm] added 1 reserved context for
> kernel
> > (II) intel(0): X context handle = 0x1
> > (II) intel(0): [drm] installed DRM signal handler
> > (**) intel(0): Framebuffer compression disabled
> > (**) intel(0): Tiling enabled
> > (==) intel(0): VideoRam: 131072 KB
> > (II) intel(0): Attempting memory allocation with tiled
> buffers.
> > (WW) intel(0): Failed to allocate texture space.
> > (II) intel(0): Tiled allocation failed.
> > (II) intel(0): Attempting memory allocation with
> untiled buffers.
> > (WW) intel(0): Failed to allocate texture space.
> > (II) intel(0): Untiled allocation failed.
> > (II) intel(0): Couldn't allocate 3D memory,
> disabling DRI.
> > (II) intel(0): Attempting memory allocation with
> untiled buffers.
> > (II) intel(0): Untiled allocation successful.
>
> There is some problem on 855 class hardware with agp/drm
> and tiled
> buffers. I need to get a debugging build of agp to see if
> I can figure
> out what is going on. Try disabling tiled buffers and see
> if that
> helps. Option "Tiling" "off" in the
> Device section.
>
> robert.
>
> > (II) intel(0): Page Flipping disabled
> > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is
> 0x03d0, hwp->PIOOffset is 0x0000
> > (==) intel(0): Write-combining range (0xa0000,0x10000)
> was already clear
> > (**) intel(0): Option "MigrationHeuristic"
> "greedy"
> > (**) intel(0): Option "EXANoComposite"
> "false"
> > (II) EXA(0): Offscreen pixmap area of 50135040 bytes
> > (II) EXA(0): Driver registered support for the
> following operations:
> > (II) Solid
> > (II) Copy
> > (II) Composite (RENDER acceleration)
> > (==) intel(0): Backing store disabled
> > (==) intel(0): Silken mouse enabled
> > (II) intel(0): Initializing HW Cursor
> > (II) intel(0): xf86BindGARTMemory: bind key 11 at
> 0x00fdf000 (pgoffset 4063)
> > (II) intel(0): xf86BindGARTMemory: bind key 12 at
> 0x00fe0000 (pgoffset 4064)
> > (II) intel(0): xf86BindGARTMemory: bind key 13 at
> 0x01fd0000 (pgoffset 8144)
> > (II) intel(0): Fixed memory allocation layout:
> > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128
> kB)
> > (II) intel(0): 0x00020000-0x00024fff: HW cursors (20
> kB)
> > (II) intel(0): 0x00025000-0x0002cfff: logical 3D
> context (32 kB)
> > (II) intel(0): 0x0002d000-0x0012cfff: fake bufmgr
> (1024 kB)
> > (II) intel(0): 0x00fdf000: end of stolen
> memory
> > (II) intel(0): 0x00fdf000-0x00fdffff: overlay
> registers (4 kB, 0x000000000823b000 physical
> > )
> > (II) intel(0): 0x00fe0000-0x01fcffff: front buffer
> (16320 kB)
> > (II) intel(0): 0x01fd0000-0x04f9ffff: exa offscreen
> (48960 kB)
> > (II) intel(0): 0x08000000: end of aperture
> > (II) intel(0): Output configuration:
> > (II) intel(0): Pipe A is on
> > (II) intel(0): Display plane A is now enabled and
> connected to pipe A.
> > (II) intel(0): Output VGA is connected to pipe A
> > (II) intel(0): RandR 1.2 enabled, ignore the following
> RandR disabled message.
> > (**) Option "dpms" "true"
> > (**) intel(0): DPMS enabled
> > (II) intel(0): Set up overlay video
> > (II) intel(0): direct rendering: Failed
> > (--) RandR disabled
> > (II) Initializing built-in extension MIT-SHM
> > (II) Initializing built-in extension XInputExtension
> > (II) Initializing built-in extension XTEST
> > (II) Initializing built-in extension XKEYBOARD
> > (II) Initializing built-in extension XINERAMA
> > (II) Initializing built-in extension XFIXES
> > (II) Initializing built-in extension RENDER
> > (II) Initializing built-in extension RANDR
> > (II) Initializing built-in extension COMPOSITE
> > (II) Initializing built-in extension DAMAGE
> > (II) Initializing built-in extension XEVIE
> > drmOpenDevice: node name is /dev/dri/card0
> > drmOpenDevice: open result is 11, (OK)
> > drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> > drmOpenDevice: node name is /dev/dri/card0
> > drmOpenDevice: open result is 11, (OK)
> > drmOpenByBusid: drmOpenMinor returns 11
> > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> > (EE) AIGLX error: Calling driver entry point
> failed(EE) AIGLX: reverting to software rendering
> > (II) AIGLX: Loaded and initialized
> /usr/local/lib/dri/swrast_dri.so
> > (II) GLX: Initialized DRISWRAST GL provider for screen
> 0
> > (II) intel(0): Setting screen physical size to 359 x
> 287
> > (II) config/hal: Adding input device AT Keyboard
> > (II) LoadModule: "kbd"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/input//kbd_drv.so
> > (II) Module kbd: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 1.3.2
> > Module class: X.Org XInput Driver
> > ABI class: X.Org XInput driver, version 2.1
> > (**) AT Keyboard: always reports core events
> > (**) Option "Protocol" "standard"
> > (**) AT Keyboard: Protocol: standard
> > (**) Option "AutoRepeat" "500 30"
> > (**) Option "XkbRules" "base"
> > (**) AT Keyboard: XkbRules: "base"
> > (**) Option "XkbModel" "pc105"
> > (**) AT Keyboard: XkbModel: "pc105"
> > (**) Option "XkbLayout" "us,ru"
> > (**) AT Keyboard: XkbLayout: "us,ru"
> > (**) Option "XkbVariant"
> ",winkeys"
> > (**) AT Keyboard: XkbVariant: ",winkeys"
> > (**) Option "XkbOptions"
> "grp:ctrl_shift_toggle,grp_led:scroll"
> > (**) AT Keyboard: XkbOptions:
> "grp:ctrl_shift_toggle,grp_led:scroll"
> > (**) Option "CustomKeycodes" "off"
> > (**) AT Keyboard: CustomKeycodes disabled
> > (II) XINPUT: Adding extended input device "AT
> Keyboard" (type: KEYBOARD)
> > (II) config/hal: Adding input device PS/2 Mouse
> > (II) LoadModule: "mouse"
> >
> > (II) Loading
> /usr/local/lib/xorg/modules/input//mouse_drv.so
> > (II) Module mouse: vendor="X.Org Foundation"
> > compiled for 1.5.3, module version = 1.4.0
> > Module class: X.Org XInput Driver
> > ABI class: X.Org XInput driver, version 2.1
> > (**) PS/2 Mouse: Device: "/dev/psm0"
> > (==) PS/2 Mouse: Protocol: "Auto"
> > (**) PS/2 Mouse: always reports core events
> > (**) Option "Device" "/dev/psm0"
> > (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
> > (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
> > (**) Option "EmulateWheel" "true"
> > (**) Option "EmulateWheelButton"
> "2"
> > (**) Option "EmulateWheelTimeout"
> "200"
> > (**) Option "XAxisMapping" "4 5"
> > (**) PS/2 Mouse: XAxisMapping: buttons 4 and 5
> > (**) Option "YAxisMapping" "6 7"
> > (**) PS/2 Mouse: YAxisMapping: buttons 6 and 7
> > (**) PS/2 Mouse: EmulateWheel, EmulateWheelButton: 2,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> > (**) PS/2 Mouse: Buttons: 11
> > (**) PS/2 Mouse: Sensitivity: 1
> > (II) XINPUT: Adding extended input device "PS/2
> Mouse" (type: MOUSE)
> > (II) PS/2 Mouse: SetupAuto: hw.iftype is 3, hw.model
> is 10
> > (II) PS/2 Mouse: SetupAuto: protocol is ExplorerPS/2
> > (II) PS/2 Mouse: ps2EnableDataReporting: succeeded
> > (WW) fcntl(12, O_ASYNC): Inappropriate ioctl for
> device
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> registered at address 0xA0.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> removed.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): Using hsync ranges from config file
> > (II) intel(0): Using vrefresh ranges from config file
> > (II) intel(0): Printing DDC gathered Modelines:
> > (II) intel(0): Modeline "1280x1024"x0.0
> 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (64.0 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> kHz)
> > (II) intel(0): Modeline "720x400"x0.0
> 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> kHz)
> > (II) intel(0): Modeline "1280x1024"x0.0
> 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (80.0 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (60.1 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (56.5 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (48.4 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> kHz)
> > (II) intel(0): Modeline "1280x1024"x60.0
> 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> +vsync (63.6 kHz)
> > (II) intel(0): Modeline "1280x960"x60.0
> 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> (59.6 kHz)
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> registered at address 0xA0.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> removed.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): Using hsync ranges from config file
> > (II) intel(0): Using vrefresh ranges from config file
> > (II) intel(0): Printing DDC gathered Modelines:
> > (II) intel(0): Modeline "1280x1024"x0.0
> 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (64.0 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> kHz)
> > (II) intel(0): Modeline "720x400"x0.0
> 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> kHz)
> > (II) intel(0): Modeline "1280x1024"x0.0
> 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (80.0 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (60.1 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (56.5 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (48.4 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> kHz)
> > (II) intel(0): Modeline "1280x1024"x60.0
> 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> +vsync (63.6 kHz)
> > (II) intel(0): Modeline "1280x960"x60.0
> 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> (59.6 kHz)
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> registered at address 0xA0.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> removed.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): Using hsync ranges from config file
> > (II) intel(0): Using vrefresh ranges from config file
> > (II) intel(0): Printing DDC gathered Modelines:
> > (II) intel(0): Modeline "1280x1024"x0.0
> 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (64.0 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> kHz)
> > (II) intel(0): Modeline "720x400"x0.0
> 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> kHz)
> > (II) intel(0): Modeline "1280x1024"x0.0
> 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (80.0 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (60.1 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (56.5 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (48.4 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> kHz)
> > (II) intel(0): Modeline "1280x1024"x60.0
> 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> +vsync (63.6 kHz)
> > (II) intel(0): Modeline "1280x960"x60.0
> 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> (59.6 kHz)
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> registered at address 0xA0.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> removed.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): Using hsync ranges from config file
> > (II) intel(0): Using vrefresh ranges from config file
> > (II) intel(0): Printing DDC gathered Modelines:
> > (II) intel(0): Modeline "1280x1024"x0.0
> 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (64.0 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> kHz)
> > (II) intel(0): Modeline "720x400"x0.0
> 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> kHz)
> > (II) intel(0): Modeline "1280x1024"x0.0
> 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (80.0 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (60.1 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (56.5 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (48.4 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> kHz)
> > (II) intel(0): Modeline "1280x1024"x60.0
> 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> +vsync (63.6 kHz)
> > (II) intel(0): Modeline "1280x960"x60.0
> 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> (59.6 kHz)
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): I2C bus "CRTDDC_A"
> initialized.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> registered at address 0xA0.
> > (II) intel(0): I2C device "CRTDDC_A:ddc2"
> removed.
> > (II) intel(0): I2C bus "CRTDDC_A" removed.
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> > (II) intel(0): Using hsync ranges from config file
> > (II) intel(0): Using vrefresh ranges from config file
> > (II) intel(0): Printing DDC gathered Modelines:
> > (II) intel(0): Modeline "1280x1024"x0.0
> 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (64.0 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9
> kHz)
> > (II) intel(0): Modeline "640x480"x0.0
> 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5
> kHz)
> > (II) intel(0): Modeline "720x400"x0.0
> 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5
> kHz)
> > (II) intel(0): Modeline "1280x1024"x0.0
> 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync
> +vsync (80.0 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
> (60.1 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
> (56.5 kHz)
> > (II) intel(0): Modeline "1024x768"x0.0
> 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
> (48.4 kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9
> kHz)
> > (II) intel(0): Modeline "800x600"x0.0
> 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1
> kHz)
> > (II) intel(0): Modeline "1280x1024"x60.0
> 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync
> +vsync (63.6 kHz)
> > (II) intel(0): Modeline "1280x960"x60.0
> 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
> (59.6 kHz)
> > (II) intel(0): EDID vendor "SNY", prod id
> 10096
> >
> >
> >
> >
> >
> > _______________________________________________
> > freebsd-x11@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> > To unsubscribe, send any mail to
> "freebsd-x11-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?116536.11364.qm>