Date: Fri, 7 Jul 2006 08:04:13 -0400 From: John Nielsen <lists@jnielsen.net> To: freebsd-questions@freebsd.org Cc: Olivier Nicole <on@cs.ait.ac.th>, questions@freebsd.org Subject: Re: Creating vinum RAID 1 on place Message-ID: <200607070804.13892.lists@jnielsen.net> In-Reply-To: <200607070429.k674TkjX027354@banyan.cs.ait.ac.th> References: <200607070429.k674TkjX027354@banyan.cs.ait.ac.th>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 07 July 2006 00:29, Olivier Nicole wrote: > Is there a trick on the way to build a vinum RAID 1 without backup-in > the data first? > > I have the two disk that will get mirrored. One of the disk if > formated as UFS 4.2 and already holds all the data. The second disk is > blank. > > NormallyI should start with 2 blank disks, label them as vinum, create > the vinum plex, then push the data on that RAID. Is there a way to do > it without blanking both disk first (a RAID 0 on a single disk, copy > the data on the RAID 0), label the other disk as vinum and create a > RAID1? This is quite possible. The 100% safe way would be to configure the blank disk as the sole member of a (degraded) mirror set, use dump / restore to transfer the data from the existing filesystem to the "mirror", then wipe the old filesystem and add the original disk to the mirror. The faster but only 90% safe way would be to "gmirror label" the partition containing the existing filesystem and then adding the second disk as a member. This is not safe if the last sector of the existing provider (where gmirror stores its metadata) is (or could be in the future) used by the filesystem. Frequently the geometry works out such that there are spare sectors at the end of a partition that are not used by newfs, but if you're not sure then don't go this route. See the archives of this and other lists for details about this situation. JN
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200607070804.13892.lists>