Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Apr 2005 11:41:06 +0200
From:      Palle Girgensohn <girgen@FreeBSD.org>
To:        amd64@freebsd.org
Cc:        stable@freebsd.org
Subject:   Dell 2850 sporadically reboots (amd64)
Message-ID:  <EB3460FC4B19F4F6921C3453@rambutan.pingpong.net>

next in thread | raw e-mail | index | archive | help
Hi!

We have a dual CPU Dell 2850 running fresh RELENG_5_4 (amd64). It reboots 
sporadically, a few times per day! It has a rather high load, running php, 
apache & postfix. Is anyone else experiencing any problems with this kind 
of setup?

diff against GENERIC kernel is minor:

+# SMP
+options                SMP
+
+# SysV stuff
+# This provides support for System V shared memory.
+#
+options                SYSVSHM
+options                SYSVSEM
+options                SYSVMSG
+options                SHMMAXPGS=65536
+options                SEMMNI=40
+options                SEMMNS=240
+options                SEMUME=40
+options                SEMMNU=120


Also

CPUTYPE?=nocona

is set in /etc/make.conf


Any ideas about this would ber *very* appreciated.  Thanks!

See also my previous post from yesterday.

Regards,
Palle

$ dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC2 #1: Wed Apr 13 01:24:15 CEST 2005
    girgen@melon.pingpong.net:/usr/obj/usr/src/sys/MELON
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2>,MON,DS_CPL,CNTX-ID,CX16,<b14>>
  AMD Features=0x20000800<SYSCALL,LM>
  Hyperthreading: 2 logical CPUs
real memory  = 2147221504 (2047 MB)
avail memory = 2061373440 (1965 MB)
ACPI APIC Table: <DELL   PE BKC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
amr0: <LSILogic MegaRAID 1.51> mem 
0xdfdc0000-0xdfdfffff,0xd80f0000-0xd80fffff irq 46 at device 14.0 on pci2
amr0: <LSILogic PERC 4e/Di> Firmware 513O, BIOS H418, 256MB RAM
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 
0xecc0-0xecff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:11:43:37:a4:9e
em0:  Speed:N/A  Duplex:N/A
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 
0xdcc0-0xdcff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:11:43:37:a4:9f
em1:  Speed:N/A  Duplex:N/A
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff irq 
16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf irq 
19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf irq 
18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 
0xec000-0xeffff,0xce800-0xcf7ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub3: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub3: 2 ports with 2 removable, self powered
Timecounters tick every 1.000 msec
acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master PIO4
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 139760MB (286228480 sectors) RAID 5 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <PE/PV 1x6 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/amrd0s2a
WARNING: / was not properly dismounted
WARNING: /misc was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /usr/local was not properly dismounted
/usr/local: mount pending error: blocks 32 files 3
WARNING: /var was not properly dismounted
WARNING: /var/spool/imap was not properly dismounted
/var/spool/imap: mount pending error: blocks 20 files 4
em1: Link is up 100 Mbps Half Duplex
em0: Link is up 1000 Mbps Full Duplex



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EB3460FC4B19F4F6921C3453>