Date: Sat, 6 Dec 2008 15:42:27 GMT From: Ed Schouten <ed@FreeBSD.org> To: Perforce Change Reviews <perforce@FreeBSD.org> Subject: PERFORCE change 154194 for review Message-ID: <200812061542.mB6FgR1G013167@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=154194 Change 154194 by ed@ed_flippo on 2008/12/06 15:41:58 Switch /etc/ttys from cons25 to xterm. Affected files ... .. //depot/projects/mpsafetty/etc/etc.amd64/ttys#4 edit .. //depot/projects/mpsafetty/etc/etc.arm/ttys#3 edit .. //depot/projects/mpsafetty/etc/etc.i386/ttys#4 edit .. //depot/projects/mpsafetty/etc/etc.ia64/ttys#3 edit .. //depot/projects/mpsafetty/etc/etc.mips/ttys#4 edit .. //depot/projects/mpsafetty/etc/etc.powerpc/ttys#3 edit .. //depot/projects/mpsafetty/etc/etc.sparc64/ttys#3 edit Differences ... ==== //depot/projects/mpsafetty/etc/etc.amd64/ttys#4 (text+ko) ==== @@ -15,7 +15,7 @@ # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically cons25, but +# For virtual consoles, the correct type is typically xterm, but # vt220 will work better if you need interoperability with other # systems like Solaris or GNU/Linux. # Other common values include network for network connections on @@ -32,15 +32,15 @@ # when going to single-user mode. console none unknown off secure # -ttyv0 "/usr/libexec/getty Pc" cons25 on secure +ttyv0 "/usr/libexec/getty Pc" xterm on secure # Virtual terminals -ttyv1 "/usr/libexec/getty Pc" cons25 on secure -ttyv2 "/usr/libexec/getty Pc" cons25 on secure -ttyv3 "/usr/libexec/getty Pc" cons25 on secure -ttyv4 "/usr/libexec/getty Pc" cons25 on secure -ttyv5 "/usr/libexec/getty Pc" cons25 on secure -ttyv6 "/usr/libexec/getty Pc" cons25 on secure -ttyv7 "/usr/libexec/getty Pc" cons25 on secure +ttyv1 "/usr/libexec/getty Pc" xterm on secure +ttyv2 "/usr/libexec/getty Pc" xterm on secure +ttyv3 "/usr/libexec/getty Pc" xterm on secure +ttyv4 "/usr/libexec/getty Pc" xterm on secure +ttyv5 "/usr/libexec/getty Pc" xterm on secure +ttyv6 "/usr/libexec/getty Pc" xterm on secure +ttyv7 "/usr/libexec/getty Pc" xterm on secure ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure # Serial terminals # The 'dialup' keyword identifies dialin lines to login, fingerd etc. ==== //depot/projects/mpsafetty/etc/etc.arm/ttys#3 (text+ko) ==== @@ -15,7 +15,7 @@ # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically cons25, but +# For virtual consoles, the correct type is typically xterm, but # vt220 will work better if you need interoperability with other # systems like Solaris or GNU/Linux. # Other common values include network for network connections on @@ -32,15 +32,15 @@ # when going to single-user mode. console none unknown off secure # -ttyv0 "/usr/libexec/getty Pc" cons25 on secure +ttyv0 "/usr/libexec/getty Pc" xterm on secure # Virtual terminals -ttyv1 "/usr/libexec/getty Pc" cons25 on secure -ttyv2 "/usr/libexec/getty Pc" cons25 on secure -ttyv3 "/usr/libexec/getty Pc" cons25 on secure -ttyv4 "/usr/libexec/getty Pc" cons25 on secure -ttyv5 "/usr/libexec/getty Pc" cons25 on secure -ttyv6 "/usr/libexec/getty Pc" cons25 on secure -ttyv7 "/usr/libexec/getty Pc" cons25 on secure +ttyv1 "/usr/libexec/getty Pc" xterm on secure +ttyv2 "/usr/libexec/getty Pc" xterm on secure +ttyv3 "/usr/libexec/getty Pc" xterm on secure +ttyv4 "/usr/libexec/getty Pc" xterm on secure +ttyv5 "/usr/libexec/getty Pc" xterm on secure +ttyv6 "/usr/libexec/getty Pc" xterm on secure +ttyv7 "/usr/libexec/getty Pc" xterm on secure #ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure # Serial terminals # The 'dialup' keyword identifies dialin lines to login, fingerd etc. ==== //depot/projects/mpsafetty/etc/etc.i386/ttys#4 (text+ko) ==== @@ -15,7 +15,7 @@ # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically cons25, but +# For virtual consoles, the correct type is typically xterm, but # vt220 will work better if you need interoperability with other # systems like Solaris or GNU/Linux. # Other common values include network for network connections on @@ -32,15 +32,15 @@ # when going to single-user mode. console none unknown off secure # -ttyv0 "/usr/libexec/getty Pc" cons25 on secure +ttyv0 "/usr/libexec/getty Pc" xterm on secure # Virtual terminals -ttyv1 "/usr/libexec/getty Pc" cons25 on secure -ttyv2 "/usr/libexec/getty Pc" cons25 on secure -ttyv3 "/usr/libexec/getty Pc" cons25 on secure -ttyv4 "/usr/libexec/getty Pc" cons25 on secure -ttyv5 "/usr/libexec/getty Pc" cons25 on secure -ttyv6 "/usr/libexec/getty Pc" cons25 on secure -ttyv7 "/usr/libexec/getty Pc" cons25 on secure +ttyv1 "/usr/libexec/getty Pc" xterm on secure +ttyv2 "/usr/libexec/getty Pc" xterm on secure +ttyv3 "/usr/libexec/getty Pc" xterm on secure +ttyv4 "/usr/libexec/getty Pc" xterm on secure +ttyv5 "/usr/libexec/getty Pc" xterm on secure +ttyv6 "/usr/libexec/getty Pc" xterm on secure +ttyv7 "/usr/libexec/getty Pc" xterm on secure ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure # Serial terminals # The 'dialup' keyword identifies dialin lines to login, fingerd etc. ==== //depot/projects/mpsafetty/etc/etc.ia64/ttys#3 (text+ko) ==== @@ -15,7 +15,7 @@ # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically cons25, but +# For virtual consoles, the correct type is typically xterm, but # vt220 will work better if you need interoperability with other # systems like Solaris or GNU/Linux. # Other common values include network for network connections on @@ -32,15 +32,15 @@ # when going to single-user mode. console none unknown off secure # -ttyv0 "/usr/libexec/getty Pc" cons25 off secure +ttyv0 "/usr/libexec/getty Pc" xterm off secure # Virtual terminals. -ttyv1 "/usr/libexec/getty Pc" cons25 off secure -ttyv2 "/usr/libexec/getty Pc" cons25 off secure -ttyv3 "/usr/libexec/getty Pc" cons25 off secure -ttyv4 "/usr/libexec/getty Pc" cons25 off secure -ttyv5 "/usr/libexec/getty Pc" cons25 off secure -ttyv6 "/usr/libexec/getty Pc" cons25 off secure -ttyv7 "/usr/libexec/getty Pc" cons25 off secure +ttyv1 "/usr/libexec/getty Pc" xterm off secure +ttyv2 "/usr/libexec/getty Pc" xterm off secure +ttyv3 "/usr/libexec/getty Pc" xterm off secure +ttyv4 "/usr/libexec/getty Pc" xterm off secure +ttyv5 "/usr/libexec/getty Pc" xterm off secure +ttyv6 "/usr/libexec/getty Pc" xterm off secure +ttyv7 "/usr/libexec/getty Pc" xterm off secure ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure # Serial terminals. The 'dialup' keyword identifies dialin lines to login, # fingerd etc. ==== //depot/projects/mpsafetty/etc/etc.mips/ttys#4 (text+ko) ==== @@ -15,7 +15,7 @@ # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically cons25, but +# For virtual consoles, the correct type is typically xterm, but # vt220 will work better if you need interoperability with other # systems like Solaris or GNU/Linux. # Other common values include network for network connections on ==== //depot/projects/mpsafetty/etc/etc.powerpc/ttys#3 (text+ko) ==== @@ -15,7 +15,7 @@ # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically cons25, but +# For virtual consoles, the correct type is typically xterm, but # vt220 will work better if you need interoperability with other # systems like Solaris or GNU/Linux. # Other common values include network for network connections on @@ -32,15 +32,15 @@ # when going to single-user mode. console none unknown off secure # -ttyv0 "/usr/libexec/getty Pc" cons25 on secure +ttyv0 "/usr/libexec/getty Pc" xterm on secure # Virtual terminals -ttyv1 "/usr/libexec/getty Pc" cons25 on secure -ttyv2 "/usr/libexec/getty Pc" cons25 on secure -ttyv3 "/usr/libexec/getty Pc" cons25 on secure -ttyv4 "/usr/libexec/getty Pc" cons25 on secure -ttyv5 "/usr/libexec/getty Pc" cons25 on secure -ttyv6 "/usr/libexec/getty Pc" cons25 on secure -ttyv7 "/usr/libexec/getty Pc" cons25 on secure +ttyv1 "/usr/libexec/getty Pc" xterm on secure +ttyv2 "/usr/libexec/getty Pc" xterm on secure +ttyv3 "/usr/libexec/getty Pc" xterm on secure +ttyv4 "/usr/libexec/getty Pc" xterm on secure +ttyv5 "/usr/libexec/getty Pc" xterm on secure +ttyv6 "/usr/libexec/getty Pc" xterm on secure +ttyv7 "/usr/libexec/getty Pc" xterm on secure #ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure # Serial terminals # The 'dialup' keyword identifies dialin lines to login, fingerd etc. ==== //depot/projects/mpsafetty/etc/etc.sparc64/ttys#3 (text+ko) ==== @@ -15,7 +15,7 @@ # # type The initial terminal type for this port. For hardwired # terminal lines, this will contain the type of terminal used. -# For virtual consoles, the correct type is typically cons25, but +# For virtual consoles, the correct type is typically xterm, but # vt220 will work better if you need interoperability with other # systems like Solaris or GNU/Linux. # Other common values include network for network connections on @@ -36,15 +36,15 @@ ttya "/usr/libexec/getty 3wire.9600" vt100 off secure ttyb "/usr/libexec/getty 3wire.9600" vt100 off secure # syscons(4) -ttyv0 "/usr/libexec/getty Pc" cons25 on secure +ttyv0 "/usr/libexec/getty Pc" xterm on secure # Virtual terminals -ttyv1 "/usr/libexec/getty Pc" cons25 on secure -ttyv2 "/usr/libexec/getty Pc" cons25 on secure -ttyv3 "/usr/libexec/getty Pc" cons25 on secure -ttyv4 "/usr/libexec/getty Pc" cons25 on secure -ttyv5 "/usr/libexec/getty Pc" cons25 on secure -ttyv6 "/usr/libexec/getty Pc" cons25 on secure -ttyv7 "/usr/libexec/getty Pc" cons25 on secure +ttyv1 "/usr/libexec/getty Pc" xterm on secure +ttyv2 "/usr/libexec/getty Pc" xterm on secure +ttyv3 "/usr/libexec/getty Pc" xterm on secure +ttyv4 "/usr/libexec/getty Pc" xterm on secure +ttyv5 "/usr/libexec/getty Pc" xterm on secure +ttyv6 "/usr/libexec/getty Pc" xterm on secure +ttyv7 "/usr/libexec/getty Pc" xterm on secure ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure # Serial terminals # The 'dialup' keyword identifies dialin lines to login, fingerd etc.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200812061542.mB6FgR1G013167>