Date: Thu, 06 Aug 1998 16:28:33 -0500 From: Isaac Hopkins <isaac@state.net> To: Andreas Strobel <andreas.strobel@dbag.ulm.DaimlerBenz.COM>, freebsd-questions@FreeBSD.ORG Subject: Re: cd-recorder Message-ID: <3.0.5.32.19980806162833.007328f0@bart.state.net> In-Reply-To: <35C98826.41C67EA6@dbag.ulm.daimlerbenz.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I think you need to add device worm0 to your kernel and recompile. Isaac Hopkins At 12:40 PM 8/6/98 +0200, Andreas Strobel wrote: >Hi >i want to use a cd recorder yamaha cde 100 II on my FreeBSD System. I >got following messages for the scsi devices on startup: > >ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 1 int a irq 15 on >pci0: >6 >ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs >ahc0 waiting for scsi devices to settle >(ahc0:0:0): "IBM DCAS-34330 S65A" type 0 fixed SCSI 2 >sd0(ahc0:0:0): Direct-Access 4134MB (8467200 512 byte sectors) >(ahc0:2:0): "TOSHIBA CD-ROM XM-6201TA 1030" type 5 removable SCSI 2 >cd0(ahc0:2:0): CD-ROM can't get the size > >aha0 at 0x330-0x333 irq 11 drq 5 on isa >aha0 waiting for scsi devices to settle >(aha0:3:0): "YAMAHA CDR100 1.12" type 4 removable SCSI 2 >uk0(aha0:3:0): Unknown >(aha0:3:1): "YAMAHA CDR100 1.12" type 4 removable SCSI 2 >uk1(aha0:3:1): Unknowntype >(aha0:3:2): "YAMAHA CDR100 1.12" type 4 removable SCSI 2 >uk2(aha0:3:2): Unknown >(aha0:3:3): "YAMAHA CDR100 1.12" type 4 removable SCSI 2 >uk3(aha0:3:3): Unknown >(aha0:3:4): "YAMAHA CDR100 1.12" type 4 removable SCSI 2 >uk4(aha0:3:4): Unknown >(aha0:3:5): "YAMAHA CDR100 1.12" type 4 removable SCSI 2 >uk5(aha0:3:5): Unknown >(aha0:3:6): "YAMAHA CDR100 1.12" type 4 removable SCSI 2 >uk6(aha0:3:6): Unknown >(aha0:3:7): "YAMAHA CDR100 1.12" type 4 removable SCSI 2 >uk7(aha0:3:7): Unknown > >i build up a new kernel with following scsi parameters: > > >controller ncr0 >controller amd0 >controller ahb0 >controller ahc0 >controller bt0 at isa? port "IO_BT0" bio irq ? vector >bt_isa_intr >controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector >uhai >ntr >controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector >ahai >ntr >controller aic0 at isa? port 0x340 bio irq 11 vector aicintr >controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr >controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr >controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 >vecto >r seai >ntr > >controller scbus0 > >device sd0 > >device od0 #See LINT for possible `od' options. > >device st0 > >device cd0 #Only need one of these, the code dynamically >grow >s > >are there any mistakes in the config file, with the exeption that i can >delete some controller, or is it necessary to add some parameters to the >kernel config file? Or is it possible to work with this uk device? If >everything is allright how can i create a device in /dev for uk? > > >Sincerely > >Andreas > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19980806162833.007328f0>