Date: Thu, 10 Dec 1998 03:04:38 -0500 (EST) From: "James A. Mutter" <jmutter@netwalk.com> To: questions@FreeBSD.ORG Cc: x@xfree86.org, x@suse.de Subject: Problems with XFree86 3.3.3 & Diamond FireGL Message-ID: <Pine.BSF.4.05.9812100250350.11018-100000@insomnia.local.net>
next in thread | raw e-mail | index | archive | help
This one's a doosy. Guys, I can't seem to get X working properly here. I'm starting X with this command - startx -- -bpp 24 Here's the output - XFCom_3DLabs Version 4.10/ X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: 27 July 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. Please report problems to x@suse.de Operating System: FreeBSD 2.2.5-RELEASE i386 Configured drivers: GLINT: accelerated server for 3DLabs GLINT graphics adapters (Patchlevel 0) Using syscons driver with X support (version 2.0) (using VT number 5) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: Microsoft, device: /dev/cuaa0, baudrate: 1200 (**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms) (**) GLINT: Graphics device ID: "Diamond Fire GL 1000 PRO" (**) GLINT: Monitor ID: "My Monitor" (--) GLINT: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) GLINT: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) GLINT: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75 dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts /Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X1 1R6/lib/X11/fonts/100dpi/" (--) GLINT: found TI chip GLINT Permedia 2 at card #0 func #0 with base 0xe60000 00 (--) GLINT: Framebuffer address at 0xe5000000 (--) GLINT: videoram : 8192k (--) GLINT: Using builtin RAMDAC of Permedia 2 chip (--) GLINT: Fitted Memory type is : SGRAM (--) GLINT: VGA core is : Enabled (--) GLINT: Maximum allowed dot-clock: 150.000 MHz (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Mode "640x480": mode clock = 45.800 (**) GLINT: Mode "800x600": mode clock = 69.650 (**) GLINT: Mode "1024x768": mode clock = 115.500 (**) GLINT: Mode "1280x1024": mode clock = 135.000 (--) GLINT: Using XAA (XFree86 Acceleration Architecture) (--) GLINT: XAA: Solid filled rectangles (--) GLINT: XAA: Screen-to-screen copy (--) GLINT: XAA: Using 10 128x128 areas for pixmap caching (--) GLINT: XAA: Caching tiles (--) GLINT: XAA: Horizontal and vertical lines and segments System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m us -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 /var/tmp/xfree86.xkm' ---------- Problem is that while it seems to be starting in 24bpp, it really isn't. It's starting in what I think is 16bpp. Any ideas? Below is the XF86Config. <snipped out the mouse/joystick/mod path/etc...> # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "My Monitor" VendorName "Unknown" ModelName "Unknown" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30-96 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 48-160 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # 640x400 @ 70 Hz, 31.5 kHz hsync Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 # 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace # 640x400 @ 85 Hz, 37.86 kHz hsync Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VS ync # 640x480 @ 72 Hz, 36.5 kHz hsync Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 640x480 @ 75 Hz, 37.50 kHz hsync ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VS ync # 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vs ync # 640x480 @ 85 Hz, 43.27 kHz hsync Modeline "640x400" 36 640 696 752 832 480 481 484 509 -HSync -VS ync # 1152x864 @ 89 Hz interlaced, 44 kHz hsync ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace # 800x600 @ 72 Hz, 48.0 kHz hsync Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vs ync # 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vs ync # 640x480 @ 100 Hz, 53.01 kHz hsync Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VS ync # 1152x864 @ 60 Hz, 53.5 kHz hsync Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VS ync # 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VS ync # 1024x768 @ 70 Hz, 56.5 kHz hsync Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vs ync # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace # 800x600 @ 100 Hz, 64.02 kHz hsync Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VS ync # 1024x768 @ 76 Hz, 62.5 kHz hsync Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 # 1152x864 @ 70 Hz, 62.4 kHz hsync Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 # 1280x1024 @ 61 Hz, 64.2 kHz hsync Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 # 1024x768 @ 85 Hz, 70.24 kHz hsync Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync # 1152x864 @ 78 Hz, 70.8 kHz hsync Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 # 1280x1024 @ 70 Hz, 74.59 kHz hsync Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSy nc # 1600x1200 @ 60Hz, 75.00 kHz hsync Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSy nc # 1152x864 @ 84 Hz, 76.0 kHz hsync Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 # 1280x1024 @ 74 Hz, 78.85 kHz hsync Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 # 1024x768 @ 100Hz, 80.21 kHz hsync Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSy nc # 1280x1024 @ 76 Hz, 81.13 kHz hsync Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 # 1600x1200 @ 70 Hz, 87.50 kHz hsync Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VS ync # 1152x864 @ 100 Hz, 89.62 kHz hsync Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VS ync # 1280x1024 @ 85 Hz, 91.15 kHz hsync Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VS ync # 1600x1200 @ 75 Hz, 93.75 kHz hsync Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VS ync # 1600x1200 @ 85 Hz, 105.77 kHz hsync Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VS ync # 1280x1024 @ 100 Hz, 107.16 kHz hsync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VS ync # 1800x1440 @ 64Hz, 96.15 kHz hsync ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSy nc # 1800x1440 @ 70Hz, 104.52 kHz hsync ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSy nc # 512x384 @ 78 Hz, 31.50 kHz hsync Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSy nc # 512x384 @ 85 Hz, 34.38 kHz hsync Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSy nc # Low-res Doublescan modes # If your chipset does not support doublescan, you get a 'squashed' # resolution like 320x400. # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan # 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan # 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan # 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan # 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset "generic" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Sample Device for accelerated server: # Section "Device" # Identifier "Actix GE32+ 2MB" # VendorName "Actix" # BoardName "GE32+" # Ramdac "ATT20C490" # Dacspeed 110 # Option "dac_8_bit" # Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0 # Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0 # EndSection # Sample Device for Hercules mono card: # Section "Device" # Identifier "Hercules mono" # EndSection # Device configured by xf86config: Section "Device" Identifier "Diamond Fire GL 1000 PRO" VendorName "Unknown" BoardName "Unknown" #VideoRam 8192 #Option "no_accel" # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Colour SVGA server #Section "Screen" # Driver "svga" # Device "Generic VGA" # #Device "Diamond Fire GL 1000 PRO" # Monitor "My Monitor" # Subsection "Display" # Depth 8 # #Modes "640x480" "800x600" "1024x768" "1280x1024" # ViewPort 0 0 # Virtual 320 200 # #Virtual 1600 1280 # EndSubsection #EndSection # The 16-color VGA server #Section "Screen" # Driver "vga16" # Device "Generic VGA" # Monitor "My Monitor" # Subsection "Display" # Modes "640x480" "800x600" # ViewPort 0 0 # Virtual 800 600 # EndSubsection #EndSection # The Mono server #Section "Screen" # Driver "vga2" # Device "Generic VGA" # Monitor "My Monitor" # Subsection "Display" # Modes "640x480" "800x600" # ViewPort 0 0 # Virtual 800 600 # EndSubsection #EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64) Section "Screen" Driver "accel" Device "Diamond Fire GL 1000 PRO" Monitor "My Monitor" # Subsection "Display" # Depth 8 # Modes "640x480" "800x600" "1024x768" "1280x1024" # ViewPort 0 0 # EndSubsection Subsection "Display" Depth 16 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection # Subsection "Display" # Depth 32 # Modes "640x480" "800x600" "1024x768" # ViewPort 0 0 # EndSubsection EndSection ------------- Sorry it had to be so lengthy - I wanted to make sure all of the information was provided. :) Anyhow, the system is: PII/233 - AGP Diamond FireGL 1000 Pro - 3DLabs server (I recently grabbed the binary of the server from xfree86.org, it was dated 11/30). I'm really at a loss here. The output from startx doesn't seem to be complaining about the color depth, but I can tell you by looking at it that something is wrong. Thanks for all your help. Jim - - Failure isn't getting knocked down - Failure is not getting back up. - To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9812100250350.11018-100000>