Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Jan 2003 15:26:46 +0200
From:      Karo Salminen <karo@karo.kaista.com>
To:        freebsd-current@freebsd.org
Cc:        freebsd-questions@freebsd.org
Subject:   panic: contigmalloc1 with 5.0
Message-ID:  <200301201526.52303.karo@karo.kaista.com>

Next in thread | Raw E-Mail | Index | Archive | Help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Greets,

FreeBSD 5.0-RELEASE GENERIC kernel gives me the following panic just after it 
finds agp device:
panic: contigmalloc1: size must not be 0

Whole dmesg:

- --BEGIN--
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Mon Jan 20 02:15:35 EET 2003
    karo@yabba.kortex.jyu.fi:/usr/obj/annex/src/sys/GENERIC
Preloaded elf kernel "/boot//kernel/kernel" at 0xc0671000.
Preloaded elf module "/boot//kernel/acpi.ko" at 0xc06710ac.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 797052687 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.05-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory  = 259981312 (247 MB)
avail memory = 245624832 (234 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Acer   FALCON2M> on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE63
Using $PIR table, 5 entries at 0xc00fb9d0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf108-0xf10b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 
on pci0
panic: contigmalloc1: size must not be 0
- --END--

And below is the dmesg of working 4.7-STABLE:

- --BEGIN--
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Wed Dec  4 16:31:50 EET 2002
    karo@yabba.kortex.jyu.fi:/usr/obj/annex/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.05-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10  

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory  = 259981312 (253888K bytes)
avail memory = 247721984 (241916K bytes)
Preloaded elf kernel "/kernel.GENERIC" at 0xc051c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: No call entry point
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8620 VGA-compatible display device> at 0.0 irq 11
pci0: <unknown card> (vendor=0x10b9, dev=0x5451) at 6.0 irq 10
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AcerLabs Aladdin ATA66 controller> port 0x7050-0x705f irq 15 at 
device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
pcic0: <O2micro 6812/6872 PCI-Cardbus Bridge> irq 11 at device 19.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card 16-bit bus (classic)> on pcic0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x81c00000-0x81c00fff 
irq
 11 at device 20.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pccard: card inserted, slot 0
pccard: card removed, slot 0
ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master UDMA66
acd0: CDROM <TOSHIBA CD-ROM XM-7002Bc> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
ed1 at port 0x300-0x31f irq 11 slot 0 on pccard0
ed1: address 00:20:cb:82:09:32, type NE2000 (16 bit) 
- --END--
- -- 
Karo Salminen
GSM: +358 45 6728280
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)

iD8DBQE+K/kcvt6lNXuj7xcRAlC1AJ4yxZmh9t+4GYHj/myUPunpOMeP1wCfSZJf
4Me/+IUYm0pjoevuN6uiMio=
=r2zC
-----END PGP SIGNATURE-----


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?200301201526.52303.karo>