From owner-freebsd-wireless@FreeBSD.ORG Tue Jan 14 20:23:16 2014 Return-Path: Delivered-To: freebsd-wireless@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id D7989C0F; Tue, 14 Jan 2014 20:23:16 +0000 (UTC) Received: from denrei.darkbsd.org (denrei.darkbsd.org [91.121.179.66]) by mx1.freebsd.org (Postfix) with ESMTP id 5687A14FC; Tue, 14 Jan 2014 20:23:15 +0000 (UTC) Received: from denrei.darkbsd.org (localhost [127.0.0.1]) by denrei.darkbsd.org (Postfix) with ESMTP id 9077E985; Tue, 14 Jan 2014 21:23:08 +0100 (CET) X-Virus-Scanned: amavisd-new at darkbsd.org Received: from denrei.darkbsd.org ([127.0.0.1]) by denrei.darkbsd.org (denrei.darkbsd.org [127.0.0.1]) (amavisd-new, port 10026) with ESMTP id mG1oqjtpXoMn; Tue, 14 Jan 2014 21:23:04 +0100 (CET) Received: from fusen (lns-bzn-49f-62-147-170-46.adsl.proxad.net [62.147.170.46]) (Authenticated sender: c.prevotaux@rural-networks.com) by denrei.darkbsd.org (Postfix) with ESMTPSA id 0384D983; Tue, 14 Jan 2014 21:23:03 +0100 (CET) Date: Tue, 14 Jan 2014 21:23:02 +0100 From: Christophe Prevotaux To: Adrian Chadd Subject: Re: ar9580 failures (typo correction) Message-ID: <20140114212302.3138b11e@fusen> In-Reply-To: References: <20140114145056.4f6dce36@fusen> Organization: Rural Networks X-Mailer: Claws Mail 3.8.1 (GTK+ 2.24.17; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Cc: "freebsd-wireless@freebsd.org" X-BeenThere: freebsd-wireless@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: "Discussions of 802.11 stack, tools device driver development." List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 14 Jan 2014 20:23:16 -0000 kernel already has been compiled with options ATH_ENABLE_11N (this was just a typo I made in the first post the kernel CONFIG contained the proper string.) in fact it contains all this # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG # enable debug msgs options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's options IEEE80211_SUPPORT_MESH # enable 802.11s draft support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device ath # Atheros NICs device ath_pci # Atheros pci/cardbus glue device ath_hal # pci/cardbus chip support options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors options AH_AR5416_INTERRUPT_MITIGATION # AR5416 interrupt mitigation options ATH_ENABLE_11N # Enable 802.11n support for AR5416 and later device ath_rate_sample # SampleRate tx rate control for ath On Tue, 14 Jan 2014 08:28:25 -0800 Adrian Chadd wrote: > Hi > > You need ATH_ENABLE_11N in your kernel config. > > > -a > > > On 14 January 2014 05:50, Christophe Prevotaux > wrote: > > Hi Everyone, > > > > I am running a FreeBSD/amd64 30/12/2013 CURRENT Snapshot on a Soekris 6501 with : > > > > options ATH_ENABLED_11N > > options mptable # (soekris 6501 requires it) > > > > and I get the following messages and failures : > > > > ath0: stuck beacon; resetting (bmiss count 0) > > ath0: stuck beacon; resetting (bmiss count 0) > > ath1: ath_edma_rxbuf_alloc: nothing on rxbuf?! > > ath0: stuck beacon; resetting (bmiss count 0) > > ath1: ath_edma_rxfifo_alloc: Q1: alloc failed: i=1, nbufs=128? > > ath1: ath_edma_rxbuf_alloc: nothing on rxbuf?! > > ath1: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128? > > ath1: ath_edma_rxbuf_alloc: nothing on rxbuf?! > > ath1: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128? > > ath1: ath_edma_rxbuf_alloc: nothing on rxbuf?! > > ath1: ath_edma_rxfifo_alloc: Q1: alloc failed: i=0, nbufs=128? > > ath0: stuck beacon; resetting (bmiss count 4) > > ath0: stuck beacon; resetting (bmiss count 0) > > > > The machine I am using has 2 AR9580 MiniPCIe Cards > > > > ath0 > > ath1 > > > > > > But traffic using iperf was generated on ath0 and ath1 > > > > Here is the pciconf -lv > > > > hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x41158086 rev=0x05 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Atom Processor E6xx PCI Host Bridge' > > class = bridge > > subclass = HOST-PCI > > hostb1@pci0:0:1:0: class=0x060000 card=0x00000000 chip=0x81838086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Atom Processor E6xx Configuration Unit' > > class = bridge > > subclass = HOST-PCI > > pcib1@pci0:0:23:0: class=0x060400 card=0x00000000 chip=0x81848086 rev=0x00 hdr=0x01 > > vendor = 'Intel Corporation' > > device = 'Atom Processor E6xx PCI Express Port 1' > > class = bridge > > subclass = PCI-PCI > > pcib3@pci0:0:24:0: class=0x060400 card=0x00000000 chip=0x81858086 rev=0x00 hdr=0x01 > > vendor = 'Intel Corporation' > > device = 'Atom Processor E6xx PCI Express Port 2' > > class = bridge > > subclass = PCI-PCI > > pcib8@pci0:0:25:0: class=0x060400 card=0x00000000 chip=0x81808086 rev=0x00 hdr=0x01 > > vendor = 'Intel Corporation' > > device = 'Atom Processor E6xx PCI Express Port 3' > > class = bridge > > subclass = PCI-PCI > > pcib13@pci0:0:26:0: class=0x060400 card=0x00000000 chip=0x81818086 rev=0x00 hdr=0x01 > > vendor = 'Intel Corporation' > > device = 'Atom Processor E6xx PCI Express Port 4' > > class = bridge > > subclass = PCI-PCI > > isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x81868086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Atom Processor E6xx LPC Bridge' > > class = bridge > > subclass = PCI-ISA > > pcib2@pci0:1:0:0: class=0x060400 card=0x00000000 chip=0x88008086 rev=0x01 hdr=0x01 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T PCI Express Port' > > class = bridge > > subclass = PCI-PCI > > none0@pci0:2:0:0: class=0xff0000 card=0x00000000 chip=0x88018086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T Packet Hub' > > none1@pci0:2:0:1: class=0x020000 card=0x00000000 chip=0x88028086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T Gigabit Ethernet Controller' > > class = network > > subclass = ethernet > > none2@pci0:2:0:2: class=0xff0000 card=0x00000000 chip=0x88038086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T General Purpose IO Controller' > > ohci0@pci0:2:2:0: class=0x0c0310 card=0x00000000 chip=0x88048086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB OHCI Controller' > > class = serial bus > > subclass = USB > > ohci1@pci0:2:2:1: class=0x0c0310 card=0x00000000 chip=0x88058086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB OHCI Controller' > > class = serial bus > > subclass = USB > > ohci2@pci0:2:2:2: class=0x0c0310 card=0x00000000 chip=0x88068086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB OHCI Controller' > > class = serial bus > > subclass = USB > > ehci0@pci0:2:2:3: class=0x0c0320 card=0x00000000 chip=0x88078086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB2 EHCI Controller' > > class = serial bus > > subclass = USB > > none3@pci0:2:2:4: class=0x0c03fe card=0x00000000 chip=0x88088086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB Client Controller' > > class = serial bus > > subclass = USB > > sdhci_pci0@pci0:2:4:0: class=0x080501 card=0x00000000 chip=0x88098086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T SDIO Controller' > > class = base peripheral > > subclass = SD host controller > > sdhci_pci1@pci0:2:4:1: class=0x080501 card=0x00000000 chip=0x880a8086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T SDIO Controller' > > class = base peripheral > > subclass = SD host controller > > ahci0@pci0:2:6:0: class=0x010601 card=0x00000000 chip=0x880b8086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T SATA AHCI Controller' > > class = mass storage > > subclass = SATA > > ohci3@pci0:2:8:0: class=0x0c0310 card=0x00000000 chip=0x880c8086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB OHCI Controller' > > class = serial bus > > subclass = USB > > ohci4@pci0:2:8:1: class=0x0c0310 card=0x00000000 chip=0x880d8086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB OHCI Controller' > > class = serial bus > > subclass = USB > > ohci5@pci0:2:8:2: class=0x0c0310 card=0x00000000 chip=0x880e8086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB OHCI Controller' > > class = serial bus > > subclass = USB > > ehci1@pci0:2:8:3: class=0x0c0320 card=0x00000000 chip=0x880f8086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T USB2 EHCI Controller' > > class = serial bus > > subclass = USB > > none4@pci0:2:10:0: class=0xff0000 card=0x00000000 chip=0x88108086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T DMA Controller' > > uart2@pci0:2:10:1: class=0x070002 card=0x00000000 chip=0x88118086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T UART Controller 0' > > class = simple comms > > subclass = UART > > uart3@pci0:2:10:2: class=0x070002 card=0x00000000 chip=0x88128086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T UART Controller 1' > > class = simple comms > > subclass = UART > > uart4@pci0:2:10:3: class=0x070002 card=0x00000000 chip=0x88138086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T UART Controller 2' > > class = simple comms > > subclass = UART > > uart5@pci0:2:10:4: class=0x070002 card=0x00000000 chip=0x88148086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T UART Controller 3' > > class = simple comms > > subclass = UART > > none5@pci0:2:12:0: class=0xff0000 card=0x00000000 chip=0x88158086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T DMA Controller' > > none6@pci0:2:12:1: class=0x0c8000 card=0x00000000 chip=0x88168086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T Serial Peripheral Interface Bus' > > class = serial bus > > none7@pci0:2:12:2: class=0x0c8000 card=0x00000000 chip=0x88178086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T I2C Controller' > > class = serial bus > > none8@pci0:2:12:3: class=0x0c0900 card=0x00000000 chip=0x88188086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T Controller Area Network (CAN) Controller' > > class = serial bus > > none9@pci0:2:12:4: class=0xff0000 card=0x00000000 chip=0x88198086 rev=0x01 hdr=0x00 > > vendor = 'Intel Corporation' > > device = 'Platform Controller Hub EG20T IEEE 1588 Hardware Assist' > > pcib4@pci0:3:0:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01 > > vendor = 'Integrated Device Technology, Inc.' > > device = 'PES4T4 PCI Express Switch' > > class = bridge > > subclass = PCI-PCI > > pcib5@pci0:4:2:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01 > > vendor = 'Integrated Device Technology, Inc.' > > device = 'PES4T4 PCI Express Switch' > > class = bridge > > subclass = PCI-PCI > > pcib6@pci0:4:3:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01 > > vendor = 'Integrated Device Technology, Inc.' > > device = 'PES4T4 PCI Express Switch' > > class = bridge > > subclass = PCI-PCI > > pcib7@pci0:4:4:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01 > > vendor = 'Integrated Device Technology, Inc.' > > device = 'PES4T4 PCI Express Switch' > > class = bridge > > subclass = PCI-PCI > > em0@pci0:5:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82574L Gigabit Network Connection' > > class = network > > subclass = ethernet > > em1@pci0:6:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82574L Gigabit Network Connection' > > class = network > > subclass = ethernet > > pcib9@pci0:8:0:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01 > > vendor = 'Integrated Device Technology, Inc.' > > device = 'PES4T4 PCI Express Switch' > > class = bridge > > subclass = PCI-PCI > > pcib10@pci0:9:2:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01 > > vendor = 'Integrated Device Technology, Inc.' > > device = 'PES4T4 PCI Express Switch' > > class = bridge > > subclass = PCI-PCI > > pcib11@pci0:9:3:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01 > > vendor = 'Integrated Device Technology, Inc.' > > device = 'PES4T4 PCI Express Switch' > > class = bridge > > subclass = PCI-PCI > > pcib12@pci0:9:4:0: class=0x060400 card=0x00000000 chip=0x803a111d rev=0x0e hdr=0x01 > > vendor = 'Integrated Device Technology, Inc.' > > device = 'PES4T4 PCI Express Switch' > > class = bridge > > subclass = PCI-PCI > > em2@pci0:10:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82574L Gigabit Network Connection' > > class = network > > subclass = ethernet > > em3@pci0:11:0:0: class=0x020000 card=0x00008086 chip=0x10d38086 rev=0x00 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82574L Gigabit Network Connection' > > class = network > > subclass = ethernet > > pcib14@pci0:13:0:0: class=0x060400 card=0x860510b5 chip=0x860510b5 rev=0xaa hdr=0x01 > > vendor = 'PLX Technology, Inc.' > > device = 'PEX 8605 PCI Express 4-port Gen2 Switch' > > class = bridge > > subclass = PCI-PCI > > pcib15@pci0:14:1:0: class=0x060400 card=0x860510b5 chip=0x860510b5 rev=0xaa hdr=0x01 > > vendor = 'PLX Technology, Inc.' > > device = 'PEX 8605 PCI Express 4-port Gen2 Switch' > > class = bridge > > subclass = PCI-PCI > > pcib16@pci0:14:2:0: class=0x060400 card=0x860510b5 chip=0x860510b5 rev=0xaa hdr=0x01 > > vendor = 'PLX Technology, Inc.' > > device = 'PEX 8605 PCI Express 4-port Gen2 Switch' > > class = bridge > > subclass = PCI-PCI > > pcib17@pci0:14:3:0: class=0x060400 card=0x860510b5 chip=0x860510b5 rev=0xaa hdr=0x01 > > vendor = 'PLX Technology, Inc.' > > device = 'PEX 8605 PCI Express 4-port Gen2 Switch' > > class = bridge > > subclass = PCI-PCI > > ath0@pci0:16:0:0: class=0x028000 card=0x3123168c chip=0x0033168c rev=0x01 hdr=0x00 > > vendor = 'Atheros Communications Inc.' > > device = 'AR9580 Wireless Network Adapter' > > class = network > > ath1@pci0:17:0:0: class=0x028000 card=0x3123168c chip=0x0033168c rev=0x01 hdr=0x00 > > vendor = 'Atheros Communications Inc.' > > device = 'AR9580 Wireless Network Adapter' > > class = network > > > > ath0: flags=8843 metric 0 mtu 2290 > > ether 04:f0:21:04:5d:7a > > nd6 options=21 > > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng > > status: running > > > > ath1: flags=8843 metric 0 mtu 2290 > > ether 04:f0:21:04:5d:65 > > nd6 options=21 > > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng > > status: running > > > > > > wlan0: flags=8943 metric 0 mtu 1500 > > ether 04:f0:21:04:5d:7a > > nd6 options=29 > > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng > > status: running > > ssid R2 channel 11 (2462 MHz 11g ht/20) bssid 04:f0:21:04:5d:7a > > regdomain FCC country CA anywhere ecm authmode WPA2/802.11i -wps -tsn > > privacy MIXED deftxkey 2 > > AES-CCM 2:128-bit > > AES-CCM 3:128-bit powersavemode OFF powersavesleep 100 txpower 30 > > txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7 > > 11a ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > > 11b ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > > 11g ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > > turboA ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > > turboG ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > > sturbo ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > > 11na ucast NONE mgmt 12 MCS mcast 12 MCS maxretry 6 > > 11ng ucast NONE mgmt 2 MCS mcast 2 MCS maxretry 6 > > half ucast NONE mgmt 3 Mb/s mcast 3 Mb/s maxretry 6 > > quarter ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > > scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250 > > roam:11a rssi 7dBm rate 12 Mb/s > > roam:11b rssi 7dBm rate 1 Mb/s > > roam:11g rssi 7dBm rate 5 Mb/s > > roam:turboA rssi 7dBm rate 12 Mb/s > > roam:turboG rssi 7dBm rate 12 Mb/s > > roam:sturbo rssi 7dBm rate 12 Mb/s > > roam:11na rssi 7dBm MCS 1 > > roam:11ng rssi 7dBm MCS 1 > > roam:half rssi 7dBm rate 6 Mb/s > > roam:quarter rssi 7dBm rate 3 Mb/s > > -pureg protmode CTS ht htcompat ampdu ampdulimit 64k ampdudensity 8 > > amsdu shortgi htprotmode RTSCTS -puren -smps -rifs wme burst -dwds > > -hidessid apbridge dtimperiod 1 doth -dfs inact bintval 100 > > AC_BE cwmin 4 cwmax 6 aifs 3 txopLimit 0 -acm ack > > cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm > > AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm ack > > cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm > > AC_VI cwmin 3 cwmax 4 aifs 1 txopLimit 94 -acm ack > > cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm > > AC_VO cwmin 2 cwmax 3 aifs 1 txopLimit 47 -acm ack > > cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm > > groups: wlan > > > > wlan1: flags=8943 metric 0 mtu 1500 > > ether 04:f0:21:04:5d:65 > > nd6 options=29 > > media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng > > status: running > > ssid R1 channel 6 (2437 MHz 11g ht/20) bssid 04:f0:21:04:5d:65 > > regdomain FCC country CA anywhere ecm authmode WPA2/802.11i -wps -tsn > > privacy MIXED deftxkey 2 > > AES-CCM 2:128-bit > > AES-CCM 3:128-bit powersavemode OFF powersavesleep 100 txpower 30 > > txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7 > > 11a ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > > 11b ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > > 11g ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > > turboA ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > > turboG ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > > sturbo ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6 > > 11na ucast NONE mgmt 12 MCS mcast 12 MCS maxretry 6 > > 11ng ucast NONE mgmt 2 MCS mcast 2 MCS maxretry 6 > > half ucast NONE mgmt 3 Mb/s mcast 3 Mb/s maxretry 6 > > quarter ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6 > > scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250 > > roam:11a rssi 7dBm rate 12 Mb/s > > roam:11b rssi 7dBm rate 1 Mb/s > > roam:11g rssi 7dBm rate 5 Mb/s > > roam:turboA rssi 7dBm rate 12 Mb/s > > roam:turboG rssi 7dBm rate 12 Mb/s > > roam:sturbo rssi 7dBm rate 12 Mb/s > > roam:11na rssi 7dBm MCS 1 > > roam:11ng rssi 7dBm MCS 1 > > roam:half rssi 7dBm rate 6 Mb/s > > roam:quarter rssi 7dBm rate 3 Mb/s > > -pureg protmode CTS ht htcompat ampdu ampdulimit 64k ampdudensity 8 > > amsdu shortgi htprotmode RTSCTS -puren -smps -rifs wme burst -dwds > > -hidessid apbridge dtimperiod 1 doth -dfs inact bintval 100 > > AC_BE cwmin 4 cwmax 6 aifs 3 txopLimit 0 -acm ack > > cwmin 4 cwmax 10 aifs 3 txopLimit 0 -acm > > AC_BK cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm ack > > cwmin 4 cwmax 10 aifs 7 txopLimit 0 -acm > > AC_VI cwmin 3 cwmax 4 aifs 1 txopLimit 94 -acm ack > > cwmin 3 cwmax 4 aifs 2 txopLimit 94 -acm > > AC_VO cwmin 2 cwmax 3 aifs 1 txopLimit 47 -acm ack > > cwmin 2 cwmax 3 aifs 2 txopLimit 47 -acm > > groups: wlan > > > > ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) > > Copyright (c) 1992-2013 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD is a registered trademark of The FreeBSD Foundation. > > FreeBSD 11.0-CURRENT #1: Wed Jan 8 20:42:57 EST 2014 > > root@ap01:/usr/obj/usr/src/sys/NET6501 amd64 > > FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 > > CPU: Genuine Intel(R) CPU @ 600MHz (600.01-MHz K8-class CPU) > > Origin = "GenuineIntel" Id = 0x20661 Family = 0x6 Model = 0x26 Stepping = 1 > > Features=0xbfe9fbff > > Features2=0x40e3bd > > AMD Features=0x20100800 > > AMD Features2=0x1 > > TSC: P-state invariant, performance statistics > > real memory = 536739840 (511 MB) > > avail memory = 496316416 (473 MB) > > MPTable: > > Event timer "LAPIC" quality 400 > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads > > cpu0 (BSP): APIC ID: 0 > > cpu1 (AP/HT): APIC ID: 1 > > ioapic0: Assuming intbase of 0 > > ioapic0 irqs 0-23 on motherboard > > random: initialized > > kbd0 at kbdmux0 > > module_register_init: MOD_LOAD (vesa, 0xffffffff80ab3c10, 0) error 19 > > ACPI BIOS Error (bug): A valid RSDP was not found (20130823/tbxfroot-223) > > ACPI: Table initialisation failed: AE_NOT_FOUND > > ACPI: Try disabling either ACPI or apic support. > > pcib0: pcibus 0 on motherboard > > pci0: on pcib0 > > pcib1: irq 16 at device 23.0 on pci0 > > pci1: on pcib1 > > pcib2: irq 16 at device 0.0 on pci1 > > pci2: on pcib2 > > pci2: at device 0.0 (no driver attached) > > pci2: at device 0.1 (no driver attached) > > pci2: at device 0.2 (no driver attached) > > ohci0: mem 0xa0000b00-0xa0000bff irq 19 at device 2.0 on pci2 > > usbus0 on ohci0 > > ohci1: mem 0xa0000c00-0xa0000cff irq 19 at device 2.1 on pci2 > > usbus1 on ohci1 > > ohci2: mem 0xa0000d00-0xa0000dff irq 19 at device 2.2 on pci2 > > usbus2 on ohci2 > > ehci0: mem 0xa0000e00-0xa0000eff irq 19 at device 2.3 on pci2 > > usbus3: EHCI version 1.0 > > usbus3 on ehci0 > > pci2: at device 2.4 (no driver attached) > > sdhci_pci0: mem 0xa0004000-0xa00041ff irq 18 at device 4.0 on pci2 > > sdhci_pci0: 1 slot(s) allocated > > sdhci_pci1: mem 0xa0004200-0xa00043ff irq 18 at device 4.1 on pci2 > > sdhci_pci1: 1 slot(s) allocated > > ahci0: port 0x1020-0x103f mem 0xa0004400-0xa00047ff irq 17 at device 6.0 on pci2 > > ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported > > ahcich0: at channel 0 on ahci0 > > ahcich1: at channel 1 on ahci0 > > ohci3: mem 0xa0004800-0xa00048ff irq 16 at device 8.0 on pci2 > > usbus4 on ohci3 > > ohci4: mem 0xa0004900-0xa00049ff irq 16 at device 8.1 on pci2 > > usbus5 on ohci4 > > ohci5: mem 0xa0004a00-0xa0004aff irq 16 at device 8.2 on pci2 > > usbus6 on ohci5 > > ehci1: mem 0xa0004b00-0xa0004bff irq 16 at device 8.3 on pci2 > > usbus7: EHCI version 1.0 > > usbus7 on ehci1 > > pci2: at device 10.0 (no driver attached) > > uart2: port 0x1040-0x1047 mem 0xa0004d00-0xa0004d0f irq 19 at device 10.1 on pci2 > > uart3: port 0x1048-0x104f mem 0xa0004d10-0xa0004d1f irq 19 at device 10.2 on pci2 > > uart4: port 0x1050-0x1057 mem 0xa0004d20-0xa0004d2f irq 19 at device 10.3 on pci2 > > uart5: port 0x1058-0x105f mem 0xa0004d30-0xa0004d3f irq 19 at device 10.4 on pci2 > > pci2: at device 12.0 (no driver attached) > > pci2: at device 12.1 (no driver attached) > > pci2: at device 12.2 (no driver attached) > > pci2: at device 12.3 (no driver attached) > > pci2: at device 12.4 (no driver attached) > > pcib3: irq 17 at device 24.0 on pci0 > > pci3: on pcib3 > > pcib4: at device 0.0 on pci3 > > pci4: on pcib4 > > pcib5: at device 2.0 on pci4 > > pci5: on pcib5 > > em0: port 0x2000-0x201f mem 0xa1000000-0xa101ffff,0xa1020000-0xa1023fff irq 19 at device 0.0 on pci5 > > em0: Using MSIX interrupts with 3 vectors > > em0: Ethernet address: 00:00:24:cf:05:30 > > pcib6: at device 3.0 on pci4 > > pci6: on pcib6 > > em1: port 0x3000-0x301f mem 0xa2000000-0xa201ffff,0xa2020000-0xa2023fff irq 16 at device 0.0 on pci6 > > em1: Using MSIX interrupts with 3 vectors > > em1: Ethernet address: 00:00:24:cf:05:31 > > pcib7: at device 4.0 on pci4 > > pci7: on pcib7 > > pcib8: irq 18 at device 25.0 on pci0 > > pci8: on pcib8 > > pcib9: at device 0.0 on pci8 > > pci9: on pcib9 > > pcib10: at device 2.0 on pci9 > > pci10: on pcib10 > > em2: port 0x4000-0x401f mem 0xa3000000-0xa301ffff,0xa3020000-0xa3023fff irq 16 at device 0.0 on pci10 > > em2: Using MSIX interrupts with 3 vectors > > em2: Ethernet address: 00:00:24:cf:05:32 > > pcib11: at device 3.0 on pci9 > > pci11: on pcib11 > > em3: port 0x5000-0x501f mem 0xa4000000-0xa401ffff,0xa4020000-0xa4023fff irq 17 at device 0.0 on pci11 > > em3: Using MSIX interrupts with 3 vectors > > em3: Ethernet address: 00:00:24:cf:05:33 > > pcib12: at device 4.0 on pci9 > > pci12: on pcib12 > > pcib13: irq 19 at device 26.0 on pci0 > > pci13: on pcib13 > > pcib14: mem 0xa5000000-0xa5003fff irq 19 at device 0.0 on pci13 > > pci14: on pcib14 > > pcib15: irq 16 at device 1.0 on pci14 > > pci15: on pcib15 > > pcib16: irq 17 at device 2.0 on pci14 > > pci16: on pcib16 > > ath0: mem 0xa6000000-0xa601ffff irq 17 at device 0.0 on pci16 > > ar9300_set_stub_functions: setting stub functions > > ar9300_set_stub_functions: setting stub functions > > ar9300_attach: calling ar9300_hw_attach > > ar9300_hw_attach: calling ar9300_eeprom_attach > > ar9300_flash_map: unimplemented for now > > Restoring Cal data from DRAM > > Restoring Cal data from EEPROM > > ar9300_hw_attach: ar9300_eeprom_attach returned 0 > > ath0: RX status length: 48 > > ath0: RX buffer size: 4096 > > ath0: TX descriptor length: 128 > > ath0: TX status length: 36 > > ath0: TX buffers per descriptor: 4 > > ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0 > > ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries > > ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries > > ath0: [HT] enabling HT modes > > ath0: [HT] enabling short-GI in 20MHz mode > > ath0: [HT] 1 stream STBC receive enabled > > ath0: [HT] 1 stream STBC transmit enabled > > ath0: [HT] 3 RX streams; 3 TX streams > > ath0: AR9580 mac 448.4 RF5110 phy 3661.5 > > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > > pcib17: irq 18 at device 3.0 on pci14 > > pci17: on pcib17 > > ath1: mem 0xa7000000-0xa701ffff irq 18 at device 0.0 on pci17 > > ar9300_set_stub_functions: setting stub functions > > ar9300_set_stub_functions: setting stub functions > > ar9300_attach: calling ar9300_hw_attach > > ar9300_hw_attach: calling ar9300_eeprom_attach > > ar9300_flash_map: unimplemented for now > > Restoring Cal data from DRAM > > Restoring Cal data from EEPROM > > ar9300_hw_attach: ar9300_eeprom_attach returned 0 > > ath1: RX status length: 48 > > ath1: RX buffer size: 4096 > > ath1: TX descriptor length: 128 > > ath1: TX status length: 36 > > ath1: TX buffers per descriptor: 4 > > ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0 > > ath1: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries > > ath1: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries > > ath1: [HT] enabling HT modes > > ath1: [HT] enabling short-GI in 20MHz mode > > ath1: [HT] 1 stream STBC receive enabled > > ath1: [HT] 1 stream STBC transmit enabled > > ath1: [HT] 3 RX streams; 3 TX streams > > ath1: AR9580 mac 448.4 RF5110 phy 1083.4 > > ath1: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > > isab0: at device 31.0 on pci0 > > isa0: on isab0 > > cpu0 on motherboard > > est0: on cpu0 > > est: CPU supports Enhanced Speedstep, but is not recognized. > > est: cpu_vendor GenuineIntel, msr 60706070600060a > > device_attach: est0 attach returned 6 > > p4tcc0: on cpu0 > > cpu1 on motherboard > > est1: on cpu1 > > est: CPU supports Enhanced Speedstep, but is not recognized. > > est: cpu_vendor GenuineIntel, msr 60706070600060a > > device_attach: est1 attach returned 6 > > p4tcc1: on cpu1 > > atrtc0: at port 0x70 irq 8 on isa0 > > Event timer "RTC" frequency 32768 Hz quality 0 > > attimer0: at port 0x40 on isa0 > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > Event timer "i8254" frequency 1193182 Hz quality 100 > > ppc0: cannot reserve I/O port range > > uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > uart0: console (9600,n,8,1) > > est0: on cpu0 > > est: CPU supports Enhanced Speedstep, but is not recognized. > > est: cpu_vendor GenuineIntel, msr 60706070600060a > > device_attach: est0 attach returned 6 > > est1: on cpu1 > > est: CPU supports Enhanced Speedstep, but is not recognized. > > est: cpu_vendor GenuineIntel, msr 60706070600060a > > device_attach: est1 attach returned 6 > > Timecounters tick every 1.000 msec > > random: unblocking device. > > usbus0: 12Mbps Full Speed USB v1.0 > > usbus1: 12Mbps Full Speed USB v1.0 > > ugen0.1: <0x8086> at usbus0 > > uhub0: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > > ugen1.1: <0x8086> at usbus1 > > uhub1: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > > usbus2: 12Mbps Full Speed USB v1.0 > > usbus3: 480Mbps High Speed USB v2.0 > > ugen2.1: <0x8086> at usbus2 > > uhub2: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > > ugen3.1: at usbus3 > > uhub3: on usbus3 > > usbus4: 12Mbps Full Speed USB v1.0 > > uhub0: 1 port with 1 removable, self powered > > ugen4.1: <0x8086> at usbus4 > > uhub4: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > > uhub1: 1 port with 1 removable, self powered > > usbus5: 12Mbps Full Speed USB v1.0 > > uhub2: 1 port with 1 removable, self powered > > ugen5.1: <0x8086> at usbus5 > > uhub5: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > > usbus6: 12Mbps Full Speed USB v1.0 > > usbus7: 480Mbps High Speed USB v2.0 > > ugen6.1: <0x8086> at usbus6 > > uhub6: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > > uhub4: 1 port with 1 removable, self powered > > ugen7.1: at usbus7 > > uhub7: on usbus7 > > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > > uhub5: 1 port with 1 removable, self powered > > ada0: uhub6: 1 port with 1 removable, self powered > > ATA-8 SATA 2.x device > > ada0: Serial Number 02512013500300001076 > > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > > ada0: Command Queueing enabled > > ada0: 28626MB (58626288 512 byte sectors: 16H 63S/T 16383C) > > ada0: Previously was known as ad4 > > SMP: AP CPU #1 Launched! > > Timecounter "TSC" frequency 600012906 Hz quality 1000 > > Root mount waiting for: usbus7 usbus3 > > uhub3: 3 ports with 3 removable, self powered > > uhub7: 3 ports with 3 removable, self powered > > Trying to mount root from ufs:/dev/ada0p2 [rw]... > > bridge0: Ethernet address: 02:b1:ae:74:0b:00 > > wlan0: Ethernet address: 04:f0:21:04:5d:7a > > ath0: stuck beacon; resetting (bmiss count 4) > > ath0: stuck beacon; resetting (bmiss count 0) > > wlan1: Ethernet address: 04:f0:21:04:5d:65 > > > > If anyone has an idea on what is wrong or what needs to be > > reported/tested to find out and fix this please let me know. > > > > -- > > -- > > ===================================================== > > Christophe Prevotaux > > Email: c.prevotaux@rural-networks.com > > Tel : +33 06 79 11 86 58 > > ===================================================== > > > > _______________________________________________ > > freebsd-wireless@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org" -- -- ===================================================== Christophe Prevotaux Email: c.prevotaux@rural-networks.com Tel : +33 06 79 11 86 58 =====================================================