Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 3 Dec 1999 09:53:53 +1000
From:      Phil Homewood <philh@mincom.com>
To:        Paul Reece <paul@pulsat.com.au>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: cam scsi and adaptec 7890/91
Message-ID:  <19991203095353.I15959@mincom.com>
In-Reply-To: <Pine.BSF.4.20.9912011548580.3094-100000@koala.pulsat.com.au>; from Paul Reece on Wed, Dec 01, 1999 at 03:56:45PM %2B0800
References:  <Pine.BSF.4.20.9912011548580.3094-100000@koala.pulsat.com.au>

next in thread | previous in thread | raw e-mail | index | archive | help
Paul Reece wrote:
> da0: 11.626MB/s transfers (5.813MHz, offset 31, 16bit), Tagged Queueing
> Enabled
> 
> Anyone have any pointers as to why I'm getting only 11.6meg transfers
> reported upon boot when the drives and the SCSI BUS is capable of
> 80??  The devices ARE LVD/Ultra2 drives..  (same in both machines, except
> one set are SCA)

Check your Adaptec BIOS settings for these devices. I'm willing to bet
your card is configured to use a slower transfer speed.
-- 
This transmission is for the intended addressee only and is confidential
information. If you have received this transmission in error, please delete
it and notify the sender. The contents of this email are the opinion of the
writer and are not endorsed by Mincom Ltd unless expressly stated otherwise.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991203095353.I15959>