Date: Tue, 9 Apr 2002 16:27:03 +0300 From: Eugene Perevyazko <john@pcs.dp.ua> To: freebsd-mobile@FreeBSD.ORG Subject: wi tx-rate is set incorrectly with ifconfig Message-ID: <20020409162703.A26943@pcs.dp.ua>
next in thread | raw e-mail | index | archive | help
--qDbXVdCdHGoSgWSk
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi there.
Abstract:
wi driver tx-rate for Lucent chipset is set incorrectly by ifconfig
'media DSx' option.
To confirm:
ifconfig wi0 media DS11
wicontrol
wicontrol reports not 11 but most probably 2 Mbit/s
Details:
I've moved to setting all wi params with ifconfig through /etc/rc.conf
some time ago just like that:
ifconfig_wi0="inet 1.2.3.4 netmask 0xfffffff0 \
nwkey 1:key01,key02,key03,key04 media DS11 \
station MyFineBox ssid MyFineNet"
Then noticed that wicontrol reports wrong tx-rate value.
A glimpse at the source shows that code in wi_media_change() in if_wi.c:
switch (IFM_SUBTYPE(sc->ifmedia.ifm_cur->ifm_media)) {
case IFM_IEEE80211_DS1:
sc->wi_tx_rate = 1;
break;
case IFM_IEEE80211_DS2:
sc->wi_tx_rate = 2;
break;
case IFM_IEEE80211_DS5:
sc->wi_tx_rate = 5;
break;
case IFM_IEEE80211_DS11:
sc->wi_tx_rate = 11;
break;
case IFM_AUTO:
sc->wi_tx_rate = 3;
break;
}
Then those values are translated for Prism2 in wi_write_record() but go
unchanged for Lucent. Poor me!
The Prism2 gets those translated as:
case WI_RID_TX_RATE:
p2ltv.wi_type = WI_RID_TX_RATE;
p2ltv.wi_len = 2;
switch (ltv->wi_val) {
case 1: p2ltv.wi_val = 1; break;
case 2: p2ltv.wi_val = 2; break;
case 3: p2ltv.wi_val = 15; break;
case 5: p2ltv.wi_val = 4; break;
case 6: p2ltv.wi_val = 3; break;
case 7: p2ltv.wi_val = 7; break;
case 11: p2ltv.wi_val = 8; break;
default: return EINVAL;
}
ltv = &p2ltv;
break;
So I think that Lucent should get values translated the following way:
switch (ltv->wi_val) {
case 1: p2ltv.wi_val = 1; break;/* 1Mb/s fixed */
case 2: p2ltv.wi_val = 2; break;/* 2Mb/s fixed */
case 3: p2ltv.wi_val = 3; break;/* 11Mb/s auto */
case 5: p2ltv.wi_val = 4; break;/* 5.5Mb/s fixed */
case 6: p2ltv.wi_val = 6; break;/* 2Mb/s auto */
case 7: p2ltv.wi_val = 7; break;/* 5.5Mb/s auto */
case 11: p2ltv.wi_val = 5; break;/* 11Mb/s fixed */
default: return EINVAL;
}
(I deduced the values from man wicontrol)
I've made a little patch and tried it. My Orinoco is happy now! :)
The patch is attached.
--
Eugene Perevyazko
--qDbXVdCdHGoSgWSk
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="tx_rate.patch"
*** if_wi.c.orig Tue Aug 28 09:21:14 2001
--- if_wi.c Tue Apr 9 15:39:13 2002
***************
*** 1045,1054 ****
--- 1045,1070 ----
}
return 0;
}
}
}
+ else { /* not Prism, Lucent for ex. */
+ switch (ltv->wi_type) {
+ case WI_RID_TX_RATE:
+ switch (ltv->wi_val) {
+ case 1: ltv->wi_val = 1; break; /* 1Mb/s fixed */
+ case 2: ltv->wi_val = 2; break; /* 2Mb/s fixed */
+ case 3: ltv->wi_val = 3; break; /* 11Mb/s auto */
+ case 5: ltv->wi_val = 4; break; /* 5.5Mb/s fixed */
+ case 6: ltv->wi_val = 6; break; /* 2Mb/s auto */
+ case 7: ltv->wi_val = 7; break; /* 5.5Mb/s auto */
+ case 11: ltv->wi_val = 5; break; /* 11Mb/s fixed */
+ default: return EINVAL;
+ }
+ break;
+ }
+ }
if (wi_seek(sc, ltv->wi_type, 0, WI_BAP1))
return(EIO);
CSR_WRITE_2(sc, WI_DATA1, ltv->wi_len);
--qDbXVdCdHGoSgWSk--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020409162703.A26943>