Date: Wed, 03 Nov 2004 19:18:25 +0100 From: Palle Girgensohn <girgen@pingpong.net> To: freebsd-scsi@freebsd.org Subject: Re: HP DLT VS80 says EOT immediately? Message-ID: <D8C131D849709715C85DBF8C@rambutan.pingpong.net> In-Reply-To: <48F9F0FB4D0BB5C49845B31C@rambutan.pingpong.net> References: <48F9F0FB4D0BB5C49845B31C@rambutan.pingpong.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Sorry, found the very simple answer myself, I need to do some mt wizardry
to reset density of the tapes (they where previously used with a 20 GB
taper).
Regards,
Palle
--On Wednesday, November 03, 2004 18:35:58 +0100 Palle Girgensohn
<girgen@pingpong.net> wrote:
> Hi!
>
> Just bought a new DLT device, and it won't play with me:
>
> dmesg:
> sa1 at ahc2 bus 0 target 6 lun 0
> sa1: <HP DLT VS80 5E40> Removable Sequential Access SCSI-2 device
> sa1: 10.000MB/s transfers (10.000MHz, offset 15)
>
>
># dump 0af /dev/rsa1 /
> DUMP: Date of this level 0 dump: Wed Nov 3 18:30:59 2004
> DUMP: Date of last level 0 dump: the epoch
> DUMP: Dumping /dev/da0s1a (/) to /dev/rsa1
> DUMP: mapping (Pass I) [regular files]
> DUMP: mapping (Pass II) [directories]
> DUMP: estimated 90713 tape blocks.
> DUMP: dumping (Pass III) [directories]
> DUMP: End of tape detected
> DUMP: Closing /dev/rsa1
> DUMP: Change Volumes: Mount volume #2
> DUMP: Is the new volume mounted and ready to go?: ("yes" or "no") yes
> DUMP: Volume 2 begins with blocks from inode 0
> DUMP: EOT detected at start of the tape!
> DUMP: The ENTIRE dump is aborted.
>
>
>
> Nov 3 18:30:59 banan /kernel: (sa1:ahc2:0:6:0): WRITE FILEMARKS. CDB: 10
> 0 0 0 2 0
> Nov 3 18:30:59 banan /kernel: (sa1:ahc2:0:6:0): DATA PROTECT asc:27,82
> Nov 3 18:30:59 banan /kernel: (sa1:ahc2:0:6:0): Vendor Specific ASCQ
> Nov 3 18:30:59 banan /kernel: (sa1:ahc2:0:6:0): failed to write
> terminating filemark(s)
> Nov 3 18:31:03 banan /kernel: (sa1:ahc2:0:6:0): WRITE FILEMARKS. CDB: 10
> 0 0 0 2 0
> Nov 3 18:31:03 banan /kernel: (sa1:ahc2:0:6:0): DATA PROTECT asc:27,82
> Nov 3 18:31:03 banan /kernel: (sa1:ahc2:0:6:0): Vendor Specific ASCQ
> Nov 3 18:31:03 banan /kernel: (sa1:ahc2:0:6:0): failed to write
> terminating filemark(s)
>
>
> If finds end of tape immediately? How come? This is on FreeBSD 4.10. Is
> it possible that the tape device is not supported? Is there a patch for
> this?
>
> /Palle
>
> _______________________________________________
> freebsd-scsi@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D8C131D849709715C85DBF8C>