Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 21 Dec 2002 04:34:55 +0100
From:      Jens Rehsack <rehsack@liwing.de>
To:        Muhannad Asfour <muhannad07@cogeco.ca>
Cc:        current@FreeBSD.ORG
Subject:   Re: mod_php4 4.2.3 under 5.0-CURRENT
Message-ID:  <3E03E15F.8060108@liwing.de>
References:  <000001c2a89b$c4561bd0$6401a8c0@winxp>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Muhannad Asfour wrote:
> Here's the dmesg output:
> 
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of tie University of California. All rights
> reserved.
> FreeBSD 5.0-CURRENT #0: Fri Dec 20 00:32:59 EST 2002\M^J
> root@qubix.ca:/usr/src/sys/I386/compile/QUBIX
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0520000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05200a8.
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 2394014604 Hz
> CPU: Pentium 4 (2394.01-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>  
> Features=0xffffffffbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,
> MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
> ,<b31>>
> real memory  = 536854528 (511 MB)
> avail memory = 516100096 (492 MB)
> Initializing GEOMetry subsystem
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <ASUS   P4S533  > on motherboard
>     ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
> Using $PIR table, 10 entries at 0xc00f1b20
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-fast"  frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <SIS Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at
> device 0.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI"PCI bus> on pcib1\^Zisab0: <PCI-ISA bridge> at device 2.0 on
> pci0
> isa0: <ISA bus> on isab0
> ohci0: <SiS 5571 USB controller> mem 0xf7800000-0xf7800fff irq 10 at
> device 2.2 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: <SiS 5571 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <SiS 5571 USB controller> mem 0xf7000000-0xf7000fff irq 5 at
> device 2.3 on pci0
> usb1: OHCI version!1.0, legacy support
> usb1: <SiS 5571 USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> atapci0: <SiS 5591 ATA33 controller> port 0xd800-0xd80f at device 2.5(on
> pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> sis0: <SiS 900 10/100BaseTX> port 0xb000-0xb0ff mem
> 0xf6800000-0xf6800fff irq 12 at device 3.0 on pci0
> sis0: Ethernet address: 00:e0:18:ab:17:b8
> sis0: MII without any PHY!
> device_probe_and_attach: sis0 attach returned 6
> pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 11 at device 5.0 on pci0
> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa400-0xa47f mem
> 0xf6000000-0xf600007f irq 11 at device 9.0 on pci0
> xl0: Ethernet address: 00:01:02:84:e3:7e
> miibus0: <MII bus> on xl0
> xlphy0: <3c905C 10/100 internal PHY> on miibus0
> xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fdc0: <Enhanced floppy controller"(i82077, NE72065 os clone)> port
> 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes vhreshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> tlip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A, console
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0y60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> orm0: <Option ROM> at iomem 0xc8000-0xc87ff on isa0
> pmtimer0 on isa0
> Timecounters tick every 10.000 msec
> acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
> ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA33
> ad1: 38182MB <MAXTOR 4K040H2> [77578/16/63] at ata0-slave UDMA33
> acd0: CDROM <HL-DT-ST$CD-ROM GCR-8520B> at ata1-master PIO\M-4
> Mounting root from ufs:/dev/ad0s1a
> Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
> Waiting (max 60 seconds) for system process `bufdaemon' to
> stop...stopped
> Waiting (max 60 seconds) for system process `syncer' to stop...stopped
> 
> syncing disks, buffers remaining... 8 8 
> done
> Uptime: 36s
> Power system off using ACPI...
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights
> reserved.
> FreeBSD 5.0-CURRENT #0: Fri Dec 20 00:32:59 EST 2002
>     root@qubix.ca:/usr/src/sys/i386/compile/QUBIX
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0520000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05200a8.
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 2394010816 Hz
> CPU: Pentium 4 (2394.01-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>  
> Features=0xffffffffbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,
> MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
> ,<b31>>
> real memory  = 536854528 (511 MB)
> avail memory = 515989504 (492 MB)
> Initializing GEOMetry subsystem
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <ASUS   P4S533  > on motherboard
>     ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
> Using $PIR table, 10 entries at 0xc00f1b20
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-fast"  frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <SIS Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at
> device 0.0 on pci0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 2.0 on pci0
> isa0: <ISA bus> on isab0
> ohci0: <SiS 5571 USB controller> mem 0xef000000-0xef000fff irq 12 at
> device 2.2 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: <SiS 5571 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <SiS 5571 USB controller> mem 0xee800000-0xee800fff irq 9 at
> device 2.3 on pci0
> usb1: OHCI version 1.0, legacy support
> usb1: <SiS 5571 USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> atapci0: <SiS 5591 ATA33 controller> port 0xb800-0xb80f at device 2.5 on
> pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> sis0: <SiS 900 10/100BaseTX> port 0xa000-0xa0ff mem
> 0xee000000-0xee000fff irq 5 at device 3.0 on pci0
> sis0: Ethernet address: 00:e0:18:ab:17:b8
> sis0: MII without any PHY!
> device_probe_and_attach: sis0 attach returned 6
> pcm0: <CMedia CMI8738> port 0x9800-0x98ff irq 10 at device 5.0 on pci0
> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9400-0x947f mem
> 0xed800000-0xed80007f irq 10 at device 9.0 on pci0
> xl0: Ethernet address: 00:01:02:84:e3:7e
> miibus0: <MII bus> on xl0
> xlphy0: <3c905C 10/100 internal PHY> on miibus0
> xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
> 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> Timecounters tick every 10.000 msec
> acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
> ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA33
> ad1: 38182MB <MAXTOR 4K040H2> [77578/16/63] at ata0-slave UDMA33
> acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B> at ata1-master PIO4
> Mounting root from ufs:/dev/ad0s1a
> lock order reversal
> 
> 
> Here's the mod_php4 build process:
> 
> Script started on Fri Dec 20 21:49:13 2002
> Define WITH_APACHE2 to build mod_php4 as an apache2 module.
> 
> 
> 
> ===>  Extracting for mod_php4-4.2.3
> 
> Define WITH_APACHE2 to build mod_php4 as an apache2 module.
> 
> 
> 
> 
>>>Checksum OK for php-4.2.3.tar.bz2.
>>
> 
> ===>   mod_php4-4.2.3 depends on file: /usr/local/sbin/apxs - found
> 
> ===>   mod_php4-4.2.3 depends on file:
> /usr/local/libexec/autoconf213/autoconf - found
> 
> ===>   mod_php4-4.2.3 depends on shared library: mysqlclient.10 - found
> 
> ===>  Patching for mod_php4-4.2.3
> 
> ===>  Applying FreeBSD patches for mod_php4-4.2.3
> 
> ===>  Configuring for mod_php4-4.2.3
> 
> configure.in:526: warning: AC_TRY_RUN called without default to allow
> cross compiling
> 
> ext/imap/config.m4:168: warning: AC_TRY_RUN called without default to
> allow cross compiling
> 
> ext/qtdom/config.m4:34: AC_PROG_CXXCPP was called before AC_PROG_CXX
> 
> ext/session/config.m4:30: warning: AC_TRY_RUN called without default to
> allow cross compiling
> 
> ext/session/config.m4:31: warning: AC_TRY_RUN called without default to
> allow cross compiling
> 
> ext/xml/config.m4:8: warning: AC_TRY_RUN called without default to allow
> cross compiling
> 
> creating cache ./config.cache
> 
> checking for Cygwin environment... no
> 
> checking for mingw32 environment... no
> 
> checking host system type... i386-portbld-freebsd5.0
> 
> checking for a BSD compatible install... /usr/bin/install -c -o root -g
> wheel
> 
> checking whether build environment is sane... yes
> 
> checking whether make sets ${MAKE}... yes
> 
> checking for working aclocal... missing
> 
> checking for working autoconf... found
> 
> checking for working automake... missing
> 
> checking for working autoheader... found
> 
> checking for working makeinfo... found
> 
> checking whether to enable maintainer-specific portions of Makefiles...
> no
> 
> Updated php_version.h
> 
> checking for gcc... cc
> 
> checking whether the C compiler (cc -O -pipe -march=pentium4
> -I/usr/local/include ) works... yes
> 
> checking whether the C compiler (cc -O -pipe -march=pentium4
> -I/usr/local/include ) is a cross-compiler... no
> 
> checking whether we are using GNU C... yes
> 
> checking whether cc accepts -g... yes
> 
> checking whether cc understands -c and -o together... yes
> 
> checking how to run the C preprocessor... cc -E
> 
> checking for AIX... no
> 
> checking for cc option to accept ANSI C... none needed
> 
> checking whether compiler supports -R... yes
> 
> checking for ranlib... ranlib
> 
> checking whether ln -s works... yes
> 
> checking for mawk... no
> 
> checking for gawk... no
> 
> checking for nawk... nawk
> 
> checking for bison... bison -y
> 
> checking bison version... 1.75 (ok)
> 
> checking for flex... flex
> 
> checking for yywrap in -lfl... yes
> 
> checking lex output file root... lex.yy
> 
> checking whether yytext is a pointer... yes
> 
> checking for working const... yes
> 
> checking for pthreads_cflags... -pthread
> 
> checking for pthreads_lib... 
> 
> 
> 
> Configuring SAPI modules
> 
> checking for AOLserver support... no
> 
> checking for Apache 1.x module support via DSO through APXS... yes
> 
> checking for mod_charset compatibility option... no
> 
> checking for Apache 2.0 module support via DSO through APXS... no
> 
> checking for Caudium support... no
> 
> checking for fhttpd module support... no
> 
> checking for CLI build... no
> 
> checking for FastCGI support... no
> 
> checking for Zeus ISAPI support... no
> 
> checking for NSAPI support... no
> 
> checking for PHTTPD support... no
> 
> checking for Pi3Web Support... no
> 
> checking for Roxen/Pike support... no
> 
> checking for Servlet support... no
> 
> checking for thttpd... no
> 
> checking for TUX... no
> 
> checking for webjames... no
> 
> checking for chosen SAPI module... apache
> 
> 
> 
> Running system checks
> 
> checking for missing declarations of reentrant functions... done
> 
> checking for sendmail... /usr/sbin/sendmail
> 
> checking whether system uses EBCDIC... no
> 
> checking for socket in -lsocket... no
> 
> checking for htonl in -lsocket... no
> 
> checking for yp_get_default_domain... yes
> 
> checking for dlopen in -ldl... no
> 
> checking for sin in -lm... yes
> 
> checking for inet_aton in -lresolv... no
> 
> checking for inet_aton in -lbind... no
> 
> checking for __inet_aton in -lbind... no
> 
> checking for res_search in -lsocket... no
> 
> checking for res_search in -lresolv... no
> 
> checking for dn_skipname in -lresolv... no
> 
> checking for __dn_skipname in -lresolv... no
> 
> checking for ANSI C header files... no
> 
> checking for dirent.h that defines DIR... yes
> 
> checking for opendir in -ldir... no
> 
> checking for fclose declaration... ok
> 
> checking for ApplicationServices/ApplicationServices.h... no
> 
> checking for alloca.h... no
> 
> checking for arpa/inet.h... no
> 
> checking for arpa/nameser.h... no
> 
> checking for crypt.h... no
> 
> checking for fcntl.h... no
> 
> checking for grp.h... no
> 
> checking for ieeefp.h... no
> 
> checking for langinfo.h... no
> 
> checking for limits.h... no
> 
> checking for locale.h... no
> 
> checking for netinet/in.h... no
> 
> checking for pwd.h... no
> 
> checking for resolv.h... no
> 
> checking for signal.h... no
> 
> checking for stdarg.h... no
> 
> checking for stdlib.h... no
> 
> checking for string.h... no
> 
> checking for syslog.h... no
> 
> checking for sysexits.h... no
> 
> checking for sys/file.h... no
> 
> checking for sys/mman.h... no
> 
> checking for sys/mount.h... no
> 
> checking for sys/resource.h... no
> 
> checking for sys/select.h... no
> 
> checking for sys/socket.h... no
> 
> checking for sys/statfs.h... no
> 
> checking for sys/statvfs.h... no
> 
> checking for sys/vfs.h... no
> 
> checking for sys/sysexits.h... no
> 
> checking for sys/time.h... no
> 
> checking for sys/types.h... no
> 
> checking for sys/varargs.h... no
> 
> checking for sys/wait.h... no
> 
> checking for unistd.h... no
> 
> checking for unix.h... no
> 
> checking for utime.h... no
> 
> checking whether struct tm is in sys/time.h or time.h... time.h
> 
> checking for tm_zone in struct tm... yes
> 
> checking for tm_gmtoff in struct tm... yes
> 
> checking for struct flock... yes
> 
> checking for socklen_t... yes
> 
> checking size of long... 4
> 
> checking size of int... 4
> 
> checking for st_blksize in struct stat... yes
> 
> checking for st_blocks in struct stat... yes
> 
> checking for st_rdev in struct stat... yes
> 
> checking for size_t... yes
> 
> checking for uid_t in sys/types.h... yes
> 
> checking for struct sockaddr_storage... yes
> 
> checking for IPv6 support... yes
> 
> checking for vprintf... yes
> 
> checking for asctime_r... yes
> 
> checking for chroot... yes
> 
> checking for ctime_r... yes
> 
> checking for cuserid... no
> 
> checking for crypt... no
> 
> checking for flock... yes
> 
> checking for gai_strerror... yes
> 
> checking for gcvt... no
> 
> checking for getlogin... yes
> 
> checking for gethostbyaddr... yes
> 
> checking for getprotobyname... yes
> 
> checking for getprotobynumber... yes
> 
> checking for getservbyname... yes
> 
> checking for getservbyport... yes
> 
> checking for getrusage... yes
> 
> checking for gettimeofday... yes
> 
> checking for gmtime_r... yes
> 
> checking for inet_aton... yes
> 
> checking for isascii... yes
> 
> checking for link... yes
> 
> checking for localtime_r... yes
> 
> checking for lockf... yes
> 
> checking for lrand48... yes
> 
> checking for memcpy... yes
> 
> checking for memmove... yes
> 
> checking for mkstemp... yes
> 
> checking for mmap... yes
> 
> checking for nl_langinfo... yes
> 
> checking for putenv... yes
> 
> checking for realpath... yes
> 
> checking for random... yes
> 
> checking for rand_r... yes
> 
> checking for regcomp... yes
> 
> checking for res_search... yes
> 
> checking for setitimer... yes
> 
> checking for setlocale... yes
> 
> checking for localeconv... yes
> 
> checking for setsockopt... yes
> 
> checking for setvbuf... yes
> 
> checking for shutdown... yes
> 
> checking for sin... yes
> 
> checking for snprintf... yes
> 
> checking for srand48... yes
> 
> checking for srandom... yes
> 
> checking for statfs... yes
> 
> checking for statvfs... yes
> 
> checking for std_syslog... no
> 
> checking for strcasecmp... yes
> 
> checking for strcoll... yes
> 
> checking for strdup... yes
> 
> checking for strerror... yes
> 
> checking for strftime... yes
> 
> checking for strstr... yes
> 
> checking for strtok_r... yes
> 
> checking for symlink... yes
> 
> checking for tempnam... yes
> 
> checking for tzset... yes
> 
> checking for unsetenv... yes
> 
> checking for usleep... yes
> 
> checking for utime... yes
> 
> checking for vsnprintf... yes
> 
> checking for getaddrinfo... yes
> 
> checking for strlcat... yes
> 
> checking for strlcpy... yes
> 
> checking for getopt... yes
> 
> checking whether utime accepts a null argument... yes
> 
> checking for working alloca.h... (cached) no
> 
> checking for alloca... yes
> 
> checking whether sprintf is broken... no
> 
> checking for declared timezone... yes
> 
> checking for type of reentrant time-related functions... POSIX
> 
> checking for readdir_r... yes
> 
> checking for type of readdir_r... POSIX
> 
> checking whether to include debugging symbols... no
> 
> checking layout of installed files... yes
> 
> checking path to configuration file... yes
> 
> checking whether to install PEAR, and where... yes
> 
> checking whether to enable safe mode by default... no
> 
> checking for safe mode exec dir... /usr/local/php/bin
> 
> checking for OpenSSL support... no
> 
> checking whether to enable PHP's own SIGCHLD handler... no
> 
> checking whether to enable magic quotes by default... no
> 
> checking whether to enable runpaths... yes
> 
> checking whether to explicitly link against libgcc... no
> 
> checking whether to enable short tags by default... yes
> 
> checking whether to enable dmalloc... no
> 
> checking for crypt in -lcrypt... yes
> 
> 
> 
> Configuring extensions
> 
> checking if the location of ZLIB install directory is defined... no
> 
> checking for ZLIB support... yes
> 
> checking for gzgets in -lz... yes
> 
> checking for fopencookie... no
> 
> checking for ASPELL support... no
> 
> checking whether to enable bc style precision math functions... no
> 
> checking for BZip2 support... no
> 
> checking whether to enable calendar conversion support... no
> 
> checking for CCVS support... no
> 
> checking for cpdflib support... no
> 
> checking for CRACKlib support... no
> 
> checking whether to enable ctype functions... yes
> 
> checking for CURL support... no
> 
> checking for CyberCash support... no
> 
> checking for cybermut support... no
> 
> checking for cyrus imap support... no
> 
> checking for xDBM support... no
> 
> checking whether to enable DBA... no
> 
> checking for GDBM support... no
> 
> checking for NDBM support... no
> 
> checking for Berkeley DB2 support... no
> 
> checking for Berkeley DB3 support... no
> 
> checking for DBM support... no
> 
> checking for CDB support... no
> 
> checking whether to enable DBA interface... no
> 
> checking whether to enable dbase support... no
> 
> checking for dbplus support... no
> 
> checking whether to enable dbx support... no
> 
> checking whether to enable direct I/O support... no
> 
> checking for DOM support... no
> 
> checking for DOM XSLT support... no
> 
> checking for DOM EXSLT support... no
> 
> checking whether to enable EXIF support... no
> 
> checking for FrontBase SQL92 (fbsql) support... no
> 
> checking for FDF support... no
> 
> checking whether to enable the bundled filePro support... no
> 
> checking for FriBidi support... no
> 
> checking whether to enable FTP support... no
> 
> checking for GD support... no
> 
> checking for GNU gettext support... no
> 
> checking for GNU MP support... no
> 
> checking for Hyperwave support... no
> 
> checking for ICAP support... no
> 
> checking for iconv support... no
> 
> checking for IMAP support... no
> 
> checking for Informix support... no
> 
> checking for Ingres II support... no
> 
> checking for InterBase support... no
> 
> checking for IRCG support... no
> 
> checking for Java support... no
> 
> checking for LDAP support... no
> 
> checking whether to enable multibyte string support... no
> 
> checking whether to enable japanese encoding translation... no
> 
> checking whether to enable multibyte regex support... no
> 
> checking for MCAL support... no
> 
> checking for mcrypt support... no
> 
> checking for MCVE support... no
> 
> checking for mhash support... no
> 
> checking for MING support... no
> 
> checking for mnoGoSearch support... no
> 
> checking for msession support... no
> 
> checking for mSQL support... no
> 
> checking for Muscat support... no
> 
> checking for MySQL support... yes
> 
> checking size of char... 1
> 
> checking size of int... (cached) 4
> 
> checking size of long... (cached) 4
> 
> checking size of long long... 8
> 
> checking for size_t... (cached) yes
> 
> checking whether time.h and sys/time.h may both be included... yes
> 
> checking for uid_t in sys/types.h... (cached) yes
> 
> checking for type ulong... no
> 
> checking for type uchar... no
> 
> checking for type uint... yes
> 
> checking for type ushort... yes
> 
> checking for int8... no
> 
> checking base type of last arg to accept... socklen_t
> 
> checking return type of qsort... void
> 
> checking for mysql_close in -lmysqlclient... yes
> 
> checking for MySQL UNIX socket... /tmp/mysql.sock
> 
> checking for ncurses support... no
> 
> checking for Oracle-OCI8 support... no
> 
> checking for Adabas support... no
> 
> checking for SAP DB support... no
> 
> checking for Solid support... no
> 
> checking for IBM DB2 support... no
> 
> checking for Empress support... no
> 
> checking for Empress local access support... no
> 
> checking for Birdstep support... no
> 
> checking for a custom ODBC support... no
> 
> checking for iODBC support... no
> 
> checking for Easysoft ODBC-ODBC Bridge support... no
> 
> checking for unixODBC support... no
> 
> checking for OpenLink ODBC support... no
> 
> checking for DBMaker support... no
> 
> checking for Oracle-ORACLE support... no
> 
> checking whether to enable user-space object overloading support... no
> 
> checking for Ovrimos SQL Server support... no
> 
> checking whether to enable pcntl support... no
> 
> checking for PCRE support... yes
> 
> checking for memmove... (cached) yes
> 
> checking for PDFlib support... no
> 
> checking for Verisign Payflow Pro support... no
> 
> checking for PostgreSQL support... no
> 
> checking whether to enable POSIX-like functions... yes
> 
> checking for seteuid... yes
> 
> checking for setegid... yes
> 
> checking for setsid... yes
> 
> checking for getsid... yes
> 
> checking for setpgid... yes
> 
> checking for getpgid... yes
> 
> checking for ctermid... yes
> 
> checking for mkfifo... yes
> 
> checking for getrlimit... yes
> 
> checking for PSPELL support... no
> 
> checking whether to include QDOM support... no
> 
> checking for libedit readline replacement... no
> 
> checking for readline support... no
> 
> checking for recode support... no
> 
> checking whether to enable PHP sessions... yes
> 
> checking for mm support... no
> 
> checking for pread... yes
> 
> checking for pwrite... yes
> 
> checking whether pwrite works without custom declaration... yes
> 
> checking whether pread works without custom declaration... yes
> 
> checking whether to enable shmop support... no
> 
> checking for SNMP support... no
> 
> checking whether to enable UCD SNMP hack... no
> 
> checking whether to enable sockets support... no
> 
> checking for dlopen... yes
> 
> checking for pam_start in -lpam... yes
> 
> checking for getcwd... yes
> 
> checking for getwd... yes
> 
> checking for standard DES crypt... yes
> 
> checking for extended DES crypt... yes
> 
> checking for MD5 crypt... yes
> 
> checking for Blowfish crypt... yes
> 
> checking whether flush should be called explicitly after a bufferered
> io... yes
> 
> checking whether to enable aggregation support... no
> 
> checking for libswf support... no
> 
> checking for Sybase support... no
> 
> checking for Sybase-CT support... no
> 
> checking whether to enable System V semaphore support... no
> 
> checking whether to enable System V shared memory support... no
> 
> checking whether to enable tokenizer support... no
> 
> checking for vpopmail support... no
> 
> checking whether to enable WDDX support... no
> 
> checking whether byte ordering is bigendian... no
> 
> checking whether to enable XML support... yes
> 
> checking external libexpat install dir... no
> 
> checking for XMLRPC-EPI support... no
> 
> checking libexpat dir for XMLRPC-EPI... no
> 
> checking iconv dir for XMLRPC-EPI... no
> 
> checking whether to enable xslt support... no
> 
> checking for XSLT Sablotron backend... no
> 
> checking libexpat dir for Sablotron XSL support... no
> 
> checking enable JavaScript for Sablotron... no
> 
> checking for YAZ support... no
> 
> checking whether to include YP support... no
> 
> checking for ZIP support... no
> 
> checking whether to enable versioning... yes
> 
> checking which regex library to use... php
> 
> 
> 
> Configuring Zend
> 
> checking build system type... i386-portbld-freebsd5.0
> 
> checking for ld used by GCC... /usr/bin/ld
> 
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> 
> checking for /usr/bin/ld option to reload object files... -r
> 
> checking for BSD-compatible nm... /usr/bin/nm -B
> 
> checking how to recognise dependant libraries... pass_all
> 
> checking for object suffix... o
> 
> checking for executable suffix... no
> 
> checking command to parse /usr/bin/nm -B output... ok
> 
> checking for dlfcn.h... no
> 
> checking for ranlib... (cached) ranlib
> 
> checking for strip... strip
> 
> checking for objdir... .libs
> 
> checking for cc option to produce PIC... -fPIC
> 
> checking if cc PIC flag -fPIC works... yes
> 
> checking if cc static flag -static works... yes
> 
> checking if cc supports -c -o file.o... no
> 
> checking if we can lock with hard links... yes
> 
> checking if cc supports -fno-rtti -fno-exceptions... yes
> 
> checking whether the linker (/usr/bin/ld) supports shared libraries...
> yes
> 
> checking how to hardcode library paths into programs... immediate
> 
> checking whether stripping libraries is possible... yes
> 
> checking dynamic linker characteristics... freebsd5.0 ld.so
> 
> checking if libtool supports shared libraries... yes
> 
> checking whether to build shared libraries... yes
> 
> checking whether to build static libraries... no
> 
> checking whether -lc should be explicitly linked in... yes
> 
> creating libtool
> 
> checking bison version... 1.75 (ok)
> 
> checking for limits.h... (cached) no
> 
> checking for malloc.h... no
> 
> checking for string.h... (cached) no
> 
> checking for unistd.h... (cached) no
> 
> checking for stdarg.h... (cached) no
> 
> checking for sys/types.h... (cached) no
> 
> checking for sys/time.h... (cached) no
> 
> checking for signal.h... (cached) no
> 
> checking for unix.h... (cached) no
> 
> checking for dlfcn.h... (cached) no
> 
> checking for size_t... (cached) yes
> 
> checking return type of signal handlers... void
> 
> checking for dlopen in -ldl... (cached) no
> 
> checking for dlopen... (cached) yes
> 
> checking whether dlsym() requires a leading underscore in symbol
> names... no
> 
> checking for uint... yes
> 
> checking for ulong... no
> 
> checking for vprintf... (cached) yes
> 
> checking for 8-bit clean memcmp... yes
> 
> checking for working alloca.h... (cached) no
> 
> checking for alloca... (cached) yes
> 
> checking for memcpy... (cached) yes
> 
> checking for strdup... (cached) yes
> 
> checking for getpid... yes
> 
> checking for kill... yes
> 
> checking for strtod... yes
> 
> checking for strtol... yes
> 
> checking for finite... no
> 
> checking for fpclass... no
> 
> checking whether sprintf is broken... (cached) no
> 
> checking for finite... (cached) no
> 
> checking for isfinite... no
> 
> checking for isinf... yes
> 
> checking for isnan... yes
> 
> checking whether fp_except is defined... no
> 
> checking whether to enable experimental ZTS... no
> 
> checking whether to enable inline optimization for GCC... no
> 
> checking whether to enable a memory limit... no
> 
> checking whether to enable Zend debugging... no
> 
> checking for inline... inline
> 
> 
> 
> Configuring TSRM
> 
> checking for stdarg.h... (cached) no
> 
> 
> 
> Generating files
> 
> checking for working mkdir -p... yes
> 
> creating config_vars.mk
> 
> updating cache ./config.cache
> 
> creating ./config.status
> 
> creating php4.spec
> 
> creating Zend/Makefile
> 
> creating main/build-defs.h
> 
> creating pear/scripts/pear
> 
> creating pear/scripts/phpize
> 
> creating pear/scripts/php-config
> 
> creating pear/scripts/pearize
> 
> creating pear/scripts/phptar
> 
> creating TSRM/Makefile
> 
> creating main/php_config.h
> 
> fastgen.sh: creating sapi/Makefile
> 
> fastgen.sh: creating ext/Makefile
> 
> fastgen.sh: creating Makefile
> 
> fastgen.sh: creating pear/Makefile
> 
> fastgen.sh: creating main/Makefile
> 
> fastgen.sh: creating sapi/cli/Makefile
> 
> fastgen.sh: creating ext/zlib/Makefile
> 
> fastgen.sh: creating ext/ctype/Makefile
> 
> fastgen.sh: creating ext/mysql/Makefile
> 
> fastgen.sh: creating ext/pcre/Makefile
> 
> fastgen.sh: creating ext/pcre/pcrelib/Makefile
> 
> fastgen.sh: creating ext/posix/Makefile
> 
> fastgen.sh: creating ext/session/Makefile
> 
> fastgen.sh: creating ext/standard/Makefile
> 
> fastgen.sh: creating ext/xml/Makefile
> 
> fastgen.sh: creating ext/xml/expat/Makefile
> 
> fastgen.sh: creating sapi/apache/Makefile
> 
> fastgen.sh: creating regex/Makefile
> 
> creating number.c
> 
> creating number.h
> 
> creating main/internal_functions.c
> 
> creating main/internal_functions_cli.c
> 
> +--------------------------------------------------------------------+
> 
> | License:                                                           |
> 
> | This software is subject to the PHP License, available in this     |
> 
> | distribution in the file LICENSE.  By continuing this installation |
> 
> | process, you are bound by the terms of this license agreement.     |
> 
> | If you do not agree with the terms of this license, you must abort |
> 
> | the installation process at this point.                            |
> 
> +--------------------------------------------------------------------+
> 
> |                          *** NOTE ***                              |
> 
> |            The default for register_globals is now OFF!            |
> 
> |                                                                    |
> 
> | If your application relies on register_globals being ON, you       |
> 
> | should explicitly set it to on in your php.ini file.               |
> 
> | Note that you are strongly encouraged to read                      |
> 
> | http://www.php.net/manual/en/security.registerglobals.php          |
> 
> | about the implications of having register_globals set to on, and   |
> 
> | avoid using it if possible.                                        |
> 
> +--------------------------------------------------------------------+
> 
> 
> 
> 
> 
> 
> 
> Thank you for using PHP.
> 
> 
> 
> ===>  Building for mod_php4-4.2.3
> 
> Making all in Zend
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c
> zend_language_parser.c
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c
> zend_language_scanner.c
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c zend_ini_parser.c
> 
> zend_ini_parser.c: In function `ini_parse':
> 
> zend_ini_parser.c:899: warning: assignment makes pointer from integer
> without a cast
> 
> zend_ini_parser.c:902: warning: assignment makes pointer from integer
> without a cast
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c zend_ini_scanner.c
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c zend_alloc.c
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c zend_compile.c
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c zend_constants.c
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c zend_dynamic_array.c
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -pipe
> -march=pentium4 -I/usr/local/include  -prefer-pic -c ./zend_execute.c
> 
> /bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
> -I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
> -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
> -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe
> -march=pentium4 -I/usr/local/include -prefer-pic -c zend_execute_API.c
> 
> zend_execute_API.c: In function `zend_set_timeout':
> 
> zend_execute_API.c:782: storage size of `t_r' isn't known
> 
> zend_execute_API.c:788: `ITIMER_PROF' undeclared (first use in this
> function)
> 
> zend_execute_API.c:788: (Each undeclared identifier is reported only
> once
> 
> zend_execute_API.c:788: for each function it appears in.)
> 
> zend_execute_API.c: In function `zend_unset_timeout':
> 
> zend_execute_API.c:806: storage size of `no_timeout' isn't known
> 
> zend_execute_API.c:810: `ITIMER_PROF' undeclared (first use in this
> function)
> 
> *** Error code 1
> 
> 
> 
> Stop in /usr/ports/www/mod_php4/work/php-4.2.3/Zend.
> 
> *** Error code 1
> 
> 
> 
> Stop in /usr/ports/www/mod_php4/work/php-4.2.3.
> 
> *** Error code 1
> 
> 
> 
> Stop in /usr/ports/www/mod_php4.
> 
> *** Error code 1
> 
> 
> 
> Stop in /usr/ports/www/mod_php4.
> 
> 
> Script done on Fri Dec 20 21:49:43 2002
> 
> Thanks.
> 
> -----Original Message-----
> From: Jens Rehsack [mailto:rehsack@liwing.de] 
> Sent: Friday, December 20, 2002 9:25 PM
> To: Muhannad Asfour
> Cc: current@freebsd.org
> Subject: Re: mod_php4 4.2.3 under 5.0-CURRENT
> 
> Muhannad Asfour wrote:
> 
>>Hi, I was searching on groups.google.com recently to try to find out
> 
> how 
> 
>>to get mod_php4 compiled under 5.0-CURRENT, and I found your message
> 
> and 
> 
>>thought you might be of some assistance.  I recently built a new
> 
> server 
> 
>>and wanted to run 5.0-CURRENT on it.  I installed 5.0, cvsupped
> 
> sources, 
> 
>>rebuilt world, updated all of the ports.  Everything works great,
> 
> except 
> 
>>the mod_php4 won?t build (Yes, I e-mailed the port maintainer, no
> 
> reply 
> 
>>yet) :( .  I was wondering if you got it to build?  Here is my error
> 
> if 
> 
>>you might be able to help me:
>>
>> 
>>
>>===>  Building for mod_php4-4.2.3
>>
>>Making all in Zend
>>
>>/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I. 
>>-I../main   -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI 
>>-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI 
>>-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM  -O -pipe 
>>-march=pentium4 -I/usr/local/include -prefer-pic -c zend_execute_API.c
>>
>>zend_execute_API.c: In function `zend_set_timeout':
>>
>>zend_execute_API.c:782: storage size of `t_r' isn't known
>>
>>zend_execute_API.c:788: `ITIMER_PROF' undeclared (first use in this 
>>function)
>>
>>zend_execute_API.c:788: (Each undeclared identifier is reported only
> 
> once
> 
>>zend_execute_API.c:788: for each function it appears in.)
>>
>>zend_execute_API.c: In function `zend_unset_timeout':
>>
>>zend_execute_API.c:806: storage size of `no_timeout' isn't known
>>
>>zend_execute_API.c:810: `ITIMER_PROF' undeclared (first use in this 
>>function)
>>
>>*** Error code 1
>>
>> 
>>
>>Stop in /usr/ports/www/mod_php4/work/php-4.2.3/Zend.
>>
>>*** Error code 1
>>
>> 
>>
>>Stop in /usr/ports/www/mod_php4/work/php-4.2.3.
>>
>>*** Error code 1
>>
>> 
>>
>>Stop in /usr/ports/www/mod_php4.
>>
>>*** Error code 1
>>
>> 
>>
>>Stop in /usr/ports/www/mod_php4.
>>
>> 
>>
>>Any help would greatly be appreciated, since this is a brand new
> 
> server 
> 
>>that needs to be up and running ASAP.
> 
> 
> Hi Muhannad,
> 
> I just need a little bit more information to help you, cause I didn't 
> run into compiler errors but in linker errors.
> 
> Please send me your dmesg output and use the script(1) command to log 
> your entire mod_php4 build process and send me that output, too.
> 
> And please do not expect fast answers. It's 3:45 am here and I'm going 
> to sleep in near future :-)
> 
> Thanks,
> Jens

Hi Muhannad,

At first some things to questions:
1) Please use always reply-all to cc the list (if any cc'ed before)
2) Please avoid top posting
3) Read /usr/src/UPDATING before updating world and kernel (it seems you
    had not)
4) Read the homepage of the ports if they're fail, first

You've compiled www/mod_php4 with apache2 support. This is marked as 
experimental in php 4.2.x, fine work is expected at least with 4.3.

You either have to use apache13 or find the missing declaration include 
file(s) using find(1) and grep(1).

Jens
-- 
L     i  W     W     W  i                 Jens Rehsack
L        W     W     W
L     i   W   W W   W   i  nnn    gggg    LiWing IT-Services
L     i    W W   W W    i  n  n  g   g
LLLL  i     W     W     i  n  n  g   g    Friesenstraße 2
                                   gggg    06112 Halle
                                      g
                                  g   g
Tel.:  +49 - 3 45 - 5 17 05 91    ggg     e-Mail: <rehsack@liwing.de>
Fax:   +49 - 3 45 - 5 17 05 92            http://www.liwing.de/



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?3E03E15F.8060108>