Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 21 Aug 2003 10:16:20 +0900
From:      "lukek" <lukek@meibin.net>
To:        "FreeBSD" <freebsd-questions@freebsd.org>
Subject:   Re: Vinum Configuration File
Message-ID:  <000b01c36781$d855f560$080aa8c0@yujo>
References:  <000901c3677c$04b4cfb0$080aa8c0@yujo>

next in thread | previous in thread | raw e-mail | index | archive | help
Things got only marginally better, I now have errors about disks being full
can someone tell me where that is comming from the disks are for all intents
and purposes empty.

  6: sd length 76g drive d1
** 6 No space for  on d1: No space left on device
   7: sd length 76g drive d2
** 7 Unnamed sd is not associated with a plex: Invalid argument
   8: sd length 76g drive d3
** 8 Unnamed sd is not associated with a plex: Invalid argument
3 drives:
D d1                    State: up       Device /dev/ad1s1e      Avail:
154140/76316 MB (201%)
D d2                    State: up       Device /dev/ad2s1e      Avail:
76316/76316 MB (100%)
D d3                    State: up       Device /dev/ad3s1e      Avail:
76316/76316 MB (100%)

1 volumes:
V export                State: up       Plexes:       1 Size:          0  B

1 plexes:
P export.p0           S State: up       Subdisks:     0 Size:          0  B

-1 subdisks:

----- Original Message -----
From: "lukek" <lukek@meibin.net>
To: "FreeBSD" <freebsd-questions@freebsd.org>
Sent: 2003年8月21日 9:34
Subject: Vinum Configuration File


> Hello,
> I am having a bit of trouble getting the conf file correct. I have listed
> the devices and slice names but get the following error
>
> vinum -> create -f vinum.conf
>    1: drive d1 /dev/ad1s1e
> ** 1 Drive d1, invalid keyword: /dev/ad1s1e: Invalid argument
>    2: drive d2 /dev/ad2s1e
> ** 2 Drive d2, invalid keyword: /dev/ad2s1e: Invalid argument
>    3: drive d3 /dev/ad3s1e
> ** 3 Drive d3, invalid keyword: /dev/ad3s1e: Invalid argument
> 0 drives:
> 1 volumes:
> V export                State: down     Plexes:       1 Size:        149
GB
>
> 1 plexes:
> P export.p0          R5 State: faulty   Subdisks:     3 Size:        149
GB
>
> 3 subdisks:
> S export.p0.s0          State: crashed  PO:        0  B Size:         74
GB
> S export.p0.s1          State: crashed  PO:       32 kB Size:         74
GB
> S export.p0.s2          State: crashed  PO:       64 kB Size:         74
GB
>
> The offending conf file looks like this
>
> drive d2 /dev/ad2s1e
> drive d3 /dev/ad3s1e
> volume export
> plex org raid5 32k
> sd length 76319MB drive d1
> sd length 76319MB drive d2
> sd length 76319MB drive d3
>
> disklabel for the disks in question look like this
>
> tamachi# disklabel -r ad1
> # /dev/ad1c:
> type: ESDI
> disk: ad1s1
> <snip>
> 8 partitions:
> #        size   offset    fstype   [fsize bsize bps/cpg]
>   c: 156296322        0    unused        0     0        # (Cyl.    0 -
> 9728*)
>   e: 156296322        0    4.2BSD     2048 16384    89  # (Cyl.    0 -
> 9728*)a
>
> tamachi# disklabel -r ad2
> # /dev/ad2c:
> type: ESDI
> disk: ad2s1
> <snip>
> 8 partitions:
> #        size   offset    fstype   [fsize bsize bps/cpg]
>   c: 156296322        0    unused        0     0        # (Cyl.    0 -
> 9728*)
>   e: 156296322        0    4.2BSD     2048 16384    89  # (Cyl.    0 -
> 9728*)
>
> tamachi# disklabel -r ad3
> # /dev/ad3c:
> type: ESDI
> disk: ad3s1
> <snip>
> 8 partitions:
> #        size   offset    fstype   [fsize bsize bps/cpg]
>   c: 156296322        0    unused        0     0        # (Cyl.    0 -
> 9728*)
>   e: 156296322        0    4.2BSD     2048 16384    89  # (Cyl.    0 -
> 9728*)
>
> Can someone throw me a life ring here ? The fileserver has been down for a
> day now due to hardware failures on the raid device and I am trying to use
> Vinum to create a raid device with out much luck.
>
> Also, If I decided to do away with a certain configuration I have been
using
> resetconfig , will this allow me to start from scratch again  ?
>
> Appreciate any assistance someone can offer on this.
>
> Thanks
>
> LukeK
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01c36781$d855f560$080aa8c0>