Date: Mon, 09 Jun 2003 20:34:11 -0400 From: Chuck Swiger <cswiger@mac.com> To: Chris Shenton <chris@shenton.org> Cc: freebsd-stable@freebsd.org Subject: Re: Via EPIA Mini-ITX motherboard Message-ID: <3EE52783.2030306@mac.com> In-Reply-To: <87u1ay50n3.fsf@Pectopah.shenton.org> References: <006601c29cab$ec3a9c80$0100000a@D9NLZD0J> <20030608152726.GA26871@tuatara.fishballoon.org> <87u1ay50n3.fsf@Pectopah.shenton.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Chris Shenton wrote: > Scott Mitchell <scott+freebsd@fishballoon.org> writes: >> - The onboard vr(4) Ethernet is now working reliably at 100Mbps? > > Seems fine, but I'm running 5.0-CURRENT. Can't comment on the USB or > Firewire, sorry. Hi-- I just got 5.1 going on a EPIA-6000m, using a AMS S668-epm case with a 150W PS and 512 MB of Buffalo (Hynix) PC2700 DDR RAM. Aside from having a heck of a time with the memory-- basicly, I get one chance after resetting the CMOS to adjust the memory settings, or upon next power-on it locks, things seem pretty good. The default BIOS settings try to use the SPD for the clock rate, I gather, and setting the timing to manually match the 133 FSB (PC2100 speed) makes it happier. Anyway, I just tried connecting two USB2 devices, which worked okay: umass0: IOI MEDIA BAY USB2.0, rev 2.00/1.13, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic STORAGE DEVICE 0113> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present [ ... ] umass0: detached umass0: vendor 0x0d7d HandySteno 2.0, rev 2.00/0.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <GENERIC USB Disk 2.0 U204> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 248MB (507904 512 byte sectors: 64H 32S/T 248C) # dd if=/dev/da0s1 of=/dev/null bs=512 count=10000 10000+0 records in 10000+0 records out 5120000 bytes transferred in 50.251656 secs (101887 bytes/sec) # dd if=/dev/da0s1 of=/dev/null bs=5120 count=1000 1000+0 records in 1000+0 records out 5120000 bytes transferred in 9.033170 secs (566800 bytes/sec) ...but only seem to be running at USBv1 speeds. One of the firewire controllers didn't seem to want to work either, but I tried the other and got: fwohci0: <VIA VT6306> port 0xd000-0xd07f mem 0xea000000-0xea0007ff irq 10 at dev ice 13.0 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:40:63:00:00:02:9f:f6 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:40:63:02:9f:f6 sbp0: <SBP2/SCSI over firewire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: Initiate bus reset fwohci0: Initiate bus reset fwohci0: phy int fwohci0: node_id=0xc800ffc0, gen=155, CYCLEMASTER mode fw_xfer_done: pending fw_xfer_done: pending fw_xfer_done: pending fw_xfer_done: pending fw_xfer_done: pending fw_xfer_done: pending fw_xfer_done: pending fw_xfer_done: pending [ ...lots and lots of these... ] firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fw_attach_dev: 37 pending handlers called fwohci0: BUS reset fwohci0: node_id=0x8800ffc0, gen=156, non CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me) firewire0: root node is not cycle master capable firewire0: bus manager 0 (me) fwohci0: BUS reset fwohci0: node_id=0xc800ffc1, gen=157, CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) firewire0: bus manager 1 (me) firewire0: New S400 device ID:0010b920003db9ac da1 at sbp0 bus 0 target 0 lun 0 da1: <Maxtor 5000DV v1.00.00 0000> Fixed Simplified Direct Access SCSI-4 device da1: 50.000MB/s transfers, Tagged Queueing Enabled da1: 156333MB (320171008 512 byte sectors: 255H 63S/T 19929C) # dd if=/dev/da1s1 of=/dev/null bs=512 count=100000 100000+0 records in 100000+0 records out 51200000 bytes transferred in 45.923180 secs (1114905 bytes/sec) # dd if=/dev/da1s1 of=/dev/null bs=5120 count=10000 10000+0 records in 10000+0 records out 51200000 bytes transferred in 5.586739 secs (9164559 bytes/sec) -- -Chuck
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3EE52783.2030306>