Date: Wed, 17 May 2006 11:01:52 +0800 From: Chris Leung <chris@q-station.net> To: freebsd-questions@freebsd.org Subject: Dell PE1850 kernel panic Message-ID: <446A9220.9000405@q-station.net>
next in thread | raw e-mail | index | archive | help
Dear all,
I have 5 pieces of the same configuration of Dell PE1850 dual Xeon 3Ghz
machine excpet 2 of them is 2GB Ram instead of 1GB. They are running
similar set of application on FreeBSD 5.4 platform with custom kernel with
IPFILTER, IPFIREWALL and SMP enabled.
I have the problem as follow:
1 machine running very well and stable with HTT enable.
2 machines will be freeze when running around several hours but machines
become stable when turn off HTT.
2 machines will freeze when running around several hours whatever HTT
setting. And machine seem good if running with Kernel without option SMP.
I would like to know if anyone having the similar experience as us?
Thanks for your attention.
The attached is the output of the dmesg of the HTT enabled machine
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #1: Mon Apr 3 16:05:19 HKT 2006
root@xxx.xxx.xx:/usr/obj/usr/src/sys/XXXDUAL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073479680 (1023 MB)
avail memory = 1040932864 (992 MB)
ACPI APIC Table: <DELL PE BKC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
amr0: <LSILogic MegaRAID 1.51> mem
0xfe9e0000-0xfe9fffff,0xf80f0000-0xf80fffff irq 46 at device 14.0 on pci2
amr0: <LSILogic PERC 4e/Si> Firmware 521S, BIOS H430, 256MB RAM
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xecc0-0xecff mem 0xfe6e0000-0xfe6fffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:14:22:1b:94:45
em0: Speed:N/A Duplex:N/A
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xdcc0-0xdcff mem 0xfe4e0000-0xfe4fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:14:22:1b:94:46
em1: Speed:N/A Duplex:N/A
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff irq
16 at
device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf irq
19 at
device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf irq
18 at
device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem
0xec000-0xeffff,0xcc000-0xccfff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub3: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub3: 2 ports with 2 removable, self powered
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default
to accept, logging limited to 1 packets/entry by default
acd0: CDROM <HL-DT-ST GCR-8240N/1.06> at ata0-master PIO4
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34680MB (71024640 sectors) RAID 1 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/amrd0s1a
Chris
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?446A9220.9000405>