Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 02 May 2000 22:37:41 +0800
From:      Trent Nelson <tpnelson@echidna.stu.cowan.edu.au>
To:        current@FreeBSD.org
Subject:   Problematic PNP probing, faulty /compat/linux/sbin/ldconfig.
Message-ID:  <390EE835.2345B624@student.cowan.edu.au>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------50BDD9A96E1B91F5FDD4D416
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

	Originally cvsup'd and made world successfully on the 30th and found
the following problems to occur. Cvsup'ing to a new -current and a new
kernel still sees the same things occurring.

	Everything's detected at boot time hassle free (printer, sound, network
card) so I have no idea what the PNP info stuff is in dmesg. I've got an
Intel SunRiva M/B w/ the onboard TNT + ES1371 (detected correctly as can
be seen) and a PCI ethernet card - nothing else is plugged in to the
box.

	I've mentioned the ldconfig segfault problem as I'm under suspicion I
have to do something extra (other than make world) to update the Linux
kernel modules? Note, kldload/unload of linux.ko works hassle free - as
soon as /usr/sbin/linux is executed from rc.i386,
/compat/linux/sbin/ldconfig is exec'd and cores. I'll re-compile with
debugging if requested.

	
FreeBSD breaker.org 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Wed May  3
05:20:41 WST 2000     root@:/usr/src/sys/compile/breaker_02May2000  i386

	Thanks in advance.

	Regards,

		Trent.
--------------50BDD9A96E1B91F5FDD4D416
Content-Type: text/plain; charset=us-ascii;
 name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg"

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed May  3 05:20:41 WST 2000
    root@:/usr/src/sys/compile/breaker_02May2000
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (232.79-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
  Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 66977792 (65408K bytes)
avail memory = 60973056 (59544K bytes)
Preloaded elf kernel "kernel" at 0xc0346000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0
pcm0: <AudioPCI ES1371> port 0xef00-0xef3f irq 9 at device 12.0 on pci0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> port 0xee80-0xeebf mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 9 at device 14.0 on pci0
fxp0: Ethernet address 00:04:ac:53:46:dd
fxp0: supplying EUI64: 00:04:ac:ff:fe:53:46:dd
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Canon BJC-265SP/1.00> PRINTER BJ,LQ,BJL,BJRaster,BSCC
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown0: <PNP0c01> at iomem 0-0x9fbff,0x9fc00-0x9ffff,0xe0000-0xfffff,0x3fe0000-0x3ff7fff,0x3ff8000-0x3ffffff,0xfec00000-0xfec00fff,0xfee00000-0xfee00fff,0xfff80000-0xffffffff on isa0
unknown1: <PNP0c01> at iomem 0x100000-0x3fdffff on isa0
unknown: <PNP0000> can't assign resources
unknown2: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on isa0
unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown5: <PNP0800> at port 0x61 on isa0
unknown6: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown7: <PNP0c02> at port 0x4d0-0x4d1,0xcf8-0xcff,0x10-0x1f,0x22-0x3f,0x50-0x52,0x72-0x77,0x91-0x93,0xa2-0xbe,0x400-0x43f,0x440-0x44f on isa0
unknown8: <PNP0c02> at port 0x290-0x297,0x370-0x371 on isa0
unknown: <PNP0501> can't assign resources
unknown9: <PNP0c02> on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown10: <PNP0a03> on isa0
ad0: 8063MB <QUANTUM FIREBALL CR8.4A> [16383/16/63] at ata0-master using UDMA33
ad1: 3079MB <QUANTUM FIREBALL ST3.2A> [6256/16/63] at ata0-slave using UDMA33
acd0: CD-RW <Hewlett-Packard CD-Writer Plus 8200> at ata1-master using WDMA2
acd1: CDROM <CD-524E> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s1a
WARNING: run /dev/MAKEDEV before 2000-06-01 to get rid of block devices
pid 159 (ldconfig), uid 0: exited on signal 11 (core dumped)

--------------50BDD9A96E1B91F5FDD4D416
Content-Type: text/plain; charset=us-ascii;
 name="breaker_02May2000"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="breaker_02May2000"

# $FreeBSD: src/sys/i386/conf/Breaker_30Apr2000 breaker Exp $

machine		i386
cpu		I686_CPU
ident		breaker
maxusers	512
options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
device		isa
device		eisa
device		pci
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
options 	ATA_STATIC_ID		#Static device numbering
options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices
options		SOFTUPDATES
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12
device		vga0	at isa?
device		pcm
pseudo-device	splash
device		sc0	at isa?
device		npx0	at nexus? port IO_NPX irq 13
device		apm0    at nexus? disable flags 0x20 # Advanced Power Management
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif	4	# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)
pseudo-device	bpf		# Berkeley packet filter
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic

--------------50BDD9A96E1B91F5FDD4D416--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?390EE835.2345B624>