Date: Fri, 18 Nov 2005 03:11:17 GMT From: Arthur Hartwig <arthur.hartwig@nokia.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/89214: FreeBSD 6.0 disc 1 boot fails to find CDROM Message-ID: <200511180311.jAI3BHsN038668@www.freebsd.org> Resent-Message-ID: <200511180320.jAI3KCGS024147@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 89214
>Category: i386
>Synopsis: FreeBSD 6.0 disc 1 boot fails to find CDROM
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Nov 18 03:20:12 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator: Arthur Hartwig
>Release: 5.4/6.0
>Organization:
Nokia
>Environment:
>Description:
I successfully installed FreeBSD 5.4 from CDROM on a system with a GigaByte GA-8I945P-G motherboard, 1x SATA Hard drive and 1x PATA CDROM.
I tried to do an Install Upgrade from disc 1 that I downloaded last night. sysinstall runs but when I select CD/DVD for Installation Media I get the message No CD/DVD devices found!
(The bottom of the Choose Installation Media screen says "Press F1 for more information on the various media types" but pressing F1 seems to have no effect, it certainly doesn''t change what is displayed on the screen.)
But I booted from a CD and FreeBSD 5.4 finds the CD and can successfully read from the CD. Perhaps this problem is related to that in PR 88929.
I tried the procedure described in section 2.2.3 of the current FreeBSD handbook to display the last few hundred lines of the device probe output and here is an extract:
atapci0: <ITE IT8212F UDMA133 controller> port 0x9010-0x9017,0x9400-0x9403,0x9810-0x9817,0x9c00-0x9c03,0xa00-0xa000f irq 22 at device 6.0 on pci4
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
isa0: ...
atapci1 <Intel ICH7 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
..
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a3070c
ad0: 76318MB <Seagate ST380817AS 3.42> at ata0-master SATA150
Trying to mount root from ufs:/dev/md0
For comparison, here's the dmesg output from a FreeBSD 5.4 custom kernel on the same box: Notice the CD drive is reported in 5.4 but not in 6.0
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #9: Tue Oct 11 15:53:03 EST 2005
hartwig@oz-net-11.nes.nokia.com:/usr/obj/usr/src/sys/oz-net-11
ACPI APIC Table: <GBT AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2813.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf44 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073676288 (1023 MB)
avail memory = 1041117184 (992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5789 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xeb000000-0xeb00ffff irq 18 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:14:85:04:b2:e1
uhci0: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 23 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 19 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 18 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xeb104000-0xeb1043ff irq 23 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci0: <ITE IT8212F ATA133 controller> port 0xa000-0xa00f,0x9c00-0x9c03,0x9810-0x9817,0x9400-0x9403,0x9010-0x9017 irq 22 at device 6.0 on pci4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <GENERIC ATA controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x500-0x51f irq 19 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd7fff,0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad0: 76318MB <ST380817AS/3.42> [155058/16/63] at ata0-master UDMA33
acd0: CDRW <LITE-ON CD-RW SOHR-5239S/2S05> at ata1-slave PIO4
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511180311.jAI3BHsN038668>