Date: Thu, 7 Oct 1999 11:23:12 -0400 (EDT) From: strben@altavista.net To: fug-washdc@Sytex.Net, freebsd-questions@FreeBSD.ORG Subject: Please help with a sound problem Message-ID: <9910071123127C.11983@weba6.iname.net>
next in thread | raw e-mail | index | archive | help
Hello, I am having problems getting sound to work on this PC. Sorry my first and second message data was not readable... Is this one OK. Please reply to me directly because I am NOT a member of this "questions@FreeBSD.org"; mailing list. I do read the "Stable" list. Thanks in advance for your time! Ben Hacker, Jr. My configuration is based upon: http://www.dvl-software.com/freebsd/sound.htm Below I am providing info from: - uname -a - cat /dev/sndstat - dmesg - pnpinfo For the error about "pcm0" in dmesg output... pcm0 is defined in my kernel config. When I tried to change it to pcm1, dmesg said pcm2 was configured correctly and pcm1 now had the error that was pcm0. The device number just jumped up by one. I therefore put it back to the original settings. -=*=- -=*=- -=*=- -=*=- -=*=- $ uname -a FreeBSD bhacker1.isp.com 3.3-STABLE FreeBSD 3.3-STABLE #5: Tue Oct 5 22:52:37 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 i386 -=*=- -=*=- -=*=- -=*=- -=*=- $ cat /dev/sndstat FreeBSD Audio Driver (981002) Oct 1 1999 07:05:48 Installed devices: pcm1: <SoundBlaster 16 4.13> at 0x220 irq 5 dma 1:5 sequencer1: <???> at 0x388 (not functional) -=*=- -=*=- -=*=- -=*=- -=*=- $ dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #4: Fri Oct 1 07:08:15 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping = 5 Features=0x3<FPU,VME> real memory = 25165824 (24576K bytes) config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di bt0 config> di aha0 config> di adv0 config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x388 config> pnp 1 1 os disable config> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 config> pnp 1 3 os disable config> q avail memory = 21659648 (21152K bytes) Preloaded elf kernel "kernel" at 0xc02f4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f409c. Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x001e17b3 Comp ID: PNP0600 [0x0006d041] pcm1 (SB16pnp <SB16 PnP> sn 0x001e17b3) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 pcm0 not probed due to I/O address conflict with pcm1 at 0x220 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <QUANTUM LPS540A> wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc0: unit 1 (wd1): <QUANTUM FIREBALL1080A> wd1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <FX120T/b03>, removable, intr, dma, iordis acd0: drive speed 2066KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s2a syncing disks... 10 9 4 done Rebooting... Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #5: Tue Oct 5 22:52:37 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping = 5 Features=0x3<FPU,VME> real memory = 25165824 (24576K bytes) config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di bt0 config> di aha0 config> di adv0 config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x388 config> pnp 1 1 os disable config> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 config> pnp 1 3 os disable config> q avail memory = 21659648 (21152K bytes) Preloaded elf kernel "kernel" at 0xc02f4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f409c. Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x001e17b3 Comp ID: PNP0600 [0x0006d041] pcm1 (SB16pnp <SB16 PnP> sn 0x001e17b3) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 pcm0 not probed due to I/O address conflict with pcm1 at 0x220 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <QUANTUM LPS540A> wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc0: unit 1 (wd1): <QUANTUM FIREBALL1080A> wd1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): <FX120T/b03>, removable, intr, dma, iordis acd0: drive speed 2066KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 plip0: <PLIP network interface> on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s2a -=*=- -=*=- -=*=- -=*=- -=*=- $ su root -c "pnpinfo" Password: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CTL0028 (0x28008c0e), Serial Number 0x001e17b3 PnP Version 1.0, Vendor Version 16 Device Description: Creative SB16 PnP Logical Device ID: CTL0031 0x31008c0e #0 Device Description: Audio TAG Start DF Good Configuration IRQ: 5 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 [16-bit addr] I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 11 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CTL2011 0x11208c0e #1 Compatible Device ID: PNP0600 (0006d041) Device Description: IDE TAG Start DF Good Configuration IRQ: 10 - only one type (true/edge) I/O Range 0x168 .. 0x168, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x36e .. 0x36e, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 11 - only one type (true/edge) I/O Range 0x1e8 .. 0x1e8, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x3ee .. 0x3ee, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 10 11 12 15 - only one type (true/edge) I/O Range 0x100 .. 0x1f8, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x300 .. 0x3fe, alignment 0x2, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 15 - only one type (true/edge) I/O Range 0x170 .. 0x170, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x376 .. 0x376, alignment 0x1, len 0x1 [16-bit addr] TAG End DF Logical Device ID: PNPffff 0xffffd041 #2 Device Description: Reserved I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x1 [16-bit addr] Logical Device ID: CTL7001 0x01708c0e #3 Compatible Device ID: PNPb02f (2fb0d041) Device Description: Game I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8 [16-bit addr] End Tag Successfully got 72 resources, 4 logical fdevs -- card select # 0x0001 CSN CTL0028 (0x28008c0e), Serial Number 0x001e17b3 Logical device #0 IO: 0x0220 0x0000 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 5 0 DMA 1 5 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 Logical device #2 IO: 0x0620 0x0a20 0x0e20 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #3 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 $ -=*=- -=*=- -=*=- -=*=- Ben Hacker, Jr ~ strben@altavista.net -=*=- ---------------------------------------------------------------- Get your free email from AltaVista at http://altavista.iname.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9910071123127C.11983>