From owner-freebsd-questions  Mon Nov  4 09:16:19 1996
Return-Path: owner-questions
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.5/8.7.3) id JAA03895
          for questions-outgoing; Mon, 4 Nov 1996 09:16:19 -0800 (PST)
Received: from netcom5.netcom.com (delta1@netcom5.netcom.com [192.100.81.113])
          by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id JAA03887
          for <questions@freebsd.org>; Mon, 4 Nov 1996 09:16:15 -0800 (PST)
Received: from localhost (delta1@localhost) by netcom5.netcom.com (8.6.13/Netcom)
	id LAA05477; Mon, 4 Nov 1996 11:16:06 -0600
Message-Id: <199611041716.LAA05477@netcom5.netcom.com>
To: "Erik A. Pearson" <epearson@olac.berkeley.edu>
cc: questions@freebsd.org
Subject: Re: FreeBSD & Adaptec 1542CP 
Date: Mon, 04 Nov 96 11:16:06 -0800
From: Randall Raemon <delta1@netcom.com>
Sender: owner-questions@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

In message <Pine.WNT.3.95.961104085846.-394021A-100000@ep.olac.Berkeley.EDU> 
"Erik A. Pearson" writes 

> I am hoping to get FreeBSD working with an Adaptec 1542CP SCSI card, but
> it doesn't seem to be working, and I've now been informed that FreeBSD
> 2.1.5 does not support the 5142CP, but that later fixes may address this
> issue. Could you provide some guidance please?

I have several 1542CP boards installed in various machines. They work
fine. However, I have disabled the plug-and-play feature, so the
boards work like 1542CF boards. On the board, flip sw1 to the "On" 
position to disable the PnP stuff.

--
Randall Raemon
delta1@netcom.com