Date: Tue, 18 May 1999 17:13:04 -0400 (EDT) From: Chuck Robey <chuckr@picnic.mat.net> To: freebsd-scsi@FreeBSD.ORG Subject: ahc boot messages Message-ID: <Pine.BSF.4.10.9905181706210.25906-100000@picnic.mat.net>
next in thread | raw e-mail | index | archive | help
I recently got my new DK440LX motherboard cranking (it's great!) and I've not seen the ahc driver since back in 1.1.5.1 days. It went real smoothly getting it going (well, one f-u, but we won't talk about that :-) .... anyhow, I noticed the boot messages produced by the ahc driver, it seemed excessively verbose. The DK440LX has the 7895 controller which has 2 busses, and all targets on both buses get a line each to announce their status. I get a LOT of these lines: ahc0: Selection Timeout on A:1. 1 SCBs aborted ahc1: Selection Timeout on A:0. 1 SCBs aborted ahc0: Selection Timeout on A:2. 1 SCBs aborted ahc1: Selection Timeout on A:2. 1 SCBs aborted 32 lines of this. Isn't this really excessive? For anyone? Even if the messages are needed (and I like having the message) it wouldn't be all that difficult to come up with a format to squeeze all messages from each buss into 2 lines (one header, one data line) so all the info could still be displayed, but in a far more readable format. Am I off here? ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@picnic.mat.net | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run picnic (FreeBSD-current) (301) 220-2114 | and jaunt (Solaris7). ----------------------------+----------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9905181706210.25906-100000>