Date: Thu, 15 Feb 2007 10:54:39 +0100 From: Palle Girgensohn <girgen@pingpong.net> To: Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> Cc: freebsd-questions@freebsd.org, Brian Smith <brian@dbsoft.org> Subject: Re: if_nfe on nVidia chipset Message-ID: <0DE3471FD22AB5D08E64ACD1@rambutan.pingpong.net> In-Reply-To: <45D256F2.4040702@se.hiroshima-u.ac.jp> References: 458956C6.6080004@se.hiroshima-u.ac.jp <45CBCB98.8010607@dbsoft.org> <B5CDCFF1-8FA3-4489-A6DB-C3E3837788AF@pingpong.net> <45D256F2.4040702@se.hiroshima-u.ac.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Great news: I can confirm that it works fine when the e1000phy patch was removed on this system. I have not tried this on the system that *did* work fine with the patch, though. Thanks! Regards, Palle --On onsdag, februari 14, 2007 09.25.22 +0900 Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> wrote: > Hello, > > Please try to use generic PHY driver (ukphy) instead of e1000phy; i.e., > use nfe without the patch for e1000phy. > > Regards, > --- > Shigeaki Tagashira > > Palle Girgensohn wrote: >> Here's a problematic machine: >> >> nfe0@pci0:8:0: class=0x068000 card=0xcb8410de chip=0x037310de rev=0xa2 >> hdr=0x00 >> vendor = 'NVIDIA Corporation' >> class = bridge >> nfe1@pci0:9:0: class=0x068000 card=0xcb8410de chip=0x037310de rev=0xa2 >> hdr=0x00 >> vendor = 'NVIDIA Corporation' >> class = bridge >> >> >> >> Just the other day, on a machine running amd64, I got it working with >> no problems: >> >> nfe0@pci0:8:0: class=0x068000 card=0x82391043 chip=0x037310de rev=0xa2 >> hdr=0x00 >> vendor = 'NVIDIA Corporation' >> class = bridge >> nfe1@pci0:9:0: class=0x068000 card=0x82391043 chip=0x037310de rev=0xa2 >> hdr=0x00 >> vendor = 'NVIDIA Corporation' >> class = bridge >> >> Both run FreeBSD-6.2 release with the patches added. Same motherboards, >> m2n sli-deluxe. So, might it have something to do with i386 vs. amd64? >> For me, it works with amd64, and not with i386 (on at least two >> machines). It is detected properly on all machines, but the network >> does not work. >> >> >> Regards, >> Palle >> >> >> 9 feb 2007 kl. 02.17 skrev Brian Smith: >> >>> Hi Palle, >>> >>> I am having the same issue. I just installed FreeBSD 7.0 snapshot >>> from January to see if that helps because the latest patch requires >>> FreeBSD 6.2 and I had been running 6.1. But still getting (none) for >>> the media type, but everything else *looks* like it is working. >>> However nothing responds. Can you run pciconf -l -v and compare it to >>> my IDs? >>> >>> nfe0@pci0:16:0: class=0x068000 card=0xcb8410de chip=0x037310de >>> rev=0xa2 hdr=0x00 >>> vendor = 'Nvidia Corp' >>> device = 'MCP55 Ethernet' >>> class = bridge >>> nfe1@pci0:17:0: class=0x068000 card=0xcb8410de chip=0x037310de >>> rev=0xa2 hdr=0x00 >>> vendor = 'Nvidia Corp' >>> device = 'MCP55 Ethernet' >>> class = bridge >>> >>> Thanks, >>> Brian Smith >>> >>>> Hello, >>>> >>>> Sorry, there's no change, it still acts the same way. >>>> >>>> media: Ethernet autoselect (none) >>>> status: active >>>> >>>> and the network does not work. No mediaopts work. >>>> >>>> Regards, >>>> Palle >>>> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0DE3471FD22AB5D08E64ACD1>