Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 30 Sep 2013 16:25:41 +0530
From:      "Desai, Kashyap" <Kashyap.Desai@lsi.com>
To:        Michael Fuckner <michael@fuckner.net>, "dgilbert@interlog.com" <dgilbert@interlog.com>, FreeBSD-SCSI <freebsd-scsi@freebsd.org>
Cc:        "McConnell, Stephen" <Stephen.McConnell@lsi.com>
Subject:   RE: LSI 9300-4i4e support
Message-ID:  <B2FD678A64EAAD45B089B123FDFC3ED76076822406@inbmail01.lsi.com>
In-Reply-To: <52486553.4020004@fuckner.net>
References:  <52473B95.2030705@interlog.com> <1450642901.368121.1380440131388.open-xchange@com4.strato.de> <52484D60.60105@interlog.com> <52486553.4020004@fuckner.net>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Michael:

LSI 9300 card will work with <mpslsi3> driver which you have posted here fr=
om lsi's external site works for you.=20

Prints which you have pointed for CAM status error are resolved in our late=
st driver, but still not posted to external site because we are waiting for=
 Internal driver GA.

Regarding upstream submission of <mpslsi3> I have seen that Steve McConnnel=
l is working with Ken D Merry to get driver inbox.

Added Steve M.. to give you more insight on mpslsi3 inbox.

` Kashyap

> -----Original Message-----
> From: owner-freebsd-scsi@freebsd.org [mailto:owner-freebsd-
> scsi@freebsd.org] On Behalf Of Michael Fuckner
> Sent: Sunday, September 29, 2013 11:07 PM
> To: dgilbert@interlog.com; FreeBSD-SCSI
> Subject: Re: LSI 9300-4i4e support
>=20
> Or even add support for 9.2 which will be released tomorrow.
>=20
> Regards,
>   Michael!
>=20
> On 9/29/2013 5:55 PM, Douglas Gilbert wrote:
> > The mpslsi3.ko modules provided by LSI in their support pages for the
> > 9300-4i4e does work in 9.1 Release sufficiently well to bring up the
> > system.
> >
> > There is no sensible report about it discovering this HBA in dmesg,
> > just a thousand or so of these:
> >    kernel: (probe1022:mpslsi30:0:1023:0): INQUIRY. CDB: 12 0 0 0 24 0
> >    kernel: (probe1022:mpslsi30:0:1023:0): CAM status: Invalid Target
> ID
> >    kernel: (probe1022:mpslsi30:0:1023:0): Error 22, Unretryable error
> >
> > But it does get there in the end.
> >
> >
> > LSI, if you are reading this, why not add 9.1 Release to your driver
> > support zip file for the 9300 family?
> >
> > Doug Gilbert
> >
> > On 13-09-29 03:35 AM, Michael Fuckner wrote:
> >> Hi,
> >> did you try the driver provided by lsi? It seems to be for FreeBSD
> >> 9.0, but perhaps it is also working.
> >> http://www.lsi.com/products/storagecomponents/Pages/LSISAS9300-4i4e.a
> >> spx
> >> ->
> >> Support & Downloads -> Driver -> FreeBSD?
> >> Seems like 12GBit is not supported inbox right now- I am still
> >> waiting for my 12GBit HBA Card :( Regards,
> >>   Michael!
> >>
> >>  > Douglas Gilbert <dgilbert@interlog.com> hat am 28. September 2013
> >> um 22:27 geschrieben:
> >>  >
> >>  >
> >>  > I've noticed that 9.1 does not recognize a LSI 9300-4i4e  > SAS
> >> HBA (relatively new: 12 Gbps). Do any more recent  > RCs or betas
> >> have support for it?
> >>  >
> >>  > Doug Gilbert
> >>  > _______________________________________________
> >>  > freebsd-scsi@freebsd.org mailing list  >
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> >>  > To unsubscribe, send any mail to
> >> "freebsd-scsi-unsubscribe@freebsd.org"
> >
>=20
> _______________________________________________
> freebsd-scsi@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"





Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?B2FD678A64EAAD45B089B123FDFC3ED76076822406>