Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Sep 1996 13:42:14 -0500 (CDT)
From:      "S(pork)" <spork@super-g.com>
To:        ricky@jsys.mozcom.com
Cc:        questions@freebsd.org
Subject:   Re: Network Card Problem
Message-ID:  <Pine.LNX.3.92.960909134113.16322B-100000@super-g.inch.com>
In-Reply-To: <199609091045.KAA24106@gamespot.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
I had some problems at first with Plug and Play enabled.  I disabled it
with the DOS utility that came with the card.  I then set the IRQ to
something not being used (found that info during boot time...).  At the
boot: prompt, I typed "-c"  and then "visual".  I went through each driver
and deleted any unused drivers.  Also manually set ep0 to the IRQ I had
chosen.  After that, everything went perfect.

Now if I could only get past that nasty compile error I'm getting about
bt0 when I try to compile the kernel...

Charles


On Mon, 9 Sep 1996, Ian Kallen wrote:

> What are the error messages?  The 3c509b-tp does work with the ep0
> driver in 2.1 (they worked for me anyway).
>
> > Date:          Mon, 9 Sep 1996 15:11:18 +0800
> > From:          "Ricardo M. Codizar" <ricky@jsys.mozcom.com>
> > To:            questions@freebsd.org
> > Subject:       Network Card Problem
>
> >
> > We have a 3Com Etherlink III 3C509B-TP installed in our PC, but there
> > are some error messages during the probing of devices.
> >
> > Is it supported by FreeBSD 2.1 ?
> > If it is supported please help us to solve our problem .....
> >
> >
> > 			Ricky Codizar
> >
> >
> Ian Kallen                           ian@gamespot.com
>      Director of Technology & Web Administration
>             http://www.gamespot.com
>




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.92.960909134113.16322B-100000>