Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Dec 2000 08:18:03 -0800
From:      Julian Elischer <julian@elischer.org>
To:        Mark Wright <markscottwright@hotmail.com>
Cc:        freebsd-net@freebsd.org
Subject:   Re: Confusing netgraph error
Message-ID:  <3A37A13B.E903D658@elischer.org>
References:  <LAW2-F51DH0EjxtTA7L0000ef8f@hotmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Mark Wright wrote:
> 
> I'm trying to get frame relay working with a lmc1200 card, and I'm getting
> the following error:
> 
> sj# ngctl mkpeer lmc0: frame_relay rawdata downstream
> sj# ngctl mkpeer lmc0:rawdata lmi dlci0 auto0
> sj# ngctl mkpeer lmc0:rawdata rfc1490 dlci15 downstream
> ngctl: send msg: No such file or directory
> 
> What does that mean? Should I be concerned that ifconfig -a doesn't reveal
> the lmc0?  Or does it show up only after I do a 'ngctl interface'?  It shows
> up in dmesg:
> 
> lmc0: <Lan Media Coporation T1> port 0xf880-0xf8ff mem 0xffbefc00-0xffbefc7f
> irq 11 at device 16.0 on pci0
> lmc0: pass 2.2, serial 00:60:99:00:23:6d
> lmc0: driver is using old-style compatability shims
> 
> I'm using the 20001210 snapshot, and the following changes were made to my
> kernel config:
> 
> options         NETGRAPH                #enable netgraph networking
> options         NETGRAPH_SOCKET         #enable netgraph networking
> options         NETGRAPH_FRAME_RELAY    #enable frame relay
> options         NETGRAPH_LMI            #enable link management
> ...
> device          lmc             # LanMedia card

duh, I didn't notice but archie caught it..
you apparently haven;t compiled in the rfc1490 node..
no probelm, it's a module so just type:

kldload ng_rfc1490

and try again.

> 
> Mark
> 
> markscottwright@hotmail.com
> 
> _____________________________________________________________________________________
> Get more from the Web.  FREE MSN Explorer download : http://explorer.msn.com
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-net" in the body of the message

-- 
      __--_|\  Julian Elischer
     /       \ julian@elischer.org
    (   OZ    ) World tour 2000
---> X_.---._/  presently in:  Budapest
            v



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A37A13B.E903D658>