Date: Mon, 10 Sep 2012 13:30:54 -0700 From: YongHyeon PYUN <pyunyh@gmail.com> To: Sean Bruno <seanbru@yahoo-inc.com> Cc: John <jwd@freebsd.org>, David Christensen <davidch@freebsd.org>, "freebsd-net@freebsd.org" <freebsd-net@freebsd.org> Subject: Re: Dell PowerEdge R820 Broadcom BCM57800 support Message-ID: <20120910203054.GA3557@michelle.cdnetworks.com> In-Reply-To: <1347050759.3479.8.camel@powernoodle.corp.yahoo.com> References: <20120816165651.GA39870@FreeBSD.org> <1347050759.3479.8.camel@powernoodle.corp.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Sep 07, 2012 at 01:45:59PM -0700, Sean Bruno wrote: > On Thu, 2012-08-16 at 09:56 -0700, John wrote: > > Hi Folks, > > > > I have an R820 I'm testing. The system seems to boot up fine, but > > no network adapters show up. From pciconf -l : > > > > none4@pci0:1:0:0: class=0x020000 card=0x1f5c1028 chip=0x168a14e4 rev=0x10 hdr=0x00 > > none5@pci0:1:0:1: class=0x020000 card=0x1f5c1028 chip=0x168a14e4 rev=0x10 hdr=0x00 > > none6@pci0:1:0:2: class=0x020000 card=0x1f671028 chip=0x168a14e4 rev=0x10 hdr=0x00 > > none7@pci0:1:0:3: class=0x020000 card=0x1f671028 chip=0x168a14e4 rev=0x10 hdr=0x00 > > > > which appears to be these: > > > > Broadcom BCM57800 NetXtreme II 10 GigE 1f5c > > Broadcom BCM57800 NetXtreme II 1 GigE 1f67 The chipid is 0x168a14e4 which indicates vendor is Broadcom and device is NetXtreme II BCM57800 10G gigabit ethernet. I guess bxe(4) would be right driver to pick up the controller but it seems there is no support for BCM57800 in bxe(4) at this moment. Probably David can add more comment on this(CCed). > > > > Does anyone have any experience with these? > > > > Thanks, > > John > > > > John: > > Hey, I'm currently testing a patchset that enables the use of the 1Gig > adapter via bge(4). I'm not sure about the 10Gig adapter though, is > that bxe(4) > > At this time, there no functional version of bge(4) that works on a > stable release. You'd have the best luck in compiling your own kernel > from stable/9 and applying the following updates from > > > > http://people.freebsd.org/~yongari/bge/if_bge.c > > > http://people.freebsd.org/~yongari/bge/if_bgereg.h > > > http://people.freebsd.org/~yongari/bge/brgphy.c > > You'll need to overwrie brgphy.c in sys/dev/mii and move if_bge.c > if_bgereg.h to sys/dev/bge and recompile your kernel. bge(4) does not support Broadcom NetXtreme II BCM57800 controllers. It wouldn't make any difference.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120910203054.GA3557>