Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Aug 2007 19:54:11 -0500
From:      Novembre <novembre@gmail.com>
To:        "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>
Subject:   Re: NTFS-3G not mounting the partition during boot
Message-ID:  <3b47caa90708101754vefde793pdeb906f7c5a57aa7@mail.gmail.com>
In-Reply-To: <3b47caa90708082149g680e3304g965c15300b764236@mail.gmail.com>
References:  <3b47caa90708061959v42c02e3fy8e97137cd2a30504@mail.gmail.com> <46B7F338.30304@riderway.com> <3b47caa90708071953t515be42etef87a9c72c00dd54@mail.gmail.com> <3b47caa90708072031x5aca7c5ncd7f6780b70a7f4b@mail.gmail.com> <20070808081245.D37694@obelix.home.rakhesh.com> <3b47caa90708082149g680e3304g965c15300b764236@mail.gmail.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 8/8/07, Novembre <novembre@gmail.com> wrote:
>
>
>
> On 8/7/07, Rakhesh Sasidharan <rakhesh@rakhesh.com> wrote:
> >
> >
> > > Starting ntfsmount.
> > > /etc/rc: DEBUG: run_rc_command: _doit:
> > /usr/local/bin/ntfs-3g  /dev/ad0s1
> > > /mnt/w
> > > indows
> > > fuse: failed to exec mount program: No such file or directory
> > > ----------
> > >
> > > I don't exactly know what it means by "fuse: failed to exec mount
> > program:
> > > No such file or directory" since /usr/local/bin/ntfs-3g exists,
> > /dev/ad0s1
> > > is my Windows 2000 partition, and I have created /mnt/windows myself.
> >
> > Why is the mount point /mnt/windows broken over two lines? If that's the
> > actual output from fuse (and not broken coz of some wrapping while
> > emailing) then that could be the problem.
> >
> > Regards,
> > Rakhesh
> >
>
>
> The line is broken, since it had reached the end of line. It just wrapped
> the rest of the line into the next line. I don't think it's the actual
> output from fusefs. Here's an interesting thing though:
>
> # cat /var/log/messages
> ...
> Aug  8 23:37:10 homedesktop root: /etc/rc: INFO: checkyesno:
> ntfsmount_enable is set to YES.
> Aug  8 23:37:10 homedesktop root: /etc/rc: INFO: run_rc_command: _doit:
> /usr/local/bin/ntfs-3g  /dev/ad0s1 /mnt/windows -o locale=en_US.UTF-8
> Aug  8 23:37:11 homedesktop ntfs-3g[923]: Version 1.710
> Aug  8 23:37:11 homedesktop ntfs-3g[923]: Mounted /dev/ad0s1 (Read-Write,
> label "", NTFS 3.0)
> Aug  8 23:37:11 homedesktop ntfs-3g[923]: Cmdline options:
> locale=en_US.UTF-8
> Aug  8 23:37:11 homedesktop ntfs-3g[923]: Mount options:
> noatime,silent,allow_other,fsname=/dev/ad0s1
> ...
>
> So it seems the mount process was successful?! Indeed, /dev/fuse0 was
> created as well...
> Then why do I see the following message when the system boots?
> -----
> fuse: failed to exec mount program: No such file or directory
> -----
>
> I'm not sure if this is something to be worried about or not, but there
> are two spaces between "ntfs-3f" and "/dev/ad0s1" when the command runs. I
> have set up the startup script as mentioned before, so I'm not sure what's
> happening here as well...
>
> Thanks
>


I didn't get any replies, so I'll send this again. Hopefully, someone will
help.
The problem is explained above...

Thanks :)



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?3b47caa90708101754vefde793pdeb906f7c5a57aa7>