Date: Sat, 9 Apr 2005 12:07:46 -0700 (PDT) From: Ed Lee <metrojunky@yahoo.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/79729: umass, da0 not detected by devfs for SimpleDrive Message-ID: <20050409190746.25201.qmail@web54509.mail.yahoo.com> Resent-Message-ID: <200504091910.j39JAMCp091429@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 79729 >Category: i386 >Synopsis: umass, da0 not detected by devfs for >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: update >Submitter-Id: current-users >Arrival-Date: Sat Apr 09 19:10:21 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Ed Lee >Release: FreeBSD 5.3-RELEASE i386 >Organization: Columbia University >Environment: System: FreeBSD cabroncito 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Thu Apr 7 13:50:00 EDT 2005 root@cabroncito:/usr/obj/usr/src/sys/MYKERNEL i386 cabroncito# camcontrol inquiry da0 camcontrol: cam_lookup_pass: CAMGETPASSTHRU ioctl failed cam_lookup_pass: No such file or directory cam_lookup_pass: either the pass driver isn't in your kernel cam_lookup_pass: or da0 doesn't exist SimpleTech SimpleDrive Deluxe P/N:STI-U2F36/160 connected by USB 2.0 DMESG: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE #0: Thu Apr 7 13:50:00 EDT 2005 root@cabroncito:/usr/obj/usr/src/sys/MYKERNEL Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.04-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 267845632 (255 MB) avail memory = 252448768 (240 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82845G host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1cc0-0x1cdf irq 10 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1ce0-0x1cff irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ulpt0: Brother Industries product 0x000d, rev 1.00/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xe0204000-0xe0205fff irq 10 at device 1.0 on pci2 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: Ethernet address: 00:0b:db:17:2d:77 bfe0: [GIANT-LOCKED] cbb0: <TI4510 PCI-CardBus Bridge> irq 10 at device 4.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xe0200000-0xe0203fff,0xe0206000-0xe02067ff irq 10 at device 4.1 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:c0:4f:34:04:03:48:41 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:c0:4f:03:48:41 fwe0: Ethernet address: 02:c0:4f:03:48:41 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x2020-0x202f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) cpu0 on motherboard orm0: <ISA Option ROMs> at iomem 0xe3800-0xe3fff,0xdc000-0xdffff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0f13> can't assign resources (irq) Timecounter "TSC" frequency 2392042428 Hz quality 800 Timecounters tick every 10.000 msec acd0: CDRW <MATSHITA CD-RW/DVD-ROM UJDA740/1.03> at ata0-master UDMA33 ad2: 28615MB <IC25N030ATCS04-0/CA3OA72A> [58140/16/63] at ata1-master UDMA100 Mounting root from ufs:/dev/ad2s2a Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000) , rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000) , rev 1.00 port 1 addr 2: full speed, self powered, config 1, product 0x000d(0x000d), Brot her Industries(0x04f9), rev 1.00 port 2 powered cabroncito# ls /dev acd0 cuaa0 mem sysmouse ttyva ad2 cuaia0 net ttyd0 ttyvb ad2s1 cuala0 net1 ttyid0 ttyvc ad2s2 devctl net2 ttyld0 ttyvd ad2s2a devstat net3 ttyp0 ttyve ad2s2b fd network ttyp1 ttyvf ad2s2c fido nfs4 ttyp2 ulpt0 ad2s2d fw0 null ttyp3 unlpt0 ad2s2e fw0.0 pci ttyv0 urandom ad2s2f fwmem0 psm0 ttyv1 usb agpgart fwmem0.0 ptyp0 ttyv2 usb0 ata geom.ctl ptyp1 ttyv3 usb1 atkbd0 io ptyp2 ttyv4 xpt0 bpf0 kbd0 ptyp3 ttyv5 zero bpsm0 klog random ttyv6 console kmem stderr ttyv7 consolectl log stdin ttyv8 ctty mdctl stdout ttyv9 >Description: I have a SimpleTech SimpleDrive external Hard Drive (160 GB) via USB 2.0, and although the USB controllers are fine, I don't see that umass is found by devfs, and neither does da0 appear in /dev. >How-To-Repeat: I can't mount the drive. >Fix: __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/ >Release-Note: >Audit-Trail: >Unformatted: SimpleDrive
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050409190746.25201.qmail>