Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 02 Nov 1999 09:10:32 -0800
From:      Doug Barton <Doug@gorean.org>
To:        Matthew Dillon <dillon@apollo.backplane.com>
Cc:        freebsd-current@FreeBSD.ORG
Subject:   Re: minor heads up - /etc/make.conf{,.local} being moved
Message-ID:  <381F1B08.AF4E0585@gorean.org>
References:  <199910271928.MAA35915@apollo.backplane.com> <381F1722.3F85DA1@simplenet.com> <199911021703.JAA51793@apollo.backplane.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Matthew Dillon wrote:
> 
> :>     sent to the CVS meisters to get /usr/src/etc/make.conf moved.
> :>
> :>     make will dump out with an appropriate error and instructions if you
> :>     update your source tree and still have an /etc/make.conf.local.
> :
> :       I like this change (kind of) but is it really necessary to cause make
> :to exit if there is a make.conf.local? Why not have it read all 3? One
> :of the things we talked about at the 'Con was that a three tiered system
> :works well for rc.conf when you have a lot of machines sharing similar
> :configuration details, but with some unique elements present on each
> :machine. Perhaps I'm missing something, but how can make.conf.local be a
> :bad thing?
> :
> :Doug
> 
>     I think it is necessary to make it exit for now, because what we are
>     really doing is a net-0 gain in files... turning what used to be
>     functionality in /etc/make.conf.local into /etc/make.conf.  The intent is
>     not to add a third file.  If the intent were to add a third configuration
>     file then, sure, we could allow all three.  But that isn't my intent.

	Ok, well put me on record as wanting three files. While I still have
some reservations about the whole /etc/defaults thing, I believe that if
we are going to use it we should use it to full advantage, offering
people more functionality, not less. Unless I am missing something, the
worst thing that could happen if someone had all three files is that the
settings they want will get read from /etc/make.conf.local. The only
time this causes a problem is if you change a default setting for
something that was in the "old" make.conf file (evil), or change the
name of a define in /etc/defaults/make.conf (_really_ evil). 

	I'm a little behind in my freebsd mail, so forgive me if this has been
covered. If not, I hope this will spark some conversation.

Thanks,

Doug
-- 
"Stop it, I'm gettin' misty." 

    - Mel Gibson as Porter, "Payback"


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?381F1B08.AF4E0585>