Date: Fri, 15 Oct 1999 11:01:13 +0200 From: "Lutz Rabing" <LutzRab@omc.net> To: freebsd-questions@freebsd.org Subject: AMD K7 with ASUS K7M MB Message-ID: <199910150901.LAA08288@office.omc.net>
next in thread | raw e-mail | index | archive | help
I'm trying to run 3.3-STABLE on an ASUS K7M board with with
an ATHLON 500 CPU. What I get is programms using floting point
terminating with "floating point exception".
Same thing with 3.3.RELEASE.
This happens to awk, top ping ....
Otherwise the system seems work. Has anyone seen this behavior
or knows how to fix it?
I'll append dmesg output. Since I'm not on "freebsd-questions" please answer
directly.
Thanks,
Lutz
-------------
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.3-STABLE #3: Fri Oct 15 03:34:33 CEST 1999
root@new33.omc.net:/usr/src/sys/compile/OMCa
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 503525810 Hz
CPU: AMD-K7(tm) Processor (503.53-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x612 Stepping = 2
Features=0x81f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,MMX>
AMD Features=0xc0400000<<b22>,<b30>,3DNow!>
real memory = 134217728 (131072K bytes)
avail memory = 128000000 (125000K bytes)
Preloaded elf kernel "kernel" at 0xc0247000.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1022 device=7006)> rev 0x23 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=1022 device=7007)> rev 0x01 on pci0.1.0
chip2: <PCI to ISA bridge (vendor=1106 device=0686)> rev 0x14 on pci0.4.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on pci0.4.1
xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 10 on pci0.15.0
xl0: Ethernet address: 00:10:5a:cc:6d:19
xl0: autoneg complete, link status good (half-duplex, 10Mbps)
Probing for devices on PCI bus 1:
vga0: <ATI model 5246 graphics accelerator> rev 0x00 int a irq 11 on pci1.5.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <WDC WD102AA>, DMA, 32-bit, multi-block-16
wd0: 9787MB (20044080 sectors), 19885 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 0 (atapi): <CD-58E/1.1C>, removable, accel, ovlap, dma, iordis
acd0: drive speed 1377KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s1a
pid 86771 (top), uid 0: exited on signal 8
Mit freundlichen Gruessen,
Lutz Rabing -OMCnet-
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910150901.LAA08288>