Date: Thu, 8 Jun 2000 14:29:25 -0500 (EST) From: Darshan Randhir Purohit <purohit@cs.purdue.edu> To: freebsd-questions@freebsd.org Subject: sound problems in 3.4 Message-ID: <Pine.GSO.4.10.10006081410550.29255-100000@ector.cs.purdue.edu>
next in thread | raw e-mail | index | archive | help
hi,
I have a freebsd 3.4 machine. with a sb 16 pci sound card and a
hauppauge wintv-go video capture card ( also pci ) . I have the sound card
working in most conditions. i.e i can play files stored on my machine ( mp3
, real audio etc ).
the problem is that i still have not been able to listen to anything
coming from the outside.
*) i cant listen to any real audio from the net.
*) i cant listen the sound of a video fed into the video capture card.
*) i cant transmit or listen to audio through vat.
is there anything important that i am missing?
I have the following lines in my kernel config file.
** sound ***
device pcm0 at pci? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr
device sbxvi0 at pci? drq 5
** video capture **
device bktr0 at pci? port ? tty irq 5 drq 1 vector pcmintr
controller iicbus0
controller iicbb0
controller smbus0
*********
it seems we have to add a
pseudo-device vat_audio
to the kernel config , in order to get vat running. but it says that the
pseudo device is unknown. i have also MAKEDEV ed vat.
I have been struggling with this since a few days. can somebody please
help me out with this.
here is my dmesg output.
There seems to be an irq conflict between NIC and wintv card. how do i
get rid of this.
I HAVE NOT SUBSCRIBED TO THE LIST , SO KINDLY REPLY TO THE ABOVE ADDRESS.
THANKS IN ADVANCE.
**********************************************************
Preloaded elf kernel "kernel" at 0xc0383000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc038309c.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x08 int a irq 9 on pci0.14.0
fxp0: Ethernet address 00:d0:b7:69:01:57
es1: <AudioPCI ES1371> rev 0x08 int a irq 10 on pci0.15.0
pcm1: using I/O space register mapping at 0x1040
es1371: codec vendor CRY revision 19
es1371: codec features Bass & Treble Headphone out 20bit DAC 18bit ADC
es1371: stereo enhancement: Crystal Semiconductor 3D Stereo Enhancement
bktr0: <BrookTree 878> rev 0x11 int a irq 9 on pci0.16.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 38101 B410
Hauppauge WinCast/TV, Philips NTSC tuner.
Probing for devices on PCI bus 1:
vga0: <Matrox model 0525 graphics accelerator> rev 0x04 int a irq 11 on pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALLP LM10.2>
wd0: 9797MB (20066251 sectors), 19906 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-6702B/1005>, removable, accel, dma, iordis
acd0: drive speed 8268KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
cs0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
aic0 not found
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Initializing PC-card drivers: ed ep fe sio
changing root device to wd0s1a
*********************************************
Darshan R Purohit
Graduate Student
Dept of Computer Sciences
Purdue University
Residence Address
101 Russell Street, Apt 21
W Lafayette, Indiana 47906
Phone - (R) 765-746-2702
Email purohit@cs.purdue.edu
darshanrp@hotmail.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.10.10006081410550.29255-100000>