Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 21 Feb 2010 00:44:50 +0300
From:      Slawa Olhovchenkov <slw@zxy.spb.ru>
To:        Pyun YongHyeon <pyunyh@gmail.com>
Cc:        Nick Rogers <ncrogers@gmail.com>, stable@freebsd.org
Subject:   Re: trap 12: page fault while in kernel mode on 8.0-RELEASE (possibly bge(4) related)
Message-ID:  <20100220214450.GV55307@zxy.spb.ru>
In-Reply-To: <20100219211201.GL11675@michelle.cdnetworks.com>
References:  <20100218213213.GD11675@michelle.cdnetworks.com> <20100218215039.GK55307@zxy.spb.ru> <20100219001913.GE11675@michelle.cdnetworks.com> <20100219055129.GL55307@zxy.spb.ru> <20100219122415.GR55307@zxy.spb.ru> <20100219190359.GJ11675@michelle.cdnetworks.com> <20100219191103.GT55307@zxy.spb.ru> <20100219200647.GK11675@michelle.cdnetworks.com> <20100219201359.GU55307@zxy.spb.ru> <20100219211201.GL11675@michelle.cdnetworks.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 19, 2010 at 01:12:01PM -0800, Pyun YongHyeon wrote:

> Normally you should not have any FCS errors, it could be related
> with signal quality and these errors might not be correctly
> counted.

I can't check cable and switch counters on bge1 before Feb 24.

> > 3. packets don't lost on sources at Aug'09
> 
> Since I don't have BCM5704 hardware it's hard to find which
> revision may affect to this issue. Could you narrow down which
> revision number started showing the issue?

I am don't update source between Aug'09 and Feb 16.

4. Packets don't lost immediately after reboot.

PS: I got kernel panic.

===
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0x18
fault code              = supervisor read data, page not present
instruction pointer     = 0x20:0xffffffff802eb3b7
stack pointer           = 0x28:0xffffff80001c66e0
frame pointer           = 0x28:0xffffff8  01c6740
code segment            = base 0x0, limi  0xfffff, type 0x1b
                        = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 724 (named)
[thread pid 724 tid 100051 ]
Stopped at      m_copym+0x37:   movl    0x18(%r12),%eax
db> panic
panic: from debugger
cpuid = 0
Uptime: 1d5h55m33s
Physical memory: 2039 MB
Dumping 1448 MB: 1433 1417 1401



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100220214450.GV55307>