Date: Thu, 28 Feb 2008 13:15:47 -0800 From: Sean Bruno <sbruno@miralink.com> To: KAYVEN RIESE <kayve@sfsu.edu> Cc: freebsd-acpi@freebsd.org Subject: Re: ACPI errors in dmesg Message-ID: <47C72483.1080709@miralink.com> In-Reply-To: <Pine.SOC.4.64.0802281305500.13228@libra.sfsu.edu> References: <Pine.SOC.4.64.0802281044070.5517@libra.sfsu.edu> <47C716EE.3040909@miralink.com> <Pine.SOC.4.64.0802281305500.13228@libra.sfsu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
KAYVEN RIESE wrote: > > On Thu, 28 Feb 2008, Sean Bruno wrote: >> KAYVEN RIESE wrote: >>> >>> I have ACPI errors in my dmesg, and I don't know what to do about >>> it. Do I need new hardware? If so, can I get more specific >>> information? >>> How do I fix this? >>> >>> Follows is the first part of dmesg with the errors: >>> >>> >>> kv_bsd#dmesg >>> Copyright (c) 1992-2007 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >>> 1994 >>> The Regents of the University of California. All rights >>> reserved. >>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>> FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007 >>> root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >>> Timecounter "i8254" frequency 1193182 Hz quality 0 >>> CPU: Intel(R) Pentium(R) M processor 1.73GHz (600.02-MHz 686-class CPU) >>> Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 >>> >>> Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> >>> >>> Features2=0x180<EST,TM2> >>> AMD Features=0x100000<NX> >>> real memory = 1072955392 (1023 MB) >>> avail memory = 1040961536 (992 MB) >>> kbd1 at kbdmux0 >>> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, >>> RF5413) >>> acpi0: <A M I OEMRSDT> on motherboard >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.ACS_] (Node 0xc4ba8440), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.AC__._INI] >>> (Node 0xc4bac0a0), AE_NOT_EXIST >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> acpi0: Power Button (fixed) >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler >>> ACPI-1304: *** Error: Method execution failed >>> [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc4ba8420), AE_NOT_EXIST >>> ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] >>> (Node 0xc4baf420), AE_NOT_EXIST >>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >>> >> Can you please post your motherboard model and BIOS revision? > > I'm not really sure how to do that, but here is a free photoserver > where I have pictures of my BIOS: > > http://www.monkeyview.net/id/965/fsck/bios/index.vhtml > > (click on one of the more interesting of the 49 photos there for > a better look) > > Here is a super album with more pictures: > > http://www.monkeyview.net/id/965/fsck/index.vhtml > > Will the rest of the dmesg output help? Here that is > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xefffffff at > device 0.0 o > n pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f > irq 11 at > device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f > irq 5 at d > evice 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f > irq 10 at > device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem > 0xffaffc00-0xffafffff i > rq 10 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub3: 6 ports with 6 removable, self powered > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > bge0: <Broadcom BCM5705 A3, ASIC rev. 0x3003> mem > 0xff9f0000-0xff9fffff irq 4 at > device 0.0 on pci2 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX > -FDX, auto > bge0: Ethernet address: 00:11:d8:22:c9:91 > cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > cbb1: <RF5C476 PCI-CardBus Bridge> at device 1.1 on pci2 > cardbus1: <CardBus bus> on cbb1 > pccard1: <16-bit PCCard bus> on cbb1 > fwohci0: <Ricoh R5C552> mem 0xff9ef800-0xff9effff irq 10 at device 1.2 > on pci2 > fwohci0: OHCI version 1.0 (ROM=1) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:e0:18:00:03:26:4c:e9 > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:e0:18:26:4c:e9 > fwe0: Ethernet address: 02:e0:18:26:4c:e9 > fwe0: if_start running deferred for Giant > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > pci2: <network> at device 2.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH4 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x37 > 6,0xffa0-0xffaf at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pcm0: <Intel ICH4 (82801DB)> port 0xee00-0xeeff,0xe000-0xe03f mem > 0xffaff800-0xf > faff9ff,0xffaff400-0xffaff4ff irq 4 at device 31.5 on pci0 > pcm0: <SigmaTel STAC9750/51 AC97 Codec> > pci0: <simple comms, generic modem> at device 31.6 (no driver attached) > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > battery0: <ACPI Control Method Battery> on acpi0 > battery1: <ACPI Control Method Battery> on acpi0 > acpi_button1: <Power Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > sio0: configured irq 3 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0 > sio0: type 16550A > ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 > drq 3 on ac > pi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: Logitech USB Optical Mouse, rev 2.00/43.01, addr 2, iclass 3/1 > ums0: 8 buttons and Z dir. > Timecounter "TSC" frequency 600024447 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 114473MB <Hitachi HTS541612J9AT00 SBDOA70H> at ata0-master UDMA100 > acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/TC51> at ata1-master UDMA33 > Trying to mount root from ufs:/dev/ad0s2a > bge0: link state changed to DOWN > cpu0: Cx states changed > cpu0: Cx states changed > bge0: link state changed to UP > pid 54590 (npviewer.bin), uid 1001: exited on signal 11 (core dumped) > > >> >> Sean >> >> > > *----------------------------------------------------------* > Kayven Riese, BSCS, MS (Physiology and Biophysics) > (415) 902 5513 cellular > http://kayve.net > Webmaster http://ChessYoga.org > *----------------------------------------------------------* Ok, your BIOS version is 0208 I think. Who made your computer? Maybe from the make and model of the computer we can determine if there is a BIOS update for it. Sean
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47C72483.1080709>